|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
09-06-2011, 03:36 PM
|
#1 | ||
|
Starter Motor
Join Date: Dec 2008
Posts: 20
|
Dear members,
Another nasty situation that appeared recently (cold/wet weather) has been the ongoing purchase and insertion of 15A fuses for the wipers - they just keep on blowing out when I use the wipers lever (any position)! Inspected wiring around the wipers mechanism, no shorting or presence of water/moisture. How can I resolve this nightmare, as without their use, it's dangerous driving the car on a rainy day.... Thanks again, Flokos |
||
|
|
|
02-07-2011, 07:54 AM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Dec 2007
Posts: 796
|
Your wiper motor should have a wire that goes to earth, check that for good clean contact and check inside the plug on the wiper motor for clean bright contacts. If all is good, it's time for a new wiper motor.
|
||
|
|
|
|
07-07-2011, 08:12 PM
|
#3 | ||
|
Starter Motor
Join Date: Dec 2008
Posts: 20
|
Many thanks Graham7773.
|
||
|
|
|
Telstar 1985 AR - Wipers Fuse failure
Linear Mode
