|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
30-01-2015, 12:45 AM
|
#1 | ||
|
Starter Motor
Join Date: Jan 2015
Posts: 7
|
To the people that have had put a front lip on there FiSt. Could you post a pic 😆
|
||
|
|
|
30-01-2015, 06:34 PM
|
#2 | ||
|
Regular Member
Join Date: Nov 2013
Location: Sydney
Posts: 234
|
My Mountuned Molten Orange with the Tripple R Composits front splitter.
   Car is lowered with Mountune springs. Intercooler grill removed and lower front bar plastidipped. |
||
|
|
|
|
31-01-2015, 12:14 AM
|
#3 | ||
|
Starter Motor
Join Date: Jan 2015
Posts: 7
|
Nice ride mate, didnt think anyone was going to reply . Where abouts you buy that kind from?.
Woodyst. |
||
|
|
|
|
02-02-2015, 08:00 PM
|
#5 | ||
|
Starter Motor
Join Date: Jan 2015
Posts: 7
|
What brand is that one? How was the install?
|
||
|
|
|
|
02-02-2015, 09:01 PM
|
#6 | ||
|
Starter Motor
Join Date: Nov 2014
Posts: 3
|
Cheers
It's the same one as Dreadly's - Triple R and got it from Pumaspeed http://www.pumaspeed.co.uk/product-F...lade_16145.jsp I actually had it installed by my local bodyshop as I wanted it done right due to stories of DIY's having them deflect/fall off at speed due to the lack of support in the middle - which is just a big gap. I ended up buying a length of this stuff http://www.bunnings.com.au/metalmate...-tube_p1067784 and cutting 2 short pieces which were about 20mm from memory. They sit in the gap and have a bolt which goes up the guts and holds the middle in place. The stock bolts arent too crash hot either so I got my own of those. Shop ended up pulling the whole front off to make it solid. $130 install which I thought was worth it. |
||
|
|
|
|
03-02-2015, 08:01 AM
|
#7 | ||
|
Starter Motor
Join Date: Jan 2015
Posts: 7
|
Ouch delivery is a killer on there. Very nice lip btw.
|
||
|
|
|
|
03-02-2015, 01:24 PM
|
#8 | ||
|
Starter Motor
Join Date: Nov 2014
Posts: 3
|
Yeah but I got a Milltek cat back system at the same time and total shipping was only $30 more so that was ok (given the zort was about $500 cheaper to ship from OS than source locally)
|
||
|
|
|
|
03-02-2015, 05:45 PM
|
#9 | |||
|
Regular Member
Join Date: Nov 2013
Location: Sydney
Posts: 234
|
Quote:
From memory, I think there was 4, and they worked out at around $240 - $250 each, inc shipping. (Aussie $ was stronger back then though!) Don't know if they have their own website, but you can find them on the facebook. The install is relatively easy, as long as you don't have shovels for hands. I didn't bother with any central fixings like "theblacktexta" has described, and it's been on there for over a year now, I've rubbed it a few times, but it's still as solid as it was on day 1! |
|||
|
|
|
|
03-02-2015, 06:10 PM
|
#10 | ||
|
FF.Com.Au Hardcore
Join Date: Jul 2005
Location: Victoria
Posts: 1,007
|
The lip just sets the front off!
Do you if there's any group buys for the lip currently on? |
||
|
|
|
|
03-02-2015, 06:19 PM
|
#11 | |||
|
Regular Member
Join Date: Nov 2013
Location: Sydney
Posts: 234
|
Quote:
Head over to fiestast.org the aussie community is growing strong over there, you may find some fellow "mexicans!" that'll b up for a group buy. |
|||
|
|
|
fiesta st frontlip
Linear Mode
