|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
22-07-2008, 11:32 PM
|
#1 | ||
|
Shifter
Join Date: Jan 2007
Location: Adelaide
Posts: 18
|
How many people out there have lowered their Fiesta's?
Which springs were used and how much did it lower it? I've been told about 35mm is the max. you can lower them... Been quoted $450 supplied and fitted with King Springs...not bad? Cheers. Last edited by gt_mark2; 22-07-2008 at 11:32 PM. Reason: Error |
||
|
|
|
23-07-2008, 11:11 AM
|
#2 | ||
|
no sacrifice, no victory
Join Date: Oct 2006
Location: Narre Warren
Posts: 119
|
I got Eibach's from european-parts.net for around $220. Postage can be a bit a pain so I guess you need to order a few more things to justify the cost. It took a while to install them afterwards because I was too lazy to get round to doing it but I installed the rear pair with dad and got the front ones put in at the local auto mechanic for $110. Lowers around 35mm.
__________________
2006 Panther Black Fiesta LX Eibach Lowering Springs, Wiecher Sports Strut Brace, K&N panel filter, fog lights, crystal black side indicators, car mats, tinted windows
|
||
|
|
|
|
23-07-2008, 11:22 AM
|
#3 | ||
|
FF.Com.Au Hardcore
Join Date: May 2007
Posts: 1,978
|
thats sounds an alright price without mucking around with overseas parts and shipping. I have kingsprings under my Mitsubishi Mirage and they have been great. I've had it for about 5 years now and no problems except for having to roll the guards, but I think Fiestas are so flared I don't think you will have that issue.
__________________
2021 Fiesta ST find me on instagram @adm.history for daily automotive historical Australian advertisements. |
||
|
|
|
|
23-07-2008, 01:43 PM
|
#4 | ||
|
FF.Com.Au Hardcore
Join Date: May 2006
Location: Brisbane
Posts: 1,053
|
If you've got an LX, Zetec or Ghia model then the Kings are fine but they are not suitable for the XR4 as the 2 litre motor is heavier, if you have an XR4 the best bet would be the Eibach Springs from Euro Parts.
|
||
|
|
|
|
23-07-2008, 02:43 PM
|
#5 | |||
|
FF.Com.Au Hardcore
Join Date: May 2006
Location: Sydney, NSW
Posts: 2,368
|
It's pretty simple, put it this way.
Eibach Pro-Kit Springs (AU$280 incl. shipping) + install (AU$150) = $430 King Springs + install = $450 (based on your quote) Eibach > King Springs. I'd get the better product for a bit less, thank you. EDIT :- $280 incl shipping is a few yrs ago. Now that the dollar is strong, it'd be a bit less. So... I'd get the better product for a bit less, thank you. http://www.european-parts.net/catalo...roducts_id=472 Quote:
|
|||
|
|
|
|
23-07-2008, 05:20 PM
|
#6 | ||
|
Regular Member
Join Date: Nov 2007
Location: Liverpool, NSW
Posts: 278
|
I dont kno about the eibachs, but i fitted king springs to my fiesta, and havent had any issues with them. They look great and the ride is awesome. Just my opinion.
__________________
2006 WQ Fiesta Zetec Sea Grey Interior:- MOMO Blue Leather Gear Knob, Window tint, Scuff Plates, ST Black & Blue Leather seats, Soundstream Amp & 5x7 speakers, Sony Headunit, Pioneer sub & Amp. Under the Hood:- Superchips ECU Flash Tune, Denso Iridium plugs, KV85 Magnecor Leads, BMC CDA Induction. Exterior:- Spoiler, clear side repeaters, Lowered (35mm) King Springs, Whiteline 22mm Rear sway bar, 2" cat back exhaust with a dual conversion, Konig 17" Hotswap with Kumho Rubber, HID's. |
||
|
|
|
|
23-07-2008, 05:55 PM
|
#7 | ||
|
AFF Post NAZI
Join Date: Mar 2006
Location: Albury
Posts: 3,634
|
__________________
"Its not always about power, The car has to handle Beautifully" |
||
|
|
|
|
23-07-2008, 05:59 PM
|
#8 | ||
|
AFF Post NAZI
Join Date: Mar 2006
Location: Albury
Posts: 3,634
|
Eibachs =
 King springs = 
__________________
"Its not always about power, The car has to handle Beautifully" |
||
|
|
|
|
23-07-2008, 08:16 PM
|
#9 | |||
|
FF.Com.Au Hardcore
Join Date: May 2006
Location: Brisbane
Posts: 1,053
|
Quote:
The springs designed for the ST/XR4 will "of course" support the lighter 1.6 motor but remember Eibach also make lowered springs specifically designed for the 1.6 models as well. Eibach =  Kings = 
|
|||
|
|
|
|
23-07-2008, 09:03 PM
|
#10 | ||
|
Shifter
Join Date: Jan 2007
Location: Adelaide
Posts: 18
|
cool thanks for the info guys, and the pics! the quote i got of $450 was from profix and includes the springs and fitting, with either king springs or pedders. (Pedders quoted $690 fitted!)
Profix also quoted me $240 for a cat back 2" sports exhaust fitted so i'm going to get that done at the same time, that'll make the festy a bit more fiery... |
||
|
|
|
|
25-07-2008, 01:01 PM
|
#11 | ||
|
Regular Member
Join Date: Nov 2007
Location: Liverpool, NSW
Posts: 278
|
Photn im not sure if king springs caused that or poor driving. LOL
__________________
2006 WQ Fiesta Zetec Sea Grey Interior:- MOMO Blue Leather Gear Knob, Window tint, Scuff Plates, ST Black & Blue Leather seats, Soundstream Amp & 5x7 speakers, Sony Headunit, Pioneer sub & Amp. Under the Hood:- Superchips ECU Flash Tune, Denso Iridium plugs, KV85 Magnecor Leads, BMC CDA Induction. Exterior:- Spoiler, clear side repeaters, Lowered (35mm) King Springs, Whiteline 22mm Rear sway bar, 2" cat back exhaust with a dual conversion, Konig 17" Hotswap with Kumho Rubber, HID's. |
||
|
|
|
|
25-07-2008, 01:30 PM
|
#12 | |||
|
AFF Post NAZI
Join Date: Mar 2006
Location: Albury
Posts: 3,634
|
Quote:
__________________
"Its not always about power, The car has to handle Beautifully" |
|||
|
|
|
|
25-07-2008, 02:05 PM
|
#13 | ||
|
supercarclub.com.au
Join Date: Apr 2008
Location: Sydney, NSW
Posts: 113
|
--deleted--
|
||
|
|
|
|
25-07-2008, 02:07 PM
|
#14 | |||
|
FF.Com.Au Hardcore
Join Date: May 2006
Location: Sydney, NSW
Posts: 2,368
|
Quote:
|
|||
|
|
|
|
25-07-2008, 02:28 PM
|
#15 | ||
|
Regular Member
Join Date: Nov 2007
Location: Liverpool, NSW
Posts: 278
|
Photn i was only joking with ya mate. Not being a mechanic myself, i dont really kno which are better quality.
__________________
2006 WQ Fiesta Zetec Sea Grey Interior:- MOMO Blue Leather Gear Knob, Window tint, Scuff Plates, ST Black & Blue Leather seats, Soundstream Amp & 5x7 speakers, Sony Headunit, Pioneer sub & Amp. Under the Hood:- Superchips ECU Flash Tune, Denso Iridium plugs, KV85 Magnecor Leads, BMC CDA Induction. Exterior:- Spoiler, clear side repeaters, Lowered (35mm) King Springs, Whiteline 22mm Rear sway bar, 2" cat back exhaust with a dual conversion, Konig 17" Hotswap with Kumho Rubber, HID's. |
||
|
|
|
|
05-08-2008, 09:45 PM
|
#16 | ||
|
Starter Motor
Join Date: Aug 2008
Location: Brisbane
Posts: 9
|
Howdy boys and girls....i don't know alot about car suspension, but, just wondered about the lowering. If you jacked the car up, do the springs slip out? I had a different make car and lowered it and when i jacked it up to change a tyre etc, the springs would come out because they were shorter.....if you know what i mean. Does this happen to the fiesta
Cheers. Dave. |
||
|
|
|
|
05-08-2008, 10:22 PM
|
#17 | ||
|
Get in the van!
Join Date: Feb 2006
Location: Adelaide, SA
Posts: 1,110
|
Springs falling out sounds like cut springs to me...
__________________
The Dad Bus (TM): 2004 BA XT Wagon, soon to be set up as a camper and tourer. |
||
|
|
|
|
05-08-2008, 10:27 PM
|
#18 | |||
|
AFF Post NAZI
Join Date: Mar 2006
Location: Albury
Posts: 3,634
|
Quote:
__________________
"Its not always about power, The car has to handle Beautifully" |
|||
|
|
|
|
05-08-2008, 10:33 PM
|
#19 | ||
|
Starter Motor
Join Date: Aug 2008
Location: Brisbane
Posts: 9
|
Thanks for the reply photn. I will look at getting it done now when that time comes.
Cheers. Dave. |
||
|
|
|
|
06-08-2008, 09:52 AM
|
#20 | |||
|
GRRRR.....
Join Date: May 2005
Location: Brisbane
Posts: 1,158
|
Quote:
__________________
Now - 2007Renault Megane sedan, Steel Gray, 19" Koya Ambush with 235/35R19 Yokohama ADVAN V103, Eibach Pro-Kit. Gone but not forgotton - Diamond White 2004 LX Fiesta If you sneeze with your eyes open, do your eyes pop out??
|
|||
|
|
|
|
06-08-2008, 10:09 AM
|
#21 | ||
|
Starter Motor
Join Date: Aug 2008
Location: Brisbane
Posts: 9
|
Now that is scary!!.....Scareybear......it was my old VB and i had Lovells put on. Pardon the pun, but, it was a pain in the rear end so to speak but it handled well.
Cheers. Dave. |
||
|
|
|
|
06-08-2008, 07:31 PM
|
#22 | ||
|
04 fiesta zetec
Join Date: Jul 2007
Location: melbourne
Posts: 370
|
Sorry for posting in new reply, but still on lowering topic.
just looking at some Eibachs from uk ebay seller, They are used (will only buy if i get them dirt cheap). Description says they're off an 08' plated ST but they differ slightly from the Eibach pics on european-parts. will they fit my 04' zetec fine? any help would be awesome. seller pics:   euro-parts pic: 
|
||
|
|
|
|
06-08-2008, 07:37 PM
|
#23 | ||
|
Da Shifty One
Join Date: Mar 2005
Location: Sydney
Posts: 1,586
|
Hey,
Ill have a look at the ones i bought from European parts and should be able to tell you which ones he is selling, but i assume the ones in the euro pic are not for ST.
__________________
2013 Ford Fiesta ST - Frozen White - AU 0072/XXXX
- Mountune ST180 Intake Hose - Mountune Quick Shifter - J1 ST180 MAF Adapter - K&N Apollo CAI - Triple R Front Splitter - Richbrook Shorty Aerial - DMB Gel Overlays - LED Interior Bulb Upgrade - |
||
|
|
|
|
06-08-2008, 11:22 PM
|
#24 | ||
|
Fez good. Wez better.
Join Date: Jan 2006
Posts: 21
|
Get the guy in the UK to tell you what the all the writing on the springs says - that will be the best clue as to what they are. Someone here with an XR4 / ST will tell you waht theirs say to compare. As you say they certainly don't look quite right.
If I were you I'd just shop around local Eibach distributors for a good deal on supply & fit. It may cost you a bit more but it will be a simple, quick and stress-free exercise. You won't regret it. Personally I think pretty much all springs / shocks from OEMs will be biased toward a softer ride rather than sharper handling. Aftermarket springs only exist because the OEM ones don't satisfy those of us who like to drive and are prepared to fork out for a good product.
__________________
Gave my 2004 Fiesta Zetec to my mother-in-law. Drive a Westfield SEiW now: No roof. No windows. No doors. No ABS. No ASC. No EBD. No power brakes. No power steering. No cruise control. No radio. Got: 600kg, 300hp, R888s. |
||
|
|
|
|
07-08-2008, 11:37 AM
|
#25 | ||
|
04 fiesta zetec
Join Date: Jul 2007
Location: melbourne
Posts: 370
|
This is true. I'll message him and see. Might just go with euro-parts as its been tried and tested. Aussie dollar isn't too bad against euro. Plus taxman is giving me my coin back prob next week. I was thinking about going for the zetec s springs from european-parts instead of st springs. reason being perhaps they are more suited too lighter engine therefore will be less harsh of a ride maybe?... Although they could be the same??? Thanks for replies.
|
||
|
|
|
|
07-08-2008, 11:07 PM
|
#26 | ||
|
Fez good. Wez better.
Join Date: Jan 2006
Posts: 21
|
Just so you know: I paid -€199.50 EUR for Fiesta S Eibach Prokit from Europarts in February. That included the quick delivery option. Converted to AU$332 at the time.
Unless you have a pretty good tool kit and reasonable mechanical ability, I suggest you get someone else to install them. Fitting the rears is a doddle. The fronts will lead to a world of pain if realise you are in over your head or don't have the right gear half way through the job.
__________________
Gave my 2004 Fiesta Zetec to my mother-in-law. Drive a Westfield SEiW now: No roof. No windows. No doors. No ABS. No ASC. No EBD. No power brakes. No power steering. No cruise control. No radio. Got: 600kg, 300hp, R888s. |
||
|
|
|
|
07-08-2008, 11:18 PM
|
#27 | ||
|
04 fiesta zetec
Join Date: Jul 2007
Location: melbourne
Posts: 370
|
duly noted, thanks mate.
had a look now at the zetec s springs, 129 Euro (add shipping). about $209 aussie (add shipping) both on European-Parts. probs won't intall myself, get it done somewhere. i'm guessing if took me the better part of a day to install a body-kit, then springs are a bit much. cheers |
||
|
|
|
|
07-08-2008, 11:27 PM
|
#28 | ||
|
Like no other..........
Join Date: Sep 2005
Location: Over here.... Mod:FPV & XR Owners Club of Victoria
Posts: 1,016
|
G'Day,
We had Advantage suspension in Moorabbin come and speak at our meeting on Tuesday night - he said it was just under $800 suppied and fitted (Eibachs) for my XR4. He also metioned coil overs (Tien) were not far away............... didn't talk dollars Cheers,
__________________
A recent study found the average Australian walks about 900 miles a year.
Another study found Australians drink, on average, 22 gallons of alcohol a year. That means, on average, Australians get about 41 miles to the gallon. Kind of makes you proud to be an aussie. |
||
|
|
|
|
08-08-2008, 04:43 PM
|
#29 | |||
|
Regular Member
Join Date: Jun 2007
Posts: 175
|
Quote:
|
|||
|
|
|
|
08-08-2008, 05:10 PM
|
#30 | |||
|
FF.Com.Au Hardcore
Join Date: May 2006
Location: Sydney, NSW
Posts: 2,368
|
Quote:
Last edited by Ives; 08-08-2008 at 05:18 PM. |
|||
|
|
|
Lowering Fiesta's
Linear Mode
