|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
01-07-2007, 06:45 PM
|
#1 | ||
|
Starter Motor
Join Date: Mar 2007
Posts: 28
|
hi guys
tried this thread on the classic ford forum, no luck, am hoping someone here can help! there are 3 inlets/outlets on the charcoal canister on my '79 2lt van. The outlet marked 'carb' is blanked off, the one marked 'tank' looks to be connected to a line heading back to the fuel tank, however, the outlet marked 'purge' is not connected to anything but looks like it did have a line attached previously. Where does this go to? I've checked under the aircleaner and looked at the carby but can't see anywhere for a line to go to ... some of the emissions have been disconnected but not by me! cheers fjw |
||
|
|
|
02-07-2007, 10:50 PM
|
#2 | ||
|
Banned
Join Date: Dec 2004
Location: searching for cubes
Posts: 6,672
|
It goes to the air cleaner, not underneath but on the side, opposite to the snorkel side of the cleaner. On a 2.0L motor the carb outlet is supposed to be blanked off as the carby has internal venting. It is only connected on the 1.6L motor.
|
||
|
|
|
Escort 2lt charcoal canister piping?
Linear Mode
