07 BFII F6 Front rotors and pads

[sexyxe]

Gday fellas,

After a price on rotors and pads for the front of my F6. Just 4 pots up front.
Not after anything special, std gear was plenty for me stopping wise, just need something round and as good as std to fill the hole behind the rims.

Thanks in advance.

[FLOORED]

Originally Posted by sexyxe

Gday fellas,

After a price on rotors and pads for the front of my F6. Just 4 pots up front.
Not after anything special, std gear was plenty for me stopping wise, just need something round and as good as std to fill the hole behind the rims.

Thanks in advance.

Thanks for the enquiry and replacement rotors and pads for front 4 pot brembo's are as follows?
Front slotted rotors from $600 a pair
Front brake pads from $150 to $315

[sexyxe]

With the pads, is that 150 -350 a corner or a 'set'?

Thanks for the speedy reply.

[FLOORED]

Originally Posted by sexyxe

With the pads, is that 150 -350 a corner or a 'set'?

Thanks for the speedy reply.

It is a set so will do both front calipers.

[sexyxe]

Nice. I'll give you lads a call in the very near future to get something sorted. Thanks!

[FLOORED]

Originally Posted by sexyxe

Nice. I'll give you lads a call in the very near future to get something sorted. Thanks!

No worries

[sexyxe]

Hey mate,

Just a follow up. What is a set of slotted and drilled rotors worth - DBA part number 42102XS and 42102SR/SL. And any postage for rotors and pads to Toowoomba/Oakey, QLD 4401.

Thanks!

[FLOORED]

Originally Posted by sexyxe

Hey mate,

Just a follow up. What is a set of slotted and drilled rotors worth - DBA part number 42102XS and 42102SR/SL. And any postage for rotors and pads to Toowoomba/Oakey, QLD 4401.

Thanks!

42102XS $700 a pair
or
42102S $600 a pair
Brake pads from $150 a set
To send the goods to a residential address at 4401 it is $60 but is cheaper to send to a business address in Toowoomba 4350.

[sexyxe]

Hey fellas,

Time for the rear to be changed now.

Do the rotors need to be replaced? I recall hearing that the rotors needed to be changed and couldn't be machined. Is there any truth to that?

Im after a set of rear pads, same as standard would be fine. If the rear rotors needed to be replaced, Im just after slotted, drilled wouldn't be required.

Cheers!

[FLOORED]

Originally Posted by sexyxe

Hey fellas,

Time for the rear to be changed now.

Do the rotors need to be replaced? I recall hearing that the rotors needed to be changed and couldn't be machined. Is there any truth to that?

Im after a set of rear pads, same as standard would be fine. If the rear rotors needed to be replaced, Im just after slotted, drilled wouldn't be required.

Cheers!

Do you have the Brembo 4 pots on the rear or the PBR single piston with the 328mm vented disc?

[sexyxe]

Ah... Well, they aren't Brembos on the rear.

So, I guess that narrows it down to the PBRs.

[FLOORED]

Originally Posted by sexyxe

Ah... Well, they aren't Brembos on the rear.

So, I guess that narrows it down to the PBRs.

PBR 328mm rear brake pads from $90 and the rear DBA T3 slotted discs are $215 each.

[sexyxe]

Hey fellas. Sign me up for a pair of those rotors and pads to suit.

If I could get a total price with postage to a business address in Toowoomba 4350 that would be appreciated.

Cheers

[FLOORED]

Originally Posted by sexyxe

Hey fellas. Sign me up for a pair of those rotors and pads to suit.

If I could get a total price with postage to a business address in Toowoomba 4350 that would be appreciated.

Cheers

PM Sent

[sexyxe]

Thanks Gents.

Brakes arrived today. Super quick once again!