|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
29-04-2017, 05:16 PM
|
#1 | ||
|
Starter Motor
Join Date: Feb 2017
Posts: 11
|
So was driving home and in the last 200 meters of my trip I start hearing odd noises, then it sounded like I drove over a branch and had some grinding.
Got home and popped the bonnet Looks like one of the pulleys or something has shifted and the belt is shredding against it If this an easy fix , does anyone know what that disk is, is it s tensioner or the water pump? (Yeah, I know that little about cars) Any advice appreciated.  Sent from my iPhone using Tapatalk |
||
|
|
|
29-04-2017, 06:55 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: Jul 2008
Location: Melbourne
Posts: 804
|
it looks like an idler pully but cannot be sure. they are relatively easy to replace but need smallish hands in the engine bay. the bearing must have failed badly for ti to move that way They usually make a noise for a long time before failing so bad
|
||
|
|
|
|
29-04-2017, 07:39 PM
|
#3 | |||
|
Starter Motor
Join Date: Feb 2017
Posts: 11
|
Quote:
I haven't heard any squealing noises, but the disc was eaten away by the belt so not so thing I can just pop on. Was hoping for a quick fix but it's a wee bit more than that. Sent from my iPhone using Tapatalk |
|||
|
|
|
|
29-04-2017, 07:59 PM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: Jan 2009
Location: Victoria
Posts: 877
|
That pulley at the very top is your alternator pulley and beneath it should be an idler pulley
Last edited by DZFord; 29-04-2017 at 08:04 PM. |
||
|
|
|
|
29-04-2017, 08:04 PM
|
#5 | |||
|
Starter Motor
Join Date: Feb 2017
Posts: 11
|
Quote:
So the alternator is ok but the tensioner under it is cactus so need a new one of those along with a belt. Yay  Sent from my iPhone using Tapatalk |
|||
|
|
|
|
29-04-2017, 08:57 PM
|
#6 | ||
|
FF.Com.Au Hardcore
Join Date: Jan 2009
Location: Victoria
Posts: 877
|
Any other pics / angles?
|
||
|
|
|
|
29-04-2017, 09:00 PM
|
#7 | |||
|
Starter Motor
Join Date: Feb 2017
Posts: 11
|
Quote:
I went back down when more knowledgeable friend showed up, the belt has actually sawed a cut into the wheel, and like like it's rubbing on the exposed bearing. She's good and knackered. Sent from my iPhone using Tapatalk |
|||
|
|
|
|
29-04-2017, 10:40 PM
|
#8 | ||
|
FF.Com.Au Hardcore
Join Date: Jul 2005
Posts: 552
|
Best practice is to replace tensioners/pulleys with belts after a certain time.
They loose their ability to provide the correct tension. Simple enough to replace, this looks like they've never been changed out - probably only plastic and do a fair bit of work. |
||
|
|
|
|
30-04-2017, 02:02 AM
|
#9 | |||
|
Starter Motor
Join Date: Feb 2017
Posts: 11
|
Quote:
I'm not mechanically able, so I trust the mechanics I pay to service these things in accordance with manufacturer and visible wear. Working today and Mondays a public holiday so well see how Tuesday goes  Sent from my iPhone using Tapatalk |
|||
|
|
|
Belt or pulls failure help! 2009 TDCI LV Focus 6sp Auto
Linear Mode
