|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
14-06-2019, 09:45 PM
|
#1 | ||
|
Fordluva
Join Date: Dec 2010
Posts: 105
|
The Windsor is chewing the fuel again
Replaced the 02s 2000ks ago when it had the same problem That seemed to 95% cure it Now a couple of years later its back to running rich and hunting at idle again As soon as it switches to closed loop the fuel trim heads skyward, in open on a cold start they start at 18% then fall to 3% till the ecu switches to closed. The first vid shows how the trims react on a warm start up ,on cold start they drop to 3% Can someone who knows this system have a look at the two YouTube vids and give me an opinion, Thanks Bret. https://youtu.be/32EKs5Tnen0 https://youtu.be/JaYz8f5UuNQ Also disregard the Forscan vids on YouTube, that was from last time (4yrs ago) Last edited by Caprobbo; 14-06-2019 at 09:55 PM. Reason: add more info |
||
|
|
|
15-06-2019, 03:37 AM
|
#2 | ||
|
T3 TE50 Blueprint
Join Date: Apr 2005
Posts: 934
|
Your second video shows one of the O2 sensors switching even when the engine is off. It should go full lean at key off. What brand of sensor are used in the videos.
|
||
|
|
|
AU2 XR8 EFI Problems
Linear Mode
