Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Site Sponsor Forums - In Alphabetical Order > Race Brakes Sydney

Race Brakes Sydney Street and race performance pad / rotor combinations as well as brake upgrades and Exedy clutch kits. Website Link

Reply
 
Thread Tools Display Modes
Old 29-09-2007, 12:02 PM   #1
FLOORED
Race Brakes Sydney
 
FLOORED's Avatar
 
Join Date: Feb 2006
Location: SYDNEY
Posts: 3,608
Default 355mm 2piece disc with PBR twin piston caliper **10 only**

We have finished the twin piston 355mm brake kits and we have a limited offer of 10 kits only with two piece discs.I am giving ford forum members the first opportunity to buy them and what is left will be sold on ebay or somewhere else as i need to clear them.
The rotors are 355mm and are replaceable but have a different offset in the hat to DBA and factory so we use a spacer in the kit.If you want to run the factory 1 piece or dba 2 piece rotors down the track you just remove the spacer and presto they will fit.
Kit consists of :
1 pair = 2 piece slotted 355mm rotors
1 pair = PBR C5 red sports calipers
1 set = PBR sports brake pads
1 pair = PBR braided front lines
1 pair = brackets to suit
1 pair = spacers
1 bolt kit
$1850

The rear 328mm slotted and vented discs with the calipers to suit (not coloured) is also available as a separate purchase if needed for $640.00
Braided hoses can be purchased seperatley.

Note : The 355mm twin piston kit with 1 piece disc is $1995.00 and the rear kit will still be $640 plus rear braided lines.The kit looks fantastic and if you have big wheels that the Brembo's don't fit behind these will fill the spot.
The picture is now of the 2 piece kit thanks.
http://img03.picoodle.com/img/img03/...2m_226093f.jpg

__________________
MATTHEW PEARCE
RACE BRAKES SYDNEY = When you want it to stop

Street to track is what we expertise in

Phone 02 9609 1101

sales@racebrakessydney.com.au

www.racebrakessydney.com.au

Last edited by FLOORED; 08-10-2007 at 04:20 PM.
FLOORED is offline   Reply With Quote Multi-Quote with this Post
Old 29-09-2007, 07:32 PM   #2
Ruger
Bseries Moderator
 
Ruger's Avatar
 
Join Date: Jan 2005
Location: Sydney
Posts: 3,941
Default

Hi mate whats the smallest wheel you can get around these puppies?


cheers
__________________
Long Live the Rugerspeed Primer Destroyer!

Only those that attempt the absurd achieve the impossible.


Serviced and maintained by Mascot Auto Repairs
Ruger is offline   Reply With Quote Multi-Quote with this Post
Old 30-09-2007, 10:05 AM   #3
FLOORED
Race Brakes Sydney
 
FLOORED's Avatar
 
Join Date: Feb 2006
Location: SYDNEY
Posts: 3,608
Default

Quote:
Originally Posted by Ruger
Hi mate whats the smallest wheel you can get around these puppies?


cheers
These puppies need a 18" minimum home thanks.
We have found that there are alot of import wheels being fitted up to 20" that don't allow brembo or ap kits to be cleared and these will atleast fill that void.
__________________
MATTHEW PEARCE
RACE BRAKES SYDNEY = When you want it to stop

Street to track is what we expertise in

Phone 02 9609 1101

sales@racebrakessydney.com.au

www.racebrakessydney.com.au
FLOORED is offline   Reply With Quote Multi-Quote with this Post
Old 30-09-2007, 03:22 PM   #4
XR8-260
FF.Com.Au Hardcore
 
Join Date: Jun 2006
Posts: 2,583
Default

Quote:
Originally Posted by FLOORED
The rear 328mm slotted and vented discs with the calipers to suit (not coloured) is also available as a separate purchase if needed for $640.00
Braided hoses can be purchased seperatley.
How much for the braided hoses?

Do you also sell the 322mm front brake kit? If so, how much?

Cheers.
XR8-260 is offline   Reply With Quote Multi-Quote with this Post
Old 30-09-2007, 05:28 PM   #5
Bluehoon
Hoon On The Rise
 
Bluehoon's Avatar
 
Join Date: Mar 2005
Location: Open Roads with Boost!
Posts: 9,935
Default

Thats a damn nice kit! Wish I had the cash for it.
__________________
Stomp 'n' Steer

FGX-XR8 Manual, BFII E-Gas, '11 GSXR 1000 - Love 'em!
FPV Tickford Club of NSW - www.fpvclub.com
Bluehoon is offline   Reply With Quote Multi-Quote with this Post
Old 30-09-2007, 07:29 PM   #6
IH8TOADS
Regular Member
 
IH8TOADS's Avatar
 
Join Date: Jun 2005
Location: Perth, WA
Posts: 397
Default

Looking fwd to photos! I thought the C5 calipers had ribs on them? These look like C6. Whats the difference.
__________________
BAII XR6T 6sp man.
iTuned + stock bottom end + bolt-ons = 485rwkw

Mustang GT 5.0 6sp man.
IH8TOADS is offline   Reply With Quote Multi-Quote with this Post
Old 02-10-2007, 11:17 AM   #7
FLOORED
Race Brakes Sydney
 
FLOORED's Avatar
 
Join Date: Feb 2006
Location: SYDNEY
Posts: 3,608
Default

Quote:
Originally Posted by 3
How much for the braided hoses?

Do you also sell the 322mm front brake kit? If so, how much?

Cheers.
Depends on whether it has traction control or not as the non traction control hoses are dearer with the t-piece.
The front kit we will be suppling will be the 325mm kit same as in the PBR kit with a price soon.


Quote:
Bluehoon
Thats a damn nice kit! Wish I had the cash for it.
For Ford Forum readers only i am going to offer you the chance to layby this kit as long as it is paid off by the end of the month of October with a decent deposit but anyone wanting this offer needs to email or ring me to organise it first thanks.

Quote:
IH8PORK
Looking fwd to photos! I thought the C5 calipers had ribs on them? These look like C6. Whats the difference.
These have some ribbing at the top and back of the calipers.
__________________
MATTHEW PEARCE
RACE BRAKES SYDNEY = When you want it to stop

Street to track is what we expertise in

Phone 02 9609 1101

sales@racebrakessydney.com.au

www.racebrakessydney.com.au

Last edited by FLOORED; 02-10-2007 at 11:23 AM.
FLOORED is offline   Reply With Quote Multi-Quote with this Post
Old 08-10-2007, 04:19 PM   #8
FLOORED
Race Brakes Sydney
 
FLOORED's Avatar
 
Join Date: Feb 2006
Location: SYDNEY
Posts: 3,608
Default

This is the two-piece 355mm kit with twin piston calipers for $1850.00
http://img03.picoodle.com/img/img03/...2m_226093f.jpg
__________________
MATTHEW PEARCE
RACE BRAKES SYDNEY = When you want it to stop

Street to track is what we expertise in

Phone 02 9609 1101

sales@racebrakessydney.com.au

www.racebrakessydney.com.au
FLOORED is offline   Reply With Quote Multi-Quote with this Post
Old 08-10-2007, 06:46 PM   #9
sbutler
335 kw of goodness
 
sbutler's Avatar
 
Join Date: Dec 2004
Location: south of Newcastle
Posts: 6,244
Default

Congrats Matt, at last, a cost effective big brake upgrade!!!
Well done Matt well done..
__________________
CAUTION!
STILL Contain's opinion's & fact's that may offend !!!
:



2012 GTP 213 black what was I thinking? NOW FOR SALE>>
http://www.fordforums.com.au/showthread.php?t=11439680
sbutler is offline   Reply With Quote Multi-Quote with this Post
Old 09-10-2007, 11:51 AM   #10
FLOORED
Race Brakes Sydney
 
FLOORED's Avatar
 
Join Date: Feb 2006
Location: SYDNEY
Posts: 3,608
Default

Quote:
Originally Posted by sbutler
Congrats Matt, at last, a cost effective big brake upgrade!!!
Well done Matt well done..
Thanks and hopefully it will help some people out who can't fit or afford the bigger Brembo and AP calipers.
__________________
MATTHEW PEARCE
RACE BRAKES SYDNEY = When you want it to stop

Street to track is what we expertise in

Phone 02 9609 1101

sales@racebrakessydney.com.au

www.racebrakessydney.com.au
FLOORED is offline   Reply With Quote Multi-Quote with this Post
Old 10-10-2007, 06:26 PM   #11
sbutler
335 kw of goodness
 
sbutler's Avatar
 
Join Date: Dec 2004
Location: south of Newcastle
Posts: 6,244
Default

Quote:
Originally Posted by FLOORED
Thanks and hopefully it will help some people out who can't fit or afford the bigger Brembo and AP calipers.
You can bet it will, they would be more than enough brakes for street driving, & club days!! woo hoo!!
__________________
CAUTION!
STILL Contain's opinion's & fact's that may offend !!!
:



2012 GTP 213 black what was I thinking? NOW FOR SALE>>
http://www.fordforums.com.au/showthread.php?t=11439680
sbutler is offline   Reply With Quote Multi-Quote with this Post
Old 05-12-2007, 03:54 PM   #12
forcedxr6
Regular Member
 
Join Date: Jul 2007
Posts: 57
Default

Hi the rears you refer to that are $640 are they the BF Turbo rears? What type of discs do they come with as im looking to uprade them.
forcedxr6 is offline   Reply With Quote Multi-Quote with this Post
Old 06-12-2007, 11:44 AM   #13
FLOORED
Race Brakes Sydney
 
FLOORED's Avatar
 
Join Date: Feb 2006
Location: SYDNEY
Posts: 3,608
Default

Quote:
Originally Posted by forcedxr6
Hi the rears you refer to that are $640 are they the BF Turbo rears? What type of discs do they come with as im looking to upgrade them.
Yes the BF XR6 or XR8 / Territory and they are the RDA rotors but we can supply the DBA as well in the 4000 series but it justs costs more.
__________________
MATTHEW PEARCE
RACE BRAKES SYDNEY = When you want it to stop

Street to track is what we expertise in

Phone 02 9609 1101

sales@racebrakessydney.com.au

www.racebrakessydney.com.au
FLOORED is offline   Reply With Quote Multi-Quote with this Post
Old 06-12-2007, 02:07 PM   #14
purefilth
Starter Motor
 
Join Date: Dec 2006
Posts: 12
Default

Are these 2 piece slotted 355mm rotors alviable as off the shelf? or are they cumstom made disks to order?
purefilth is offline   Reply With Quote Multi-Quote with this Post
Old 06-12-2007, 02:25 PM   #15
purefilth
Starter Motor
 
Join Date: Dec 2006
Posts: 12
Default

Quote:
Originally Posted by purefilth
Are these 2 piece slotted 355mm rotors alviable as off the shelf? or are they cumstom made disks to order?

Sorry my bad didnt read the 1st post properly does that mean tho if we need new disks we have to go down the 325mm disks ?
purefilth is offline   Reply With Quote Multi-Quote with this Post
Old 06-12-2007, 02:26 PM   #16
FLOORED
Race Brakes Sydney
 
FLOORED's Avatar
 
Join Date: Feb 2006
Location: SYDNEY
Posts: 3,608
Default

Quote:
Originally Posted by purefilth
Are these 2 piece slotted 355mm rotors alviable as off the shelf? or are they cumstom made disks to order?
This particular disc will have replacement rotors but is not a branded set up and will not replace the current 355mm BA rotors but these will be available next year.
__________________
MATTHEW PEARCE
RACE BRAKES SYDNEY = When you want it to stop

Street to track is what we expertise in

Phone 02 9609 1101

sales@racebrakessydney.com.au

www.racebrakessydney.com.au
FLOORED is offline   Reply With Quote Multi-Quote with this Post
Old 17-12-2007, 12:42 AM   #17
mrdamo
Starter Motor
 
Join Date: Dec 2006
Posts: 25
Default

Do you have any of these kits still?
mrdamo is offline   Reply With Quote Multi-Quote with this Post
Old 17-12-2007, 09:07 AM   #18
FLOORED
Race Brakes Sydney
 
FLOORED's Avatar
 
Join Date: Feb 2006
Location: SYDNEY
Posts: 3,608
Default

Quote:
Originally Posted by mrdamo
Do you have any of these kits still?
I have a couple left but they are $1900 each for now.If you want one before christmas let me know asap as i am putting one together now and may be able to do an extra one.
__________________
MATTHEW PEARCE
RACE BRAKES SYDNEY = When you want it to stop

Street to track is what we expertise in

Phone 02 9609 1101

sales@racebrakessydney.com.au

www.racebrakessydney.com.au
FLOORED is offline   Reply With Quote Multi-Quote with this Post
Old 17-12-2007, 05:07 PM   #19
mrdamo
Starter Motor
 
Join Date: Dec 2006
Posts: 25
Default

I dont need it until march next year so whenever you get time to put a kit together.

Can you please do me a price for this kit and the 328mm rear kit with everything thats needed and postage to perth.

Thanks
Damo
mrdamo is offline   Reply With Quote Multi-Quote with this Post
Old 18-12-2007, 11:23 AM   #20
FLOORED
Race Brakes Sydney
 
FLOORED's Avatar
 
Join Date: Feb 2006
Location: SYDNEY
Posts: 3,608
Default

Quote:
Originally Posted by mrdamo
I dont need it until march next year so whenever you get time to put a kit together.

Can you please do me a price for this kit and the 328mm rear kit with everything thats needed and postage to perth.

Thanks
Damo
Front kit is $1900
Rear kit is $600 with slotted rotors and plain calipers.

We can paint them but it is extra and because we do not have the exact same paint colour there will be minimal difference in the red caliper front to back.
Braided rear hoses are available and can be quoted on with the exact car details.We sell without the rear lines as we have had some customers actually being able to use there existing lines but ford did change the lines many times over the years so it is possible they also may not fit.
Freight to Perth is between $80 to $100 depending on weight and insurance is also advisable to at about $40.00
__________________
MATTHEW PEARCE
RACE BRAKES SYDNEY = When you want it to stop

Street to track is what we expertise in

Phone 02 9609 1101

sales@racebrakessydney.com.au

www.racebrakessydney.com.au
FLOORED is offline   Reply With Quote Multi-Quote with this Post
Old 18-12-2007, 03:58 PM   #21
mrdamo
Starter Motor
 
Join Date: Dec 2006
Posts: 25
Default

Thanks mate. Do you have some more details on the rear disk setup?
mrdamo is offline   Reply With Quote Multi-Quote with this Post
Old 18-12-2007, 04:11 PM   #22
FLOORED
Race Brakes Sydney
 
FLOORED's Avatar
 
Join Date: Feb 2006
Location: SYDNEY
Posts: 3,608
Default

Quote:
Originally Posted by mrdamo
Thanks mate. Do you have some more details on the rear disk setup?
Single piston caliper with a 328 x 26mm vented and slotted disc rotor
__________________
MATTHEW PEARCE
RACE BRAKES SYDNEY = When you want it to stop

Street to track is what we expertise in

Phone 02 9609 1101

sales@racebrakessydney.com.au

www.racebrakessydney.com.au
FLOORED is offline   Reply With Quote Multi-Quote with this Post
Old 20-12-2007, 05:15 PM   #23
FLOORED
Race Brakes Sydney
 
FLOORED's Avatar
 
Join Date: Feb 2006
Location: SYDNEY
Posts: 3,608
Default

These Kits At This Price Have Now Gone As We Have No More Of These Rotors Left.new Prices For The Two Piece Kits Will Be Available And Listed Early Next Year.one Piece Rotors In These Kits Are Also Still Available.
__________________
MATTHEW PEARCE
RACE BRAKES SYDNEY = When you want it to stop

Street to track is what we expertise in

Phone 02 9609 1101

sales@racebrakessydney.com.au

www.racebrakessydney.com.au
FLOORED is offline   Reply With Quote Multi-Quote with this Post
Old 26-01-2008, 12:16 AM   #24
makvaiiellesxr6
ef xr6
 
Join Date: Jan 2008
Location: melbourne
Posts: 1
Default

gday, ive got a ef xr6 and am currantly lookingto upgrade in my brakes. i have the 17" el gt rims. what is thebest in your opinion? i do brake a little hard at times and on the occasion my wife drives it.
makvaiiellesxr6 is offline   Reply With Quote Multi-Quote with this Post
Old 26-01-2008, 09:43 AM   #25
FLOORED
Race Brakes Sydney
 
FLOORED's Avatar
 
Join Date: Feb 2006
Location: SYDNEY
Posts: 3,608
Default

Quote:
Originally Posted by makvaiiellesxr6
gday, ive got a ef xr6 and am currantly lookingto upgrade in my brakes. i have the 17" el gt rims. what is thebest in your opinion? i do brake a little hard at times and on the occasion my wife drives it.
Apart from slotted rotors and better pads and perhaps braided lines you would have to go up to a twin piston caliper on a 330mm rotor.The kit we can do is about $2200 and is a very good upgrade and has been featured in Street Fords on the Street Fords EB project car.Exchange uprights with new ball joints and all brake components are supplied with braided lines and slotted rotors included.
__________________
MATTHEW PEARCE
RACE BRAKES SYDNEY = When you want it to stop

Street to track is what we expertise in

Phone 02 9609 1101

sales@racebrakessydney.com.au

www.racebrakessydney.com.au
FLOORED is offline   Reply With Quote Multi-Quote with this Post
Old 26-01-2008, 01:48 PM   #26
CAT600
I miss my wheelbarrow
Donating Member3
 
CAT600's Avatar
 
Join Date: Jan 2005
Location: Bluestreak Performance
Posts: 11,506
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always willing to help out fellow AFF members... Technical Contributor: For members who share their technical expertise. - Issue reason: Daniels knowledge of modular engines and superchargers is extremely valuable to the AFF community. I have learnt quite a bit just reading his build threads. His contributions are often utilised by other members. 
Default

Quote:
Originally Posted by FLOORED
Rear kit is $600 with slotted rotors and plain calipers.
I would like to buy this kit but it would have to fit an AU IRS rear with the EXACT same offsets as the factory pieces

Daniel
CAT600 is offline   Reply With Quote Multi-Quote with this Post
Old 01-09-2008, 11:14 AM   #27
Cobra
Bear with a sore head
 
Cobra's Avatar
 
Join Date: Dec 2004
Location: Adelaide
Posts: 3,697
Default

So what's the price of the kit with 355 two-piece rotors up front, 328mm rotors down back with painted calipers and braided lines all round? I'm thinking around $3,000 would safely cover the lot sent to Adelaide?
Cobra is offline   Reply With Quote Multi-Quote with this Post
Old 01-09-2008, 01:31 PM   #28
FLOORED
Race Brakes Sydney
 
FLOORED's Avatar
 
Join Date: Feb 2006
Location: SYDNEY
Posts: 3,608
Default

Quote:
Originally Posted by Cobra
So what's the price of the kit with 355 two-piece rotors up front, 328mm rotors down back with painted calipers and braided lines all round? I'm thinking around $3,000 would safely cover the lot sent to Adelaide?

That kit has all sold.We only had 10 kits back then in 2007 for that price and they are all gone.The kit with a 1 piece 355mm disc is $1950 but i was about to see if i could do a deal and get the prices down.If you have the BA or BF does the car have traction control or not ? With DBA rotors and red rear calipers the price would be over the $3000 mark and more if you take insurance out.If your interested let me know and i will see if i can put a package together for you.
__________________
MATTHEW PEARCE
RACE BRAKES SYDNEY = When you want it to stop

Street to track is what we expertise in

Phone 02 9609 1101

sales@racebrakessydney.com.au

www.racebrakessydney.com.au
FLOORED is offline   Reply With Quote Multi-Quote with this Post
Old 03-09-2008, 12:35 PM   #29
Cobra
Bear with a sore head
 
Cobra's Avatar
 
Join Date: Dec 2004
Location: Adelaide
Posts: 3,697
Default

Thanks FLOORED. No we just got rid of our BA and probably won't get another BA/BF until next year some time. When we do get one I want to get the brakes sorted ASAP as the stock ones are rubbish, especially on BA. I will check your area for future packages you may make available. Once again thanks.
Cobra is offline   Reply With Quote Multi-Quote with this Post
Old 03-09-2008, 01:09 PM   #30
FLOORED
Race Brakes Sydney
 
FLOORED's Avatar
 
Join Date: Feb 2006
Location: SYDNEY
Posts: 3,608
Default

Quote:
Originally Posted by Cobra
Thanks FLOORED. No we just got rid of our BA and probably won't get another BA/BF until next year some time. When we do get one I want to get the brakes sorted ASAP as the stock ones are rubbish, especially on BA. I will check your area for future packages you may make available. Once again thanks.
No worries at all and when you get it all sorted just email or PM me as i often have things happening with kits on and off.
__________________
MATTHEW PEARCE
RACE BRAKES SYDNEY = When you want it to stop

Street to track is what we expertise in

Phone 02 9609 1101

sales@racebrakessydney.com.au

www.racebrakessydney.com.au
FLOORED is offline   Reply With Quote Multi-Quote with this Post
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 04:36 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL