Dev3HL Cam on eBay

FRDGAL · 20-01-2005, 03:32 AM

Saw this on eBay....

http://cgi.ebay.com.au/ws/eBayISAPI....&rd=1&tc=photo

The Mighty Red · 20-01-2005, 01:07 PM

i would of thought the dev3hl cam would give more than 15kw.

Paris Hilton · 20-01-2005, 06:26 PM

that is being sold by neb, a member of these forums...

loxxr6 · 20-01-2005, 06:42 PM

i would of thought the dev3hl cam would give more than 15kw.

It does. Its meant to bring a car up to the 140ish mark if I remember correctly.

neb · 20-01-2005, 08:26 PM

its meant to be 145rwkw...

THAT IS NOT ME SELLING IT.... imposter!!

Casper · 20-01-2005, 08:31 PM

146rwkw.....with headwork and the rest of the kit.
"Scavenger" Headers (Extractors), Modified Cat and 2.5" Hi-Performance mandrel bent exhaust, Hi-flow intake mods, DEV 3+ High Lift cam kit, Special Valve Springs, Valve train modifications, Vernier adjustable Timing Gear, Special Spark Plugs & Leads. Maximum Street Performance without cylinder head change.

The cam alone wont do that.

5speedeb · 20-01-2005, 08:44 PM

its in the trading post $450 i think

neb · 20-01-2005, 09:38 PM

dev3hl is the last kit before they start doing head work.. so basically that ebay thing is selling everything that you need (apart from intake and exhaust). for a dev3hl kit.

MickyB · 20-01-2005, 09:38 PM

Wonder how it would go on my xr6 along with some pacemaker comp headers, should be able to pump out 140rwkw?

neb · 20-01-2005, 09:40 PM

yep i think you should be able to as long as everything else is running right

Casper · 20-01-2005, 09:40 PM

Quote:

Originally Posted by neb

dev3hl is the last kit before they start doing head work.. so basically that ebay thing is selling everything that you need (apart from intake and exhaust). for a dev3hl kit.

True..I didnt read the ebay add correctly. Still, the exhaust (or any decent exhaust) would make up around half of the increase 10 146rwkw. So the cam alone is probably only worth 15-20rwkw if that.

neb · 20-01-2005, 10:04 PM

yeah well you would definately need extractors and exhaust to get the most out of it

TIKFD6 · 20-01-2005, 11:29 PM

Quote:

Originally Posted by MickyB

Wonder how it would go on my xr6 along with some pacemaker comp headers, should be able to pump out 140rwkw?

That cam should easy do it for you.

MickyB · 21-01-2005, 05:59 PM

Well the cam is sitting in my garage, I will probably wait until I can save for extractors and get it all done at once. Although I am kind of curious as to how it would perform with the stock exhaust manifold.

TIKFD6 · 21-01-2005, 10:02 PM

What extractors are you going to get?

MickyB · 22-01-2005, 01:53 AM

Either the JMM Race ones, or the Pacemaker comps. I can get the Pacey's for $410, so I guess I have to work out if the JMM are worth the extra $$$.

TIKFD6 · 22-01-2005, 08:31 PM

The un-coated JMM Race series headers are only $470.
In my opinion they are worth every cent.
I hade JMM Scavangers, then ypgraded to JMM Race series when i put in the cam.

MickyB · 23-01-2005, 01:29 PM

Quote:

Originally Posted by TIKFD6

The un-coated JMM Race series headers are only $470.
In my opinion they are worth every cent.
I hade JMM Scavangers, then ypgraded to JMM Race series when i put in the cam.

Is that $470 fitted? If not, are they very difficult to fit? ie moving the cat convertor?
Anyone run one of these cams in an engine without extractors?

TIKFD6 · 23-01-2005, 10:04 PM

I installed mine myself, and my mate at the exaust shop just did the welding of the cat into the new position.
So id say about $100 to fit.