Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Laser and Telstar

Reply
 
Thread Tools Display Modes
Old 04-06-2016, 02:06 PM   #1
kh323
Starter Motor
 
Join Date: Jun 2016
Posts: 2
Default KH Laser gear lever bushes

Hi all,
Does anyone know where I can purchase a new set of gear lever bushes to suit a 1993 KH Laser 5 speed manual? They are mounted on the outside end of the gear lever.

Cheers, David.
kh323 is offline   Reply With Quote Multi-Quote with this Post
Old 04-06-2016, 06:12 PM   #2
GTLEGEND
FF.Com.Au Hardcore
 
Join Date: Mar 2013
Posts: 7,471
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Every advice post I visit where OP are seeking advice for their new vehicle, he is there and adds valuable support and advice for rectifying the problem. Really is a Legend. Technical Contributor: For members who share their technical expertise. - Issue reason: The quality of information he provides is in depth and highly valued by those posting questions. 
Default Re: KH Laser gear lever bushes

Hi David,

If you are talking about the ones at the bottom of the lever, they are also the same as the ones on the linkage that is at the other end of the lever as well. Part number B001 46062 99 still available from Ford.

There is also another bush that runs at the end of the other linkage that runs from the square part around the gear lever, it has a part number of GJ21 46041 and is still available from Ford also.
GTLEGEND is offline   Reply With Quote Multi-Quote with this Post
Old 04-06-2016, 08:26 PM   #3
kh323
Starter Motor
 
Join Date: Jun 2016
Posts: 2
Default Re: KH Laser gear lever bushes

Thanks for your help GTLEGEND.
I honestly didn't think you could still get these parts from Ford anymore.

Cheers.
kh323 is offline   Reply With Quote Multi-Quote with this Post
Old 08-06-2016, 07:18 PM   #4
zhodak
Shakern, not stirred
 
zhodak's Avatar
 
Join Date: Mar 2005
Location: Canberra
Posts: 710
Default Re: KH Laser gear lever bushes

These should also fit. Capri and Laser essentially the same motor and gearbox. We used a Laser service manual to figure out how to replace the bushes.

http://www.ebay.com.au/itm/FORD-CAPR...gAAOSwJQdXBN4G
zhodak is offline   Reply With Quote Multi-Quote with this Post
Old 08-06-2016, 07:41 PM   #5
GTLEGEND
FF.Com.Au Hardcore
 
Join Date: Mar 2013
Posts: 7,471
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Every advice post I visit where OP are seeking advice for their new vehicle, he is there and adds valuable support and advice for rectifying the problem. Really is a Legend. Technical Contributor: For members who share their technical expertise. - Issue reason: The quality of information he provides is in depth and highly valued by those posting questions. 
Default Re: KH Laser gear lever bushes

Quote:
Originally Posted by zhodak View Post
These should also fit. Capri and Laser essentially the same motor and gearbox. We used a Laser service manual to figure out how to replace the bushes.

http://www.ebay.com.au/itm/FORD-CAPR...gAAOSwJQdXBN4G
Close..

The small blue bushes in the picture are the same as the KF/H laser, B001 46062 99 (what KH323 needs), but the bigger rubber bush in the top middle of the picture for Capri is the same as the earlier KC/E Laser, not the KF/H style. The Capri/KC/E rubber has part number B092 46041 where the KF/H has GJ21 46041.

Not sure about the other parts in the kit..
GTLEGEND is offline   Reply With Quote Multi-Quote with this Post
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 02:53 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL