Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Laser and Telstar

Reply
 
Thread Tools Display Modes
Old 21-01-2007, 07:35 PM   #1
andyxa
Starter Motor
 
Join Date: Jan 2006
Posts: 8
Default Telstar v6 problem

got a 93 telstar 6cylender auto. When im driving along the motor will stop randomly and the hold light comes on. When ive pulled over the car will restart and be ok. Ive replaced the fuel filter/ air filter. not long ago did the coil and am at my whits end . Anybody got any idea why ? Thanks Rob

andyxa is offline   Reply With Quote Multi-Quote with this Post
Old 22-01-2007, 07:47 AM   #2
dirty hands
Over Thinker
 
dirty hands's Avatar
 
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
Default

only a guess the 02 sensor in the manifold ot a clogged catalytic converter
you might like to have the trottle position sensor looked at or the air flow meter in the air filter need replacing / electrical sensor fault can yo do a diagnositc on the engine ?

doesnt sound like a fuel problem because it starts and runs again
__________________
My car goes Brumm Brumm
dirty hands is offline   Reply With Quote Multi-Quote with this Post
Old 22-01-2007, 07:59 PM   #3
andyxa
Starter Motor
 
Join Date: Jan 2006
Posts: 8
Default

THANKS for that , will give me something to go with, Rob
andyxa is offline   Reply With Quote Multi-Quote with this Post
Old 28-01-2007, 09:18 PM   #4
carazy
Back with Boost!
 
carazy's Avatar
 
Join Date: Jan 2005
Posts: 105
Default

if the hold light is comming on my guess would be a stuffed stall convertor in the gearbox, hence why it stops but then takes off ok later.

try the dignostics but otherwise it might be time to visit a mechanic.
carazy is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 04:27 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL