|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
Project Builds (non Car) Here is an area where you can show / discuss other non car builds be they bikes, caravans, boats, BBQ's or whatever. |
|
Thread Tools | Display Modes |
|
17-05-2020, 09:30 PM | #1 | ||
Looking for clues...
Join Date: Jan 2005
Location: Morayfield
Posts: 23,606
|
I'm partway through this project, I started it over a year ago, then put it away for a year while thinking of ideas.
This is what I bought. It's styled on a Fender Starcaster, which was Fender's foray into hollow bodied guitars to compete with Gibson way back then. I bought the kit from a WA company who has them made with enough differences that they don't infringe on copyrite. and the raw bits and pieces sort of pieced together... I've stained and started applying clear to the face I've now joined the neck to the body, and trying to work out a logo, and playing with a 3d printer to make this work. Stay tuned...
__________________
2016 Ford Falcon FG/X XR6 Turbo you beaut ute 1985 XR4Ti Sierra - Build Thread 1971 Fairlane 500 and... a collection of Jeep Towpigs and... two collections of rust and some new plastic bits roughly shaped like an F-Truck and.... some spare metal bits with holes in them |
||
17-05-2020, 09:50 PM | #2 | ||
Looking for clues...
Join Date: Jan 2005
Location: Morayfield
Posts: 23,606
|
Last weekend I flattened and dressed the fretboard.
__________________
2016 Ford Falcon FG/X XR6 Turbo you beaut ute 1985 XR4Ti Sierra - Build Thread 1971 Fairlane 500 and... a collection of Jeep Towpigs and... two collections of rust and some new plastic bits roughly shaped like an F-Truck and.... some spare metal bits with holes in them |
||
5 users like this post: |
18-05-2020, 12:56 AM | #3 | ||
Banned
Join Date: Jan 2009
Posts: 1,621
|
nice work
|
||
2 users like this post: |
18-05-2020, 12:04 PM | #4 | ||
AU3 ute EL futura
Join Date: Oct 2008
Location: Brisbane
Posts: 485
|
Gee I never thought I'd see a starcaster kit. I remember seeing them in the 70's. No one wanted them, or the other hollow body fender made, can't remember the name.
|
||
This user likes this post: |
18-05-2020, 12:28 PM | #5 | ||
DIY Tragic
Join Date: Apr 2018
Location: Sydney, more than not. I hate it.
Posts: 22,757
|
The Coronado, with its cheesy-tinny-awful DeArmond budget pickups? As used by Hunters and Collectors in Wildwood variant?
|
||
2 users like this post: |
19-05-2020, 06:21 AM | #6 | ||||
Looking for clues...
Join Date: Jan 2005
Location: Morayfield
Posts: 23,606
|
Quote:
Quote:
GuitarFetish
__________________
2016 Ford Falcon FG/X XR6 Turbo you beaut ute 1985 XR4Ti Sierra - Build Thread 1971 Fairlane 500 and... a collection of Jeep Towpigs and... two collections of rust and some new plastic bits roughly shaped like an F-Truck and.... some spare metal bits with holes in them |
||||
19-05-2020, 06:52 AM | #7 | ||
Banned
Join Date: Apr 2014
Posts: 638
|
Cool project. Never knew about these, so checked out the pit bull site and was keen on the bc1 shredder until I realized it's not as simple as bolting together. I assume there's heaps of modifying & correcting flaws to make it playable?
|
||
This user likes this post: |
19-05-2020, 07:08 AM | #8 | ||
Looking for clues...
Join Date: Jan 2005
Location: Morayfield
Posts: 23,606
|
Surprisingly, they go together really well. This is my fourth build, I built a Mockingbird style for my son, who loves his shredding, that one involved routing a cavity for a 9v battery for active pickups. The factory generally have their jugs set up well.
__________________
2016 Ford Falcon FG/X XR6 Turbo you beaut ute 1985 XR4Ti Sierra - Build Thread 1971 Fairlane 500 and... a collection of Jeep Towpigs and... two collections of rust and some new plastic bits roughly shaped like an F-Truck and.... some spare metal bits with holes in them |
||
This user likes this post: |
19-05-2020, 11:24 AM | #9 | ||
AU3 ute EL futura
Join Date: Oct 2008
Location: Brisbane
Posts: 485
|
Fender wide range humbuckers are no longer available. The originals used an alloy which is basically unobtainable now. The repros all use common alloys now and don't sound exactly the same. They are a different size to paf copies, bigger, and won't fit in gibson routes. They are basically 2 fender single coils in a bucker package.
The GFs are about the cheapest copies you will find anywhere. I've not heard any comparisons that are good enough to tell what they sound like. GF have a generally ok reputation though... I notice the kit pic has a stop tail and yours has a jazz style tail ? Was that a special order or have they changed the kit ? |
||
19-05-2020, 11:44 AM | #10 | ||
DIY Tragic
Join Date: Apr 2018
Location: Sydney, more than not. I hate it.
Posts: 22,757
|
Was it one of those alloys rumoured to have uranium in it, or something?
|
||
20-05-2020, 12:06 PM | #11 | |||
AU3 ute EL futura
Join Date: Oct 2008
Location: Brisbane
Posts: 485
|
Quote:
Those sort of details are really for cork sniffers anyway, I'm sure the gfs pups will sound great, but if they don't, and you haven't cut the wires too short I might take them off your hands anyway. |
|||
This user likes this post: |
20-05-2020, 01:01 PM | #12 | |||
Looking for clues...
Join Date: Jan 2005
Location: Morayfield
Posts: 23,606
|
Quote:
__________________
2016 Ford Falcon FG/X XR6 Turbo you beaut ute 1985 XR4Ti Sierra - Build Thread 1971 Fairlane 500 and... a collection of Jeep Towpigs and... two collections of rust and some new plastic bits roughly shaped like an F-Truck and.... some spare metal bits with holes in them |
|||
19-05-2020, 06:11 PM | #13 | |||
Looking for clues...
Join Date: Jan 2005
Location: Morayfield
Posts: 23,606
|
Quote:
I see on the new picture, the output jack has moved as well.
__________________
2016 Ford Falcon FG/X XR6 Turbo you beaut ute 1985 XR4Ti Sierra - Build Thread 1971 Fairlane 500 and... a collection of Jeep Towpigs and... two collections of rust and some new plastic bits roughly shaped like an F-Truck and.... some spare metal bits with holes in them |
|||
04-06-2020, 06:42 PM | #14 | ||
Looking for clues...
Join Date: Jan 2005
Location: Morayfield
Posts: 23,606
|
I decided to start fitting some hardware on the guitar this afternoon. First I had to fit the bridge mounts, which meant taking a hammer to pound them in. I fitted a couple of strings, and lined up the tail piece and screwed it in.
I'll head around to Jaycar tomorrow to see what types of shielded cable they have, and make up a wiring harness. I grabbed a piece of cardboard and mapped out where the volume and tone pots, pickup switch and output jack are located. Then I'll install it through an F-hole.
__________________
2016 Ford Falcon FG/X XR6 Turbo you beaut ute 1985 XR4Ti Sierra - Build Thread 1971 Fairlane 500 and... a collection of Jeep Towpigs and... two collections of rust and some new plastic bits roughly shaped like an F-Truck and.... some spare metal bits with holes in them |
||
05-06-2020, 05:16 PM | #15 | ||
Looking for clues...
Join Date: Jan 2005
Location: Morayfield
Posts: 23,606
|
Well, once the end is near, it’s full steam ahead!All the knobs, pickups and switch all connected and installed. I threw on a cheap set of strings to set it up, I had to raise the nut by about 1mm to get rid of a bit of fret buzz, but first play and it went alright!
__________________
2016 Ford Falcon FG/X XR6 Turbo you beaut ute 1985 XR4Ti Sierra - Build Thread 1971 Fairlane 500 and... a collection of Jeep Towpigs and... two collections of rust and some new plastic bits roughly shaped like an F-Truck and.... some spare metal bits with holes in them |
||
06-06-2020, 08:37 PM | #16 | ||
DIY Tragic
Join Date: Apr 2018
Location: Sydney, more than not. I hate it.
Posts: 22,757
|
You don't need to hit the knurled inserts in - do you have a drill press?
Set the body on a soft cloth, on the press table, and wind the chuck fully open. Use a small "pad" of hardwood between the chuck and insert as you turn the handwheel and bring the (non-turning) chuck down directly above it. Where did you run the earth wire - to the bridge studs or tailpiece bracket? Good to see a less ordinary guitar build, especially coming to fruition. |
||
This user likes this post: |
06-06-2020, 09:42 PM | #17 | |||
Looking for clues...
Join Date: Jan 2005
Location: Morayfield
Posts: 23,606
|
Quote:
Good tip about the drill press, the body wouldn't have fit in the frame of the hydraulic press though I ran the earth to one of the bridge studs, and was very careful. On my last build, the earth didn't stay in place, so I ran it to the tailpiece instead. Both work well, though. I had my sons visit this morning, and one of them has taken up axe-wielding, and tried it out. He started falling in love with it. I played with the bridge height settings today, and wore out my fingertips, thoroughly enjoyed it! This was my last build, with the unseen tailpiece earth
__________________
2016 Ford Falcon FG/X XR6 Turbo you beaut ute 1985 XR4Ti Sierra - Build Thread 1971 Fairlane 500 and... a collection of Jeep Towpigs and... two collections of rust and some new plastic bits roughly shaped like an F-Truck and.... some spare metal bits with holes in them |
|||
06-06-2020, 10:18 PM | #18 | ||
DIY Tragic
Join Date: Apr 2018
Location: Sydney, more than not. I hate it.
Posts: 22,757
|
That one looks fun, like a White Falcon dallied with a 6120.
|
||
This user likes this post: |
06-06-2020, 10:30 PM | #19 | |||
Looking for clues...
Join Date: Jan 2005
Location: Morayfield
Posts: 23,606
|
Quote:
__________________
2016 Ford Falcon FG/X XR6 Turbo you beaut ute 1985 XR4Ti Sierra - Build Thread 1971 Fairlane 500 and... a collection of Jeep Towpigs and... two collections of rust and some new plastic bits roughly shaped like an F-Truck and.... some spare metal bits with holes in them Last edited by Captain Stubing; 06-06-2020 at 10:38 PM. |
|||
10-06-2020, 09:40 PM | #20 | ||
Banned
Join Date: Jun 2010
Posts: 2,811
|
Can we hear you playing one of these Captain???
|
||
This user likes this post: |
10-06-2020, 09:54 PM | #21 | ||
Looking for clues...
Join Date: Jan 2005
Location: Morayfield
Posts: 23,606
|
I'm not much of a player, not being in a band, or having a goal to practice for, I've not really progressed. But it's thoroughly enjoying making these guitars, and selling off my Taiwanese made ones. I'll keep the classic guitar I got when I was 10, the Hoffner I got when I was 11, my Magnum I bought in the 80's and the Maton accoustic. Anything else will be home assembled.
Though I could try record something, to show what a kit guitar sounds like...
__________________
2016 Ford Falcon FG/X XR6 Turbo you beaut ute 1985 XR4Ti Sierra - Build Thread 1971 Fairlane 500 and... a collection of Jeep Towpigs and... two collections of rust and some new plastic bits roughly shaped like an F-Truck and.... some spare metal bits with holes in them |
||
2 users like this post: |
10-06-2020, 10:00 PM | #22 | ||
Banned
Join Date: Jun 2010
Posts: 2,811
|
I would love to hear its tones...
|
||
10-06-2020, 10:30 PM | #23 | ||
Looking for clues...
Join Date: Jan 2005
Location: Morayfield
Posts: 23,606
|
I'll see what I can do when I have my next days off... I better get practicing!
__________________
2016 Ford Falcon FG/X XR6 Turbo you beaut ute 1985 XR4Ti Sierra - Build Thread 1971 Fairlane 500 and... a collection of Jeep Towpigs and... two collections of rust and some new plastic bits roughly shaped like an F-Truck and.... some spare metal bits with holes in them |
||
This user likes this post: |
10-06-2020, 10:31 PM | #24 | ||
DIY Tragic
Join Date: Apr 2018
Location: Sydney, more than not. I hate it.
Posts: 22,757
|
Don’t be shy, you must be better than me.
|
||
This user likes this post: |
13-08-2020, 09:05 PM | #25 | ||
Looking for clues...
Join Date: Jan 2005
Location: Morayfield
Posts: 23,606
|
Rather than practicing, I've embarked on another build... this time a bass guitar. Never having played bass guitar before, I can only imagine it's not that hard.
I haven't decided on a colour scheme yet, whether to exploit the grain of the timber, or go for a solid colour. Here's the opened kit after I opened it...
__________________
2016 Ford Falcon FG/X XR6 Turbo you beaut ute 1985 XR4Ti Sierra - Build Thread 1971 Fairlane 500 and... a collection of Jeep Towpigs and... two collections of rust and some new plastic bits roughly shaped like an F-Truck and.... some spare metal bits with holes in them |
||
4 users like this post: |
16-08-2020, 09:36 PM | #26 | ||
DIY Tragic
Join Date: Apr 2018
Location: Sydney, more than not. I hate it.
Posts: 22,757
|
Is that a medium scale, or did the camera shorten it?
You might enjoy a bajo sexto build, they’re a niche thing and not everyone likes the tonal range. |
||
16-08-2020, 09:43 PM | #27 | |||
Looking for clues...
Join Date: Jan 2005
Location: Morayfield
Posts: 23,606
|
Quote:
It's a 34" scale, so a standard size. As for the bajo sexto, I'll have to research that one a bit, I've not heard of it before.
__________________
2016 Ford Falcon FG/X XR6 Turbo you beaut ute 1985 XR4Ti Sierra - Build Thread 1971 Fairlane 500 and... a collection of Jeep Towpigs and... two collections of rust and some new plastic bits roughly shaped like an F-Truck and.... some spare metal bits with holes in them |
|||
16-08-2020, 10:08 PM | #28 | ||
DIY Tragic
Join Date: Apr 2018
Location: Sydney, more than not. I hate it.
Posts: 22,757
|
With a bit of fiddling you can make a bajo sexto neck for a Tele, that works 100% with a regular guitar body.
|
||
16-08-2020, 10:21 PM | #29 | ||
Looking for clues...
Join Date: Jan 2005
Location: Morayfield
Posts: 23,606
|
It wouldn't take much fiddling, the mob I buy my kits from also sell custom necks. So a 24 fret neck to suit a Tele body possible, and in different lengths as well.
I have drooled over some of the Telecaster kit's I've seen made, so now you've planted a seed... If my wife complains, I'm dropping your name.
__________________
2016 Ford Falcon FG/X XR6 Turbo you beaut ute 1985 XR4Ti Sierra - Build Thread 1971 Fairlane 500 and... a collection of Jeep Towpigs and... two collections of rust and some new plastic bits roughly shaped like an F-Truck and.... some spare metal bits with holes in them |
||
This user likes this post: |
17-08-2020, 08:25 AM | #30 | ||
Cabover nut
Join Date: Aug 2015
Location: Onsite Eastcoast
Posts: 11,391
|
Very nice. I'm waiting for the Mandolin build.
__________________
heritagestonemason.com/Fordlouisvillerestoration In order that the labour of centuries past may not be in vain during the centuries to come...... D. Diderot 1752
|
||
3 users like this post: |
Thread Tools | |
Display Modes | |
|