|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
11-06-2013, 02:42 AM
|
#1 | ||
|
Starter Motor
Join Date: Jun 2013
Posts: 5
|
I have a KE laser 1.6 carb. I have replaced coil & distributor & still have no spark at plugs. I am completely lost, can anybody help please.
Thank you for any response. |
||
|
|
|
14-06-2013, 02:26 AM
|
#3 | ||
|
Starter Motor
Join Date: Jun 2013
Posts: 5
|
It is not the std round coil, it is module type coil, I cleaned body where coil mounts and I have replaced engine control module on fire wall, still no spark, dist came off a running vehicle.
|
||
|
|
|
|
14-06-2013, 10:08 AM
|
#5 | ||
|
Regular Member
Join Date: Jul 2011
Posts: 81
|
From memory, there is a black module inside the distributor called an ignitor....about the size of a matchbox, that can pack up. Easy to replace, needs to have thermal paste under it though. If this packs up, no spark.
Something like this: http://www.ebay.com.au/itm/IGNITION-...-/121066909830
__________________
LV MKII Focus XR5 - no mods yet! |
||
|
|
|
| This user likes this post: |
|
14-06-2013, 11:11 AM
|
#6 | ||
|
Starter Motor
Join Date: Jun 2013
Posts: 5
|
I have tried all the swap with old & new, I have put both units on a friends laser & they work ok.
|
||
|
|
|
|
14-06-2013, 11:13 AM
|
#7 | ||
|
Starter Motor
Join Date: Jun 2013
Posts: 5
|
I have tried all the swap with old & new, I have put both units on a friends laser & they work ok
|
||
|
|
|
|
15-06-2013, 12:29 PM
|
#8 | ||
|
FF.Com.Au Hardcore
Join Date: Sep 2005
Posts: 1,360
|
Geez that's weird. Might be time to get a auto elec to look at it ???
Maybe also check all your fuses & relays - to make sure one hasn't blown. Engine is cranking over - just no spark ???? |
||
|
|
|
| This user likes this post: |
|
15-06-2013, 12:40 PM
|
#9 | ||
|
Starter Motor
Join Date: Jun 2013
Posts: 5
|
Thanks Peter, I think it is time to send to wreckers not worth spending more money, its had a good life.
|
||
|
|
|
KE laser no start
Linear Mode
