Bluekoops Coupe

BlueKoop · 29-08-2006, 12:55 AM

Thought i might share what ive been doing for the past few weeks.

Ok now shes
30 thou over
10.5-1
Hypetc Pistons
Moroso Oil ristictor kit
High Volume Oil pump
Rollmaster Chain
Crane F238 Cam, lifters, springs
4v heads
Yella Terra Rockers
Covara Race Stainless Valves
Romac balancer
351 Crank
Shot peened, close and honed rods, with Arp studs
750DP mighty demon
Holley Strip Dominator Manifold
Standard XD spec elec dizzy

Cant wait till shes in.

superbird302 · 29-08-2006, 07:20 AM

looking awesome mate...will be all ready for summer.

brenx · 29-08-2006, 09:49 AM

Very nice. Should go very well too. What's the rest of the driveline? A mate has the same spec engine with a 3500rpm convertor and 4.11's. I find his car is very enjoyable to drive.

Tony xa · 29-08-2006, 09:50 AM

Looks real nice

BlueKoop · 29-08-2006, 10:56 AM

The rest of the driveline is a rebuilt C4 with a stage 2 kit, and a 3000Rpm Converter, and a nine inch is soon to be on the way with 3.9's and LSD.

muppet · 29-08-2006, 11:18 AM

My last combo was pretty much the same as that and it was a great thing to drive. It was my daily driver for 4 years and never missed a beat. I only had a 2500 stall but it had 3.5 diff gears and with all the talk about 4v's being sluggish down low it was still pretty quick off the line.

brenx · 29-08-2006, 01:58 PM

Quote:

Originally Posted by BlueKoop

The rest of the driveline is a rebuilt C4 with a stage 2 kit, and a 3000Rpm Converter, and a nine inch is soon to be on the way with 3.9's and LSD.

Should go very well ;)

montyv8 · 29-08-2006, 02:55 PM

looking good. nice manifold ;)

BlueKoop · 29-08-2006, 03:03 PM

Quote:

Originally Posted by montyv8

looking good. nice manifold ;)

Thanks mate.... must be good to fianaly see it go to good use. Cleaned up pretty well as well.

BlueKoop · 29-08-2006, 03:15 PM

Quote:

Originally Posted by superbird302

looking awesome mate...will be all ready for summer.

Should be mate..... will yours? we will have to go for another run once were both back on the road.

superbird302 · 29-08-2006, 03:36 PM

Should be soon. The CHI's are going on next week. Definitely go for a run soon

BlueKoop · 08-10-2006, 09:05 PM

Update ... with a couple pics

XCSEDAN · 08-10-2006, 09:56 PM

looks sweet as mate, let us know what power u make
cheers
Dan

**Falcon Coupe** · 08-10-2006, 10:27 PM

Looks great, i hope it does you proud.
Did you consider port plates ?

BlueKoop · 08-10-2006, 10:30 PM

Quote:

Originally Posted by Falcon Coupe

Looks great, i hope it does you proud.
Did you consider port plates ?

i did consider them... were just going to get her up and running and see how she goes. If it is a bit "boggy" down low i will fit them.

montyv8 · 08-10-2006, 11:23 PM

looks fantastic

looking forward to seeing pics of it in the coupe

TomXY · 09-10-2006, 12:46 AM

That will look very impressive when its in the XB, lots of chrome!!
Looks really good, nice work..

Donny · 09-10-2006, 05:11 PM

That engine combo will be good for around the 450 HP area, and be a dream to drive. I know of several people with this engine/cam combo with both 2v and 4v heads, and they range around 447 HP to 465 HP from memory. This combo is an excellant drivers combo, specially with 4 speed and 3.5 diff, and I will be also interested to see how it performs, as this is what I will upgrade mine too also.

Tony xa · 09-10-2006, 07:28 PM

Very nice Black and chrome/polish work so well together .

**gregaust** · 09-10-2006, 08:34 PM

Looking real good.Bet you can't wait to put it in.Just one thing on the alternator bracket.The adjuster bracket should go under the support bracket....

BlueKoop · 09-10-2006, 08:53 PM

lol i will have to fix that bracket... if i get 400-450 hp i will be cheering.

Donny · 10-10-2006, 12:04 AM

You will be. Are your heads big port 4v? or small port 2v? If they are big ports, let me know how she goes, as I said thats the exact combo mine will be when I freshen it up some, and the Port Stuffers are what I am tossing up on doing at the moment, as a few people swear by them, and some say they are not worth the cost to fit...

BlueKoop · 10-10-2006, 12:09 AM

Yeah they are 4v's ... look at the first pics you can tell. ... Sounds like im going to be a good guinea pig for ya.

Donny · 10-10-2006, 12:15 PM

Ahh yes, afta re looking the pics over, I saw the 4.
Will be very interesting to see how it all works now.
A few people have said not to waste time with the port plates, but get the proper stuffers instead, so will be interesting to see how it all pans out without them in yours.
When do you think you will have the engine and car mobile again?

Mighty_Liam · 10-10-2006, 01:14 PM

Looks mad. Love the way it all comes together nice and clean and tidy. Those ports are huge, the valves looked pretty big too, what size are they?

Excuse the ignorance, but what are these port plates or port stuffers you are talking about?

Cheers,

**Falcon Coupe** · 10-10-2006, 07:37 PM

Quote:

Originally Posted by Mighty_Liam

Looks mad. Love the way it all comes together nice and clean and tidy. Those ports are huge, the valves looked pretty big too, what size are they?

Excuse the ignorance, but what are these port plates or port stuffers you are talking about?

Cheers,

You can get screw in tongues or the cheaper version port plates, basically they make the port smaller which increases wind speed, it makes it a more efficient flow to the chambers, it helps the bottom end lag in 4v's and increases torque with a small power gain, see here:

http://www.fordforums.com.au/showpos...&postcount=116

http://www.fordforums.com.au/showpos...&postcount=115

Donny · 10-10-2006, 09:06 PM

They tell me the screw in type are much betterer....

xbcoupe302 · 12-10-2006, 04:57 PM

looks good i run the same motor except 2v heads i dont think your mechanical pump will keep up with it thou i had to change to a electric fuel pump to supply enuff fuel.

Mighty_Liam · 12-10-2006, 07:44 PM

Quote:

Originally Posted by Falcon Coupe

You can get screw in tongues or the cheaper version port plates, basically they make the port smaller which increases wind speed, it makes it a more efficient flow to the chambers, it helps the bottom end lag in 4v's and increases torque with a small power gain, see here:

http://www.fordforums.com.au/showpos...&postcount=116

http://www.fordforums.com.au/showpos...&postcount=115

So you buy the bigger port 4V and then add tongues to reduce the size? I don't know anything about the differences between 4V and 2V heads, but why not just use 2V heads and install bigger valves and stuff. What other things besides port and valve size does the 4V have over the 2V?

Cheers,

brenx · 12-10-2006, 07:56 PM

Quote:

Originally Posted by Mighty_Liam

So you buy the bigger port 4V and then add tongues to reduce the size? I don't know anything about the differences between 4V and 2V heads, but why not just use 2V heads and install bigger valves and stuff. What other things besides port and valve size does the 4V have over the 2V?

Cheers,

2V's need a lot of $ to get the same potential as a stock set of 4V's with tongues.