Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > General Topics > Non Ford Related Community Forums > Project Builds (non Car)

Project Builds (non Car) Here is an area where you can show / discuss other non car builds be they bikes, caravans, boats, BBQ's or whatever.

Reply
 
Thread Tools Display Modes
Old 06-08-2020, 04:20 PM   #1
Loonar
FF.Com.Au Hardcore
 
Loonar's Avatar
 
Join Date: Dec 2007
Location: S.E. Qld
Posts: 968
Default Woodworking tools

Howdy all, not a project as such, so going to post a pic of some old tools from my Patternmaking days.. Only a very small selection of the chisels/planes i used over the last 45 years or so. Also have many gouges, more of the long chisels, lathe chisels (all Marple brand) and Grandpa's carving chisels.

Drag a few out from time to time, de-rust, sharpen etc. Nothing like the sound of a sharp plane blade cutting a few thou. off..

Gave my folks old Silky Oak table top a going over recently, came up very nice, with the appropriate scars and nicks still in it..!!

Anyone else that dabbles in old hand tools ?

Cheers...
Loonar is offline   Reply With Quote Multi-Quote with this Post
Old 06-08-2020, 05:47 PM   #2
fnp
Regular Member
 
Join Date: Oct 2019
Posts: 193
Default Re: Woodworking tools

I've done a bit of woodworking here and there. I've got a few Stanleys of varying ages (I think a No 3, two 4's, a 4 1/2', and a 6). Also got quite a few marking gauges and things like that from antique tool sales. Tried making a few of my own planes out of chisels and scrap timber with varying results (more practice required). Haven't really done anything in ages, I should try to get back into it.
__________________
FG XR8 289rwkw
ED Fairmont Ghia 5.0 broken
fnp is offline   Reply With Quote Multi-Quote with this Post
2 users like this post:
Old 06-08-2020, 07:27 PM   #3
Tonz
FF.Com.Au Hardcore
 
Join Date: Jun 2011
Location: Pt Lincoln far side South Oz
Posts: 5,896
Default Re: Woodworking tools

If you thought this Ford forum got busy you should (if you havent already) check this aussie forum out. something for everyone https://www.woodworkforums.com/
__________________
Dont p i s s off older people. At our age the term Life in Prison is not a deterrent
Tonz is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 07-08-2020, 06:39 AM   #4
Loonar
FF.Com.Au Hardcore
 
Loonar's Avatar
 
Join Date: Dec 2007
Location: S.E. Qld
Posts: 968
Default Re: Woodworking tools

Yep, wow, one could spend a lot of time there, thanks for the link..
Loonar is offline   Reply With Quote Multi-Quote with this Post
Old 07-08-2020, 08:50 AM   #5
roKWiz
Cabover nut
 
roKWiz's Avatar
 
Join Date: Aug 2015
Location: Onsite Eastcoast
Posts: 11,349
Default Re: Woodworking tools

Nice selection you have. I still have quite a few from owning a wooden boat.
Adze, Brace and Bit, and a little spoke shave I reckon were my favourites at the time.
__________________
heritagestonemason.com/Fordlouisvillerestoration
In order that the labour of centuries past may not be in vain during the centuries to come...... D. Diderot 1752

roKWiz is offline   Reply With Quote Multi-Quote with this Post
Old 07-08-2020, 06:37 PM   #6
Loonar
FF.Com.Au Hardcore
 
Loonar's Avatar
 
Join Date: Dec 2007
Location: S.E. Qld
Posts: 968
Default Re: Woodworking tools

Fair dinkum boat stuff.. never had a lot of luck with adze's, spoke shaves are a wonderful little tool, brace and bits too, v. handy, not much call these days with the whizz bang devices on offer..!!

Have an old Yankee screwdriver, remember them? Almost lethal with a slippage !!
Loonar is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 08-08-2020, 07:33 AM   #7
roKWiz
Cabover nut
 
roKWiz's Avatar
 
Join Date: Aug 2015
Location: Onsite Eastcoast
Posts: 11,349
Default Re: Woodworking tools

Quote:
Originally Posted by Loonar View Post
Fair dinkum boat stuff.. never had a lot of luck with adze's, spoke shaves are a wonderful little tool, brace and bits too, v. handy, not much call these days with the whizz bang devices on offer..!!

Have an old Yankee screwdriver, remember them? Almost lethal with a slippage !!
Yeah, My apprenticeship training taught me not to use power tools anyway but when it came time to convert the trawler out on the mooring, power tools just wouldn't cut it.
Funny enough the 2 best tools I had were a Alsynite saw and a Swiss army pocket knife a friend bought me.
The trawler was a huge learning curve, not a square, level plan to be found.

Still using the brace and bit as I had to cut large holes for posts current cabin building project.
__________________
heritagestonemason.com/Fordlouisvillerestoration
In order that the labour of centuries past may not be in vain during the centuries to come...... D. Diderot 1752

roKWiz is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 30-08-2020, 10:20 AM   #8
Work Horse
Budget Racer
 
Work Horse's Avatar
 
Join Date: Dec 2004
Location: Melbourne
Posts: 2,421
Default Re: Woodworking tools

I am an enthusiastic beginner with wood work and tools. The internet is a great resource for information.

I had access to a couple of old hardwood church pews. I decided to recycle them into a dinning table.

Then decided I would go old school and hand plane the table top. I remembered Dad had what I thought was an old Stanley No 4. My brothers and I used to plane; branches, nails, concrete, anything with it when we were kids.

Dad dragged it out for me and it ended up being an old Australian made Carter No 4 1/2.

__________________
12.1@112Mph 285rwkw on n2o Cleveland Power

Last edited by Work Horse; 30-08-2020 at 10:30 AM.
Work Horse is offline   Reply With Quote Multi-Quote with this Post
3 users like this post:
Old 30-08-2020, 10:28 AM   #9
Work Horse
Budget Racer
 
Work Horse's Avatar
 
Join Date: Dec 2004
Location: Melbourne
Posts: 2,421
Default Re: Woodworking tools

With the assistance of some you tube tutorials I gave it a quick clean up. I mainly concentrated on sharpening the blade and insuring the plane was flat.


To my utter delight it worked!
__________________
12.1@112Mph 285rwkw on n2o Cleveland Power
Work Horse is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 30-08-2020, 10:32 AM   #10
Citroënbender
DIY Tragic
 
Citroënbender's Avatar
 
Join Date: Apr 2018
Location: Sydney, more than not. I hate it.
Posts: 22,681
Chairman's Award: Chairman's Award - Issue reason: Your outstanding contributions to this community have not gone unnoticed. IN my view you are a worthy recipient of the (rarely used) Chairman's Award. 
Default Re: Woodworking tools

4 1/2 is a better plane IMO. That and a 5 1/2 will solve lots of basic joinery issues. 8 is tool porn territory, you really need to have the chops to make it worthwhile.

Don’t be afraid of buying a new block plane if the budget is there, from my experience the Lie-Nielson are good and one doesn’t get overly precious about loss or damage. They make a great couple of rebating planes, too.
Citroënbender is online now   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 30-08-2020, 10:39 AM   #11
Work Horse
Budget Racer
 
Work Horse's Avatar
 
Join Date: Dec 2004
Location: Melbourne
Posts: 2,421
Default Re: Woodworking tools

I now suspect something like a bread board would have been more appropriate for my first project with a hand plane!


The table is 3m X 950mm, I am on a big learning curve understanding timber and the way grain reacts to a plane.
__________________
12.1@112Mph 285rwkw on n2o Cleveland Power
Work Horse is offline   Reply With Quote Multi-Quote with this Post
2 users like this post:
Old 30-08-2020, 10:42 AM   #12
Citroënbender
DIY Tragic
 
Citroënbender's Avatar
 
Join Date: Apr 2018
Location: Sydney, more than not. I hate it.
Posts: 22,681
Chairman's Award: Chairman's Award - Issue reason: Your outstanding contributions to this community have not gone unnoticed. IN my view you are a worthy recipient of the (rarely used) Chairman's Award. 
Default Re: Woodworking tools

That is ambitious, cabinet scraper might have been another approach!

Get the iron sharper than sharp, you can cross the grain at 45-ish degrees then, provided its not rising at you.
Citroënbender is online now   Reply With Quote Multi-Quote with this Post
Old 30-08-2020, 10:47 AM   #13
Work Horse
Budget Racer
 
Work Horse's Avatar
 
Join Date: Dec 2004
Location: Melbourne
Posts: 2,421
Default Re: Woodworking tools

Quote:
Originally Posted by Citroënbender View Post
4 1/2 is a better plane IMO. That and a 5 1/2 will solve lots of basic joinery issues. 8 is tool porn territory, you really need to have the chops to make it worthwhile.

Don’t be afraid of buying a new block plane if the budget is there, from my experience the Lie-Nielson are good and one doesn’t get overly precious about loss or damage. They make a great couple of rebating planes, too.
It started off as a bit of a novelty, too see if I could actually do it.

As Loonar mentioned, "Nothing like the sound of a sharp plane blade cutting a few thou. off.. "

It is actually quite satisfying and addictive!
__________________
12.1@112Mph 285rwkw on n2o Cleveland Power
Work Horse is offline   Reply With Quote Multi-Quote with this Post
2 users like this post:
Old 30-08-2020, 10:59 AM   #14
Work Horse
Budget Racer
 
Work Horse's Avatar
 
Join Date: Dec 2004
Location: Melbourne
Posts: 2,421
Default Re: Woodworking tools

Quote:
Originally Posted by Citroënbender View Post
That is ambitious, cabinet scraper might have been another approach!
Ambitious or naive?
Quote:
Originally Posted by Citroënbender View Post
Get the iron sharper than sharp, you can cross the grain at 45-ish degrees then, provided its not rising at you.


I make a near perfect pass down a section of the table, but unfortunately the plane strays on to the next board with the grain running the other way.
__________________
12.1@112Mph 285rwkw on n2o Cleveland Power
Work Horse is offline   Reply With Quote Multi-Quote with this Post
2 users like this post:
Old 30-08-2020, 11:26 AM   #15
Citroënbender
DIY Tragic
 
Citroënbender's Avatar
 
Join Date: Apr 2018
Location: Sydney, more than not. I hate it.
Posts: 22,681
Chairman's Award: Chairman's Award - Issue reason: Your outstanding contributions to this community have not gone unnoticed. IN my view you are a worthy recipient of the (rarely used) Chairman's Award. 
Default Re: Woodworking tools

It’s a problem (picking up the grain) that’s worse with a short plane. Is your iron super sharp?

A torture board or speed file will allow cheating, you can subtly dress down the torn grain area in a work zone of a foot or more, and then scrape along the grain to remove sanding scratches. A properly sharpened cabinet scraper will deal with rising grain.

I don’t see it as naïveté to try your approach, it’s just the learning curve.
Citroënbender is online now   Reply With Quote Multi-Quote with this Post
Old 30-08-2020, 11:44 AM   #16
Work Horse
Budget Racer
 
Work Horse's Avatar
 
Join Date: Dec 2004
Location: Melbourne
Posts: 2,421
Default Re: Woodworking tools

Quote:
Originally Posted by Citroënbender View Post
It’s a problem (picking up the grain) that’s worse with a short plane. Is your iron super sharp?
Yes scarey sharp, I can shave the hairs off my arm or cut my finger if I go near it without gloves!
Quote:
Originally Posted by Citroënbender View Post
A torture board or speed file will allow cheating, you can subtly dress down the torn grain area in a work zone of a foot or more, and then scrape along the grain to remove sanding scratches. A properly sharpened cabinet scraper will deal with rising grain.
It is not in the spirit of this thread, but I feel it is time for the belt sander!

Quote:
Originally Posted by Citroënbender View Post
I don’t see it as naïveté to try your approach, it’s just the learning curve.
I have spent many many hours on the back of this plane, and yes it has been a fun learning curve!
__________________
12.1@112Mph 285rwkw on n2o Cleveland Power
Work Horse is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 30-08-2020, 11:49 AM   #17
Citroënbender
DIY Tragic
 
Citroënbender's Avatar
 
Join Date: Apr 2018
Location: Sydney, more than not. I hate it.
Posts: 22,681
Chairman's Award: Chairman's Award - Issue reason: Your outstanding contributions to this community have not gone unnoticed. IN my view you are a worthy recipient of the (rarely used) Chairman's Award. 
Default Re: Woodworking tools

It might sound odd, but try lightly planing at 90° to the problem area. Your shaving (per iron depth) should be one ply of tissue thick.
Citroënbender is online now   Reply With Quote Multi-Quote with this Post
2 users like this post:
Old 30-08-2020, 11:56 AM   #18
nitro50th
Regular Member
 
nitro50th's Avatar
 
Join Date: Apr 2005
Posts: 323
Default Re: Woodworking tools

Woodwork and owning a car are one and the same, You cant stop buying parts or tools!!

I have enjoyed working with wood for a few years and have accumulated lots of tools, especially clamps, planes and chisels. Bloody clamps, I have way too many.

I also have some tools from my father and grandfather, which are my pride and joy. I love that I can make something using a tool that my father and grandfather have also used in years gone by.

I mostly enjoy making boxes with various timbers. Here are the last ones I made, the same box using different species of wood. The Walnut box being my favorite.

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]
__________________
Past:
96 EF Futura
98 XH XR8 ute
05 BF XR6
10 FG XR50

Present:
81 XD Falcon 351.
nitro50th is offline   Reply With Quote Multi-Quote with this Post
Old 30-08-2020, 12:17 PM   #19
Citroënbender
DIY Tragic
 
Citroënbender's Avatar
 
Join Date: Apr 2018
Location: Sydney, more than not. I hate it.
Posts: 22,681
Chairman's Award: Chairman's Award - Issue reason: Your outstanding contributions to this community have not gone unnoticed. IN my view you are a worthy recipient of the (rarely used) Chairman's Award. 
Default Re: Woodworking tools

Tidy work! I like the tapering bevels.
Citroënbender is online now   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 29-09-2020, 11:02 AM   #20
Loonar
FF.Com.Au Hardcore
 
Loonar's Avatar
 
Join Date: Dec 2007
Location: S.E. Qld
Posts: 968
Default Re: Woodworking tools

Once again not a project as such, thought people may be interested in this mechanical (clockwork driven) fly trap..

It would seem to have been made by "Owari Watchmaking Co." (Japanese, circa 1910's), quite an amazing piece of work, don't have a vid., but barrel rotates, flies (lured by a bait) then land on it, to be swept into chamber where they can't escape..!!

Apparently alive so they can be fed to other critters !![IMG][/IMG]
Loonar is offline   Reply With Quote Multi-Quote with this Post
8 users like this post:
Old 29-09-2020, 07:50 PM   #21
PG2
#neuteredlyfe
Donating Member2
 
PG2's Avatar
 
Join Date: Apr 2012
Posts: 10,675
Default Re: Woodworking tools

Quote:
Originally Posted by Loonar View Post
Once again not a project as such...
These threads don't necessarily have to be specifically about a project. They can be about anything of interest.

We probably should rename this area to Projects / Other Interests / Collections (non car related)
PG2 is offline   Reply With Quote Multi-Quote with this Post
Old 29-09-2020, 09:04 PM   #22
Work Horse
Budget Racer
 
Work Horse's Avatar
 
Join Date: Dec 2004
Location: Melbourne
Posts: 2,421
Default Re: Woodworking tools

Quote:
Originally Posted by PG2 View Post
These threads don't necessarily have to be specifically about a project. They can be about anything of interest.

We probably should rename this area to Projects / Other Interests / Collections (non car related)
Bring on the fly trap thread!
__________________
12.1@112Mph 285rwkw on n2o Cleveland Power
Work Horse is offline   Reply With Quote Multi-Quote with this Post
Old 15-01-2021, 06:44 PM   #23
Work Horse
Budget Racer
 
Work Horse's Avatar
 
Join Date: Dec 2004
Location: Melbourne
Posts: 2,421
Default Re: Woodworking tools



I have made all the components for my table, a final sand and time to; glue, screw and clamp.
__________________
12.1@112Mph 285rwkw on n2o Cleveland Power
Work Horse is offline   Reply With Quote Multi-Quote with this Post
6 users like this post:
Old 15-01-2021, 06:57 PM   #24
Loonar
FF.Com.Au Hardcore
 
Loonar's Avatar
 
Join Date: Dec 2007
Location: S.E. Qld
Posts: 968
Default Re: Woodworking tools

A big project and it looks like a job well done..
Loonar is offline   Reply With Quote Multi-Quote with this Post
3 users like this post:
Old 15-01-2021, 07:02 PM   #25
Ross 1
Donating Member
Donating Member3
 
Join Date: Oct 2013
Location: Wellington NZ
Posts: 11,431
Default Re: Woodworking tools

Nice work. I am slowly rebuilding my collection of chisels and planes, the garage was broken into about 4-5 months ago. They left all the power tools, literally 10ks worth, took most of the beer from the fridge and just happened to grab an old hessian bag that most of my chisels and planes were individually wrapped and stored in.
Ross 1 is offline   Reply With Quote Multi-Quote with this Post
2 users like this post:
Old 15-01-2021, 07:55 PM   #26
Loonar
FF.Com.Au Hardcore
 
Loonar's Avatar
 
Join Date: Dec 2007
Location: S.E. Qld
Posts: 968
Default Re: Woodworking tools

^^^^ A very low act, any theft is, but this one, gut wrenching..^^^^
Loonar is offline   Reply With Quote Multi-Quote with this Post
4 users like this post:
Old 15-01-2021, 10:21 PM   #27
Pis-ton broke
Banned
 
Pis-ton broke's Avatar
 
Join Date: Jan 2009
Posts: 1,621
Default Re: Woodworking tools

Quote:
Originally Posted by nitro50th View Post
Woodwork and owning a car are one and the same, You cant stop buying parts or tools!!

I have enjoyed working with wood for a few years and have accumulated lots of tools, especially clamps, planes and chisels. Bloody clamps, I have way too many.

I also have some tools from my father and grandfather, which are my pride and joy. I love that I can make something using a tool that my father and grandfather have also used in years gone by.

I mostly enjoy making boxes with various timbers. Here are the last ones I made, the same box using different species of wood. The Walnut box being my favorite.

image]image[/URL]

image]image[/URL]

image]image[/URL]
wow, i reckon your work is beautiful.
do you sell it?
if you go to Launceston ,tas. there is a wood product display and most is for sale. i thought there stuff was beautifully designed and made. but the woods products shop is defiantly worth a visit.
Pis-ton broke is offline   Reply With Quote Multi-Quote with this Post
Old 03-04-2021, 01:13 AM   #28
Interceptor
HSV - I just ate one!
 
Interceptor's Avatar
 
Join Date: Dec 2004
Location: Middle of nowhere
Posts: 3,206
Default Re: Woodworking tools

whats really concerning me atm is dads tool collection is in the hands of his partners family, and whilst I don't trust the entire lot of them as far as I could chuck'em, i'm not able to do a whole lot about it....

he's a 75yo retired wooden boatbuilder and tool hoarder.....
__________________
I dont care if some prius driving eco-hippy thinks its politically incorrect for me to drive a V8..... I'm paying for the fuel!
Interceptor is offline   Reply With Quote Multi-Quote with this Post
2 users like this post:
Old 27-04-2021, 04:11 PM   #29
Loonar
FF.Com.Au Hardcore
 
Loonar's Avatar
 
Join Date: Dec 2007
Location: S.E. Qld
Posts: 968
Default Re: Woodworking tools












Just as addendum to the 1st post re. Silky Oak table.. Their are 6 S.O. chairs as well, over time these had gotten a bit ratty. (The whole lot was made in 1950 after all)

Finally got around to refurbishing them as well, time consuming process..strip off old stain/varnish (i used Diggers, for domestic use, i.e., low toxicity, water clean up), reglue joints etc., a bit of a sand, then a wood oil application, v. easy (2 or 3 coats). The Mrs. recovered the seats with some vinyl to match the lighter veneer used on the seat backs, just some Cabots clear coat (again 2 or 3, also water clean up). I used some stainless cheese head screws to hold the back on, they look the part too.. Bob is your Uncle..

Couldn't get a S.O. veneer, so settled for an American White Pine (030" thick, nice contrast we thought), after stripping off the layer which was cracked and broken, on 1/2" ply, which we couldn't hope to replicate, the ply also was curved !! It kept me out of mischief for a while, just pottering along at my leisure..

Alas now though i have to find some other wood project to keep me occupied, plenty of other stuff to do, but always good to be playing with wood !!
Loonar is offline   Reply With Quote Multi-Quote with this Post
5 users like this post:
Old 27-04-2021, 06:07 PM   #30
Tonz
FF.Com.Au Hardcore
 
Join Date: Jun 2011
Location: Pt Lincoln far side South Oz
Posts: 5,896
Default Re: Woodworking tools

Quote:
Originally Posted by Interceptor View Post
whats really concerning me atm is dads tool collection is in the hands of his partners family, and whilst I don't trust the entire lot of them as far as I could chuck'em, i'm not able to do a whole lot about it....

he's a 75yo retired wooden boatbuilder and tool hoarder.....
sorry just saw your post, there is an answer, its not totally legal, in fact its far from it, but burglaries do still happen and either at night time or when no one is around......................just saying.
__________________
Dont p i s s off older people. At our age the term Life in Prison is not a deterrent
Tonz is offline   Reply With Quote Multi-Quote with this Post
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 10:54 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL