|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
05-07-2022, 07:39 PM
|
#1 | ||
|
mechanical novice hopeful
 Join Date: Feb 2018
Location: Melbourne
Posts: 508
|
I can't find a thread already for this? Maybe the info is buried in a more general thread somewhere?
Its for a high series bonnet. And I've got 2 with the same problem. The Lip/Trim is plastic. There are 5x 10mm nuts under the front edge of the bonnet. Then there is a double headed screw/bolt, which screws into the plastic Lip/Trim, then bolts through the bonnet to the nut. Obviously moisture gets into the bolt/not and they seize. The screw then undoes from the plastic Lip/Trim. Leaving the double headed screw/bolt attached to the nut and stuck in the bonnet. I've tried vice grips to clamp the screw head. But I can't get enough purchase to break the thread. Have tried WD40 with no improvement. Before I give up and grind them out, are there any obvious solutions I am missing? Thankyou. |
||
|
|
|
08-07-2022, 10:07 PM
|
#2 | ||
|
Next upgraded Mk1 Leopard
  
Join Date: Jan 2005
Location: Sydney, in the burbs
Posts: 4,902
 
|
a bit of heat
__________________
Plastic Surgery 1 AUII Monsoon Blue How 2's: Change rear view mirror, Install backfire valve, Change foam front seats, Install auto transmission cooler, Replace Trans Shift Globe, Remove front door Trim, Paint AU headlights, install door spears, Premium Rear Parcel Shelf, go here...
 |
||
|
|
|
| This user likes this post: |
|
17-07-2022, 10:36 AM
|
#3 | ||
|
mechanical novice hopeful
Join Date: Feb 2018
Location: Melbourne
Posts: 508
|
Thankyou for the suggestion. In hindsight I should have thought that through for myself. Haven't been able to make time yet to try it but will report back when I have.
|
||
|
|
|
| This user likes this post: |
|
17-07-2022, 06:05 PM
|
#4 | ||
|
Next upgraded Mk1 Leopard
Join Date: Jan 2005
Location: Sydney, in the burbs
Posts: 4,902
|
Just watch the paint.
__________________
Plastic Surgery 1 AUII Monsoon Blue How 2's: Change rear view mirror, Install backfire valve, Change foam front seats, Install auto transmission cooler, Replace Trans Shift Globe, Remove front door Trim, Paint AU headlights, install door spears, Premium Rear Parcel Shelf, go here...
|
||
|
|
|
| This user likes this post: |
Remove AU2 Hood/Bonnet Front Lip/Trim with Rusty Nuts
Linear Mode
