|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
18-03-2017, 11:51 AM
|
#1 | ||
|
Regular Member
Join Date: Jun 2006
Location: Wantirna South, Melbourne
Posts: 425
|
I have an AU Fairmont with the VCT engine that has done 240000 kms and is on LPG. The car is both using and dropping oil. The amount it drops is not great but my mechanic informs me seals are leaking from several places. He has advised me to use a thicker oil and to use a "stop oil leak" additive to minimise the leaking. What type of oil would you advise and does the "stop leak" help at all? Thx.
|
||
|
|
|
18-03-2017, 08:00 PM
|
#2 | ||
|
Next upgraded Mk1 Leopard
  
Join Date: Jan 2005
Location: Sydney, in the burbs
Posts: 4,902
 
|
Ok so what are you using now?
UK
__________________
Plastic Surgery 1 AUII Monsoon Blue How 2's: Change rear view mirror, Install backfire valve, Change foam front seats, Install auto transmission cooler, Replace Trans Shift Globe, Remove front door Trim, Paint AU headlights, install door spears, Premium Rear Parcel Shelf, go here...
 |
||
|
|
|
|
19-03-2017, 01:01 PM
|
#3 | ||
|
Regular Member
Join Date: Jun 2006
Location: Wantirna South, Melbourne
Posts: 425
|
Shell Helix 15/W40
|
||
|
|
|
|
19-03-2017, 03:32 PM
|
#4 | ||
|
Flairs - Truckers Delight
Join Date: Aug 2006
Location: Brisbane Northside Likes: Opposite Lock
Posts: 5,731
|
I used 15w40 on my LPG AU in warm QLD, from 593k to 745k over 10 years.
It would both use and drop oil. The timing cover seal leaked, but it was only 1 drop per night, every night, for 10 years. And the only reason it used oil (about 300 or 400ml for about 7000kms from memory?) was because I took the car to redline at some point in every outing. Every day. Every single day. For 10 years.
__________________
Current: Silhouette Black 2007 SY Ford Territory TX RWD 7-seater "Black Banger"
2006-2016: Regency Red 2000 AUII Ford Falcon Forte Automatic Sedan Tickford LPG "Millennium Falcon" |
||
|
|
|
|
19-03-2017, 04:00 PM
|
#5 | ||
|
Au Falcon = Mr Reliable
Join Date: Sep 2009
Location: North West Slopes & Plains NSW
Posts: 4,076
|
Valvoline Maxlife in the same viscosity (imo because of the vct & kays) could be useful imo, guys on bitog rate it pretty high. Worth checking out, good luck!
cheers, Maka
__________________
Ford AU Series Magazine Scans Here - www.fordforums.com.au/photos/index.php?cat=2792 Proud owner of a optioned keeper S1 Tickford Falcon AU XR6 VCT - "it's actually a better-balanced car than the XR8, goes almost as hard and uses about two-thirds of the fuel" (Drive.com 2007) |
||
|
|
|
|
19-03-2017, 04:53 PM
|
#6 | |||
|
FF.Com.Au Hardcore
Join Date: Aug 2009
Posts: 2,211
|
Quote:
Perhaps an option could be to replace the seals? You need to find a mechanic a bit smarter than the one you are using. The suggestion of increasing engine oil viscosity to minimise leakage is ridiculous. |
|||
|
|
|
| This user likes this post: |
Engine oil advice
Linear Mode
