Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Escort, Cortina, Sierra and Capri

Reply
 
Thread Tools Display Modes
Old 19-01-2010, 06:52 PM   #31
capri280
Starter Motor
 
Join Date: Nov 2008
Location: Brisbane
Posts: 16
Default

Quote:
Ugly, can you elaborate on the compliance issues you had? I would be guessing - Head/tail lights - Door intrusion beams - Child seat restraint anchors - Need a cat in a post-86 car (emissions regs) - Seatbelt mounts possibly Also you'd need a new radio I believe if you want to get AM stations at least.
no cat required,but emission test required
but had to replace ALL seat belts,
child restraints added
intrusion bars added
no problems with head light/tail lights and mine has been converted to BMW headlights.
tyres ok
brake lines had to be changed due to the fact i had braided on also didn't have any problem with having discs all round
stearing column nearly had to be changed due to being one piece but they got round that some how (didn't ask how)
radio stays original no problems there
that was about it,
my biggest problem is finding a seat belt that would work verticaly,(and Still looking for that one)
capri280 is offline   Reply With Quote Multi-Quote with this Post
Old 19-01-2010, 06:58 PM   #32
capri280
Starter Motor
 
Join Date: Nov 2008
Location: Brisbane
Posts: 16
Default

Quote:
speedo in KPH as well. Tyre,s maybe. and lots of red tape.
ossie cossie, the speedo in mine has both MPH and kph although i have made the mistake between the two a couple of time
but yes you are right lots and lots of red tape and circus tricks to get sorted
biggest problem was getting through quarrantine,(biggest bunch of theives i've ever met..
sent me invocie for $700 for steam cleaning that has NEVER BEEN DONE!
but no point arguing as no money! no car!!!!!! :
capri280 is offline   Reply With Quote Multi-Quote with this Post
Old 19-01-2010, 07:00 PM   #33
capri280
Starter Motor
 
Join Date: Nov 2008
Location: Brisbane
Posts: 16
Default

Skinkis
that one nice car mate!
capri280 is offline   Reply With Quote Multi-Quote with this Post
Old 22-01-2010, 02:57 PM   #34
ossie cossie
Regular Member
 
Join Date: Oct 2007
Posts: 74
Default

Ugly what car did you import? and did it get through with the speedo in both MPH and KPH?
ossie cossie is offline   Reply With Quote Multi-Quote with this Post
Old 22-01-2010, 05:28 PM   #35
outback_ute
Ute Forum Moderator
Contributing Member
 
outback_ute's Avatar
 
Join Date: Dec 2004
Location: Melb
Posts: 7,227
Default

Thanks for the feedback Ugly, it is interesting the differences between here and overseas. Eg all Australian cars have had side intrusion bars since ~1976, and collapsible steering columns from ~1972-73 - I find it hard to imagine that the latter were not in place in Europe in the 1980's!
outback_ute is offline   Reply With Quote Multi-Quote with this Post
Old 22-01-2010, 06:06 PM   #36
capri280
Starter Motor
 
Join Date: Nov 2008
Location: Brisbane
Posts: 16
Default

Yeah i know i thought it wold have had a collapsable column but i think they got round it because of the steering box but nott too sure. may have just been lucky.
i imported a capri 280 build #6
now comes the exspensive part rebuilding to to concourse state
the speedo never came into it!
capri280 is offline   Reply With Quote Multi-Quote with this Post
Old 25-01-2010, 07:41 PM   #37
skinkis
Cosworth abuser!
 
skinkis's Avatar
 
Join Date: May 2009
Location: Perth
Posts: 67
Default

Quote:
Originally Posted by Ugly
Skinkis
that one nice car mate!
Cheers!
Canīt wait for July to go to Sweden and take it for a drive...
Currently having a new engine built for it as well...
Longstudded block, new pistons and bearings everywhere etc.
Will be interesting to see what type of power itīll produce
__________________
Ford Sierra RS Cosworth 4x4 -92 The 1/4-mile racer.
FPV F6 Tornado 2006 The Daily Driver.
skinkis is offline   Reply With Quote Multi-Quote with this Post
Old 27-01-2010, 09:13 PM   #38
abbott
Starter Motor
 
Join Date: May 2009
Posts: 11
Default

sweet car dude
abbott is offline   Reply With Quote Multi-Quote with this Post
Old 28-01-2010, 09:03 AM   #39
BA SR FALCON
Regular Member
 
BA SR FALCON's Avatar
 
Join Date: Apr 2009
Posts: 78
Default your car

Is that licenced in WA ? how hard was it ? i have a 1959 escort van full custom and would love that moter and box in it ... do u know of any over hear.. Cheers... Great pic's too
BA SR FALCON is offline   Reply With Quote Multi-Quote with this Post
Old 28-01-2010, 02:49 PM   #40
skinkis
Cosworth abuser!
 
skinkis's Avatar
 
Join Date: May 2009
Location: Perth
Posts: 67
Default

Quote:
Originally Posted by BA SR FALCON
Is that licenced in WA ? how hard was it ? i have a 1959 escort van full custom and would love that moter and box in it ... do u know of any over hear.. Cheers... Great pic's too

If youīre talking about my bronze-coloured Cossie, then no, it isnīt licensed in WA yet, havenīt owned it for a year yet so havenīt tried to import it as a personal import, but Iīll look into it in June/July...
__________________
Ford Sierra RS Cosworth 4x4 -92 The 1/4-mile racer.
FPV F6 Tornado 2006 The Daily Driver.
skinkis is offline   Reply With Quote Multi-Quote with this Post
Old 28-01-2010, 03:38 PM   #41
LimeGlaze
FF.Com.Au Hardcore
 
LimeGlaze's Avatar
 
Join Date: Jan 2006
Location: Perth, Western Australia
Posts: 549
Default

I think it may pay to double check your info - I wasn't aware of personal imports being permitted when you don't reside in the country of origin for those 12 months? Also the 15 year rule has been abolished - there is now a flat year cut-off - 1989 from memory. Cars produced after 1989 are regulated as to what is permitted in and not. If you can import the car as a personal import, you can get around this, but if not, you will need to determine if the car can be complied for Australian roads.

If you still had the white one and providing it could be imported into Australia legally, it could have been registered for the road as a "rally car" - I have a few acquaintances with caged cars and legal West Australian registration
LimeGlaze is offline   Reply With Quote Multi-Quote with this Post
Old 29-01-2010, 03:12 AM   #42
skinkis
Cosworth abuser!
 
skinkis's Avatar
 
Join Date: May 2009
Location: Perth
Posts: 67
Default

Quote:
Originally Posted by LimeGlaze
I think it may pay to double check your info - I wasn't aware of personal imports being permitted when you don't reside in the country of origin for those 12 months? Also the 15 year rule has been abolished - there is now a flat year cut-off - 1989 from memory. Cars produced after 1989 are regulated as to what is permitted in and not. If you can import the car as a personal import, you can get around this, but if not, you will need to determine if the car can be complied for Australian roads.
Iīve only read abit online about personal imports, since Iīm still "written" in Sweden as a resident it shouldnīt be a problem hopefully.
The biggest problem with getting it to Australia will probably be the massive power it produces.. It doensīt look stock under the bonnet and it runs on E85...
__________________
Ford Sierra RS Cosworth 4x4 -92 The 1/4-mile racer.
FPV F6 Tornado 2006 The Daily Driver.
skinkis is offline   Reply With Quote Multi-Quote with this Post
Old 14-05-2012, 12:36 PM   #43
graham_h
FF.Com.Au Hardcore
 
graham_h's Avatar
 
Join Date: Jan 2009
Posts: 2,146
Default Re: Importing a Cosworth to Perth

an old thread I know but did you get the Cosworth registered here yet ?
graham_h is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 02:35 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL