Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Ford Car Clubs > Perth Falcons

Reply
 
Thread Tools Display Modes
Old 03-01-2008, 04:10 PM   #1
AUFairmont
HSV, I just ate one
 
Join Date: Jun 2005
Location: Perth (Seville Grove)
Posts: 474
Default Paint N Panel help required.....

Does anyone know of a place that can Mod my AUII Fairmont Bonnet
I want the B series V8 buldge with the EF/EL Cat scratch bonnet vent on the side, with a nice Falcon Air brushed over my bonnet

AUFairmont is offline   Reply With Quote Multi-Quote with this Post
Old 03-01-2008, 04:14 PM   #2
Kryton
 
Kryton's Avatar
 
Join Date: Dec 2004
Posts: 9,316
Default

any panel beater could do that.
do you have picture of what you want so you know what itll look like?
Kryton is offline   Reply With Quote Multi-Quote with this Post
Old 03-01-2008, 05:54 PM   #3
AUFairmont
HSV, I just ate one
 
Join Date: Jun 2005
Location: Perth (Seville Grove)
Posts: 474
Default

No its just in my head im no good at drawing or at photoshop lol ! im a pathetic artist, stick men with boobs are my limit actually then it would be stick woman :P
AUFairmont is offline   Reply With Quote Multi-Quote with this Post
Old 04-01-2008, 06:08 PM   #4
Tony xa
Streetrides panel & paint
 
Tony xa's Avatar
 
Join Date: Jul 2005
Location: Perth
Posts: 2,657
Technical Contributor: For members who share their technical expertise. - Issue reason: Tonys qualified advice on paint and panel is always very good 
Default

Try Ryan at custom mods in malaga .He is a painter but a very good one with those mods you want as well he will be able to help out with who could do this .
I would try and get a au bonnet with a buldge already done from somewhere like this .
Cost wise it would be close to the same and you don't have to worry about people stuffing your bonnet up (from experience ).
http://www.awcinfo.com/secureshop/ca...php?cat_id=283
Tony xa is offline   Reply With Quote Multi-Quote with this Post
Old 15-02-2008, 02:05 PM   #5
ringo636
Regular Member
 
ringo636's Avatar
 
Join Date: Oct 2007
Location: Perth WA
Posts: 31
Default

I know a painter that has an AU bonnet already made up with the bulge in it and he will match your colour for you, not sure if he does airbrushing but he may be able to point you in the right direction.
TSM Panel & Paint, CanningVale/ Jandakot Trent - 0401 456 589

Tell him Ringo sent ya and he'll look after you.
ringo636 is offline   Reply With Quote Multi-Quote with this Post
Old 27-02-2008, 06:19 PM   #6
BA RTV V8
Regular Member
 
BA RTV V8's Avatar
 
Join Date: Sep 2006
Posts: 272
Default

I have 2 au bonnets with boss buldge (fiberglass) at $975 each unpainted
Also have a few aggressor bonnets on special.
Give us a ring at The Uteshed 92506658
Millsy
BA RTV V8 is offline   Reply With Quote Multi-Quote with this Post
Old 05-03-2008, 09:54 PM   #7
boxy351
Regular Member
 
boxy351's Avatar
 
Join Date: Mar 2005
Location: Perth West Oz
Posts: 143
Default

Tony be doing well to get Ryan as he mainly does bike tanks these days!!
but if a small job ya might be lucky!!





Quote:
Originally Posted by Tony xa
Try Ryan at custom mods in malaga .He is a painter but a very good one with those mods you want as well he will be able to help out with who could do this .
I would try and get a au bonnet with a buldge already done from somewhere like this .
Cost wise it would be close to the same and you don't have to worry about people stuffing your bonnet up (from experience ).
http://www.awcinfo.com/secureshop/ca...php?cat_id=283
boxy351 is offline   Reply With Quote Multi-Quote with this Post
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 07:56 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL