Raging Rhino XYGT @ WSID! - Page 4

protd · 27-12-2011, 09:06 PM

Quote:

Originally Posted by XT302

To be honest I don't recall, was run up mainly to check fuel mixtures, luckily now a easier method is engaged for this.

XF auto? STOUT mph.

yea it's a auto mate, engine made 585 or 595 can't quite remember on pavteks dyno about 5 years ago, i just finished giving it a freshen up..

protd · 27-12-2011, 09:09 PM

Quote:

Originally Posted by XT302

I am looking forward to some updates on the XR, ps either AVIS (as you suggested) or straight white tinter gets my vote.

yea i'm leaning towards avis white, simply because it's correct for that model car i know 's not stock, but apart from wheels i wanna give it a almost stock apperance, even going the good old blind in the rear window..

XT302 · 27-12-2011, 09:15 PM

The full sleeper stock look is nice, I can't wait....Polar white is nice too if you go the "A" mix - cleaner/brighter.

protd · 27-12-2011, 09:18 PM

I'll keep that in mind when i'm painting some sample's thanks..

XT302 · 27-12-2011, 09:19 PM

My father's is "A"

http://www.fordforums.com.au/showthread.php?t=11336548

protd · 27-12-2011, 09:35 PM

yes i remember when you posted the pics in my topic, i like that as well, now i'm back to polar or avis to decide on..

XT302 · 27-12-2011, 10:02 PM

Lol , I am sure either way you cannot go wrong

HP-0351 · 27-12-2011, 11:35 PM

Yeah couldn't remember the exact ET but I knew I'd be close! Lol

I never said the AC was connected, just that it is an AC car. But the PS was connected at the time from memory but your pic will sort that.

Yes not its first time racing, but it was in that trim when it ran the ten I believe.

Was a tough genuine GT all the same : )

Windsor · 28-12-2011, 09:28 AM

Quote:

Originally Posted by HP-0351

Yeah couldn't remember the exact ET but I knew I'd be close! Lol

I never said the AC was connected, just that it is an AC car. But the PS was connected at the time from memory but your pic will sort that.

Yes not its first time racing, but it was in that trim when it ran the ten I believe.

Was a tough genuine GT all the same : )

G'day Gents. By in that trim do you mean dropped pipes, race fuel, drag suspension, jerico box, 4.88's,7k launches etc.? It is a very cool car but there is a big difference between racing a car as you drive it & changing everything around to run a number. I believe the XYGT this thread is about is raced as it's driven

Cheers
Steve B

P.S. Garrett we are putting the green one together today

HP-0351 · 28-12-2011, 10:02 AM

I bet Ante only revs it like he drives it on the street when hes racing it on the track LOL

The boys prepped it to run a good number as it doesn't have a cage and wouldn't get a chance to have another crack at it. Simple as that.

HP-0351 · 28-12-2011, 12:02 PM

By the way the XB ran the ten on pump fuel not race fuel. Not that I expect you to believe it...

Besides the exhaust and slicks it could be driven on the street drag suspension and all.

Does Ante drive his car as raced on the street? It seems that is what you are saying...slicks and all LOL

RPM351 · 28-12-2011, 02:24 PM

Quote:

Originally Posted by XT302

NOW it is MOSTLY same parts?....there are some photos that indicate PLENTY of different parts were needed due to the catastrophic grenading of the OP built engine

As for 500 odd horsepower engine dyno says your odd is a BIG number, also now there is a difference in RWHP...

3.25 to 3.9 was a difference, some agree different gearboxes use up different amounts of power there was a difference in gearbox change, so for those two changes and the practice there was a ET and MPH difference.

So what is the theory of the multiple increases in MPH?

There would be some that would agree increase in MPH is generally a indicator of a increase in HP?

Garret, seems You Have an extra-ordinary interest in What went "wrong" With the First engine I built and If That is the case Why?<snip>there is always 3 sides to any story! <snip>

XT302 · 28-12-2011, 05:04 PM

Steve generally 3 sides to every story, but even you would agree the engine you built had a catastrophic end that required most of the parts to be binned?

<snip>

**PepeLePew** · 28-12-2011, 05:18 PM

Keep it clean please. Debate is debate and opinions are opinions but keep it NOT personal.

XT302 · 28-12-2011, 08:14 PM

Quote:

Originally Posted by RPM351

Garret, seems You Have an extra-ordinary interest in What went "wrong" With the First engine I built and If That is the case Why?<snip>there is always 3 sides to any story! <snip>

Steve,

Don't flatter yourself, stated a fact engine let go (maybe read what lead to that post

)...Give me your side then, or shouldn't I hold my breath?

Garrett

RPM351 · 28-12-2011, 11:06 PM

Quote:

Originally Posted by XT302

Steve,

Don't flatter yourself, stated a fact engine let go (maybe read what lead to that post

)...Give me your side then, or shouldn't I hold my breath?

Garrett

Garret, I never "flatter" myself,If You would like to hear my side of the story Your more than welcome to come past my workshop one day and Have a friendly chat!

XT302 · 29-12-2011, 07:16 AM

Steve,

Your shop is out of my way, and I am not that inclined to know, you seem to think I have been provided the wrong side of the story, just thought you wanted to right that ....I am sure we will run into each other somewhere, as you say have a friendly chat, you may even want to share your side ....

GARRETT

noukid · 13-01-2012, 07:32 PM

anyone got any more detailed info on the new motor? i am looking at building something similar to run mid-high 11s in an xw.

heads - afd 2v, any porting??
cam - specs, or brand/type if specs are secret
intake - air gap
carb?
bottom end - 393
diff gears
transmission/shifter

XT302 · 13-01-2012, 09:54 PM

heads - afd 2v, any porting??NO AND NO
cam - specs, or brand/type if specs are secret YEP ARNT THEY ALL
intake - air gap YES
carb?
bottom end - 393 YES
diff gears 3.89s
transmission/shifter OWNER MADE/MODDED MANUAL

noukid, we missed you at our last drag day, if you were there I would have introduced you and you could have asked your questions in person.

racing again friday night if you want to wander over...

noukid · 14-01-2012, 02:17 PM

hey garrett, yea i missed the last drag day. unfortunately had a few things on and the car isnt 100% ready to go yet.

ill try make it out next friday night

XT302 · 19-01-2012, 06:07 PM

Ok sweet

CHASA · 21-01-2012, 01:19 AM

Quote:

Originally Posted by XT302

heads - afd 2v, any porting??NO AND NO
cam - specs, or brand/type if specs are secret YEP ARNT THEY ALL
intake - air gap YES
carb?
bottom end - 393 YES
diff gears 3.89s
transmission/shifter OWNER MADE/MODDED MANUAL

noukid, we missed you at our last drag day, if you were there I would have introduced you and you could have asked your questions in person.

racing again friday night if you want to wander over...

Dont you just love those secret cam specs stories . Blokes would rather give you their pin number for their credit card but not the cam specs.

XT302 · 21-01-2012, 12:04 PM

Chasa are you kinetic cams?

CHASA · 21-01-2012, 09:03 PM

Quote:

Originally Posted by XT302

Chasa are you kinetic cams?

Yes I am Dennis Kinetic cams.

XT302 · 22-01-2012, 03:27 PM

Quote:

Originally Posted by CHASA

Yes I am Dennis Kinetic cams.

Ok sweet you done the cam in my mate Zak's XWGT

XT302 · 23-01-2012, 08:22 PM

A bit of Friday night fun

http://www.youtube.com/watch?v=N7JP3..._order&list=UL

XT302 · 03-02-2012, 04:23 PM

Anyone interested there is a few photos of this "replica" lol in latest Street Fords from a recent private track day, same day featured in Australian Mustang and Ford

http://www.ausmustangandford.com.au/index.html

HP-0351 · 03-02-2012, 04:28 PM

http://www.streetfords.com.au/magazine.php

http://enews.emgroup.com.au/sf/2012/0202/

HEMI POWER · 03-02-2012, 06:09 PM

Quote:

Originally Posted by XT302

Anyone interested there is a few photos of this "replica" lol in latest Street Fords from a recent private track day, same day featured in Australian Mustang and Ford

http://www.ausmustangandford.com.au/index.html

Looking forward to the write up.

XT302 · 03-06-2012, 11:53 AM

New Pb

10.642@129.44

http://www.cacklingpipesphotography....230512_061.JPG