|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
26-02-2008, 12:01 PM
|
#1 | ||
|
Starter Motor
Join Date: Feb 2008
Posts: 1
|
i recently bought a 1989 laser KE GL and i have been having over heating problems i got the RAC to have a look but the guy said it was just a small leak in one of my heater hoses i have a feeling it is something more than a small leak as i am filling the radiator up every time before i start the car and it overheats within 10 minutes of driving when i pull over the water in the resevoir is normally bubbling and i can hear air escaping from somewhere but there is still some water visible in the radiator is there any other reason my car is overheating so much?
|
||
|
|
|
26-02-2008, 04:37 PM
|
#2 | ||
|
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
new radiator cap
check thermostat is not sticking shut ... take off the housing drop it in a saucepan of boiling water make sure it opens check radiator fan is working plus the thermo switch at worst head gasket needs replacing look out for water in the sump oil clogged radiator or not eneough cores clear for water flow is water pump in good condition
__________________
My car goes Brumm Brumm |
||
|
|
|
1989 laser overheating problems
Linear Mode
