Raptor supercharger for AU XR8 - Page 3

XH5LWEPN · 07-09-2010, 11:30 PM

Quote:

Originally Posted by Windsor220

Well considering people are getting mid 13s with the 220s with bolt ons, a 13.4 doesnt seem all that great.

Was that 13.4 a perfect run?.............
The list of questions will never end.
Cant judge from one persons quarter mile run.

Windsor220 · 08-09-2010, 12:12 AM

Quote:

Originally Posted by XH5LWEPN

Was that 13.4 a perfect run?.............
The list of questions will never end.
Cant judge from one persons quarter mile run.

Yeah I know it just said he'd been down a few times and that was his best. Hard to find much quarter mile information on blown AU V8s.

ArTeesT · 08-09-2010, 11:10 AM

hard to find... Its almost impossible.

We all know that all cars and drivers are different but would be a good indication to find out what these blown au v8's are running down the strip and this particular car we know has only had a few minor mods to it.

sleeper393 · 08-09-2010, 05:23 PM

dont know if this has been seen, sorry if it has-
http://www.youtube.com/watch?v=-n7QUD78N6c

http://www.youtube.com/watch?v=bIajHATfPQE&NR=1

XR23IL · 15-09-2010, 12:11 AM

Quote:

Originally Posted by ArTeesT

XR23IL Have you had a chance to take it down the qtr yet and are you still running the generic tune?

I should receive my SC kit in the next few days, its going into an ED with a 200kw AU XR motor and a fair few other mods.

Cheers

yeah ran at WSID on the 1-9-10 1st time ever at the strip and it showed 14.021. was running with a **** set of 17's which wouldn't even put of a puff of smoke (been of the ute for 2 yrs in the shed) couldn't get the launch right with some very sad 60ft times clutch mostly. still carrying spare, hard top and sound system. only got 2 consistent runs. will be back down soonish with new clutch and probably drop the lid and get some better tyres. i am pretty sure tim was telling me about yours. should be good and look forward to hearing how it goes.

XH5LWEPN · 15-09-2010, 12:57 AM

What sort of MPH and 60ft times were ya hitting?

ArTeesT · 16-09-2010, 10:41 AM

Not too bad for your first time, mid 13 no worries, I got my kit in, just waiting for my tune a BPT now, Should have it up and running properly by the 1st of October.

womble101 · 16-09-2010, 04:21 PM

Quite intrested also, was it much hassel getting it to pass emisions in WA?

ArTeesT · 17-09-2010, 12:13 AM

not worried about that, pretty sure my car wouldn't have passed pre blower. Cross that bridge when i get there

XR23IL · 21-09-2010, 07:29 PM

Quote:

Originally Posted by XH5LWEPN

What sort of MPH and 60ft times were ya hitting?

60ft time of 2.284 and a top mph of 103.77

XH5LWEPN · 21-09-2010, 08:31 PM

Ah plenty of room for improvement in that 60ft. MPH is nice and strong too, 13's are only around the corner!!!

XR23IL · 21-09-2010, 08:55 PM

Quote:

Originally Posted by XH5LWEPN

Ah plenty of room for improvement in that 60ft. MPH is nice and strong too, 13's are only around the corner!!!

hope so all fun and games but

Lukeyson · 22-09-2010, 12:02 AM

i would be keen on this kit, but my XR8 it just on 180'000, i would prob have to rebuild the auto before strapping something like that on?

ArTeesT · 22-09-2010, 09:57 PM

Quote:

Originally Posted by Lukeyson

i would be keen on this kit, but my XR8 it just on 180'000, i would prob have to rebuild the auto before strapping something like that on?

As long as the engine is healthy, not blowing smoke, good compression then it shouldn't be a problem.

POELWYK · 23-09-2010, 10:49 AM

anyone used one on there 6 any probs did u have to do bottem end work!??

Noddy · 23-09-2010, 11:13 AM

I am also keen to see results with this setup.

Are they a simple exercise to intercool?

XRCIST · 23-09-2010, 11:49 AM

Quote:

Originally Posted by POELWYK

anyone used one on there 6 any probs did u have to do bottem end work!??

Shav has a Raptor kit on his AU 6, stock bottom end. His is intercooled and from what i remember is making 205rwkw.

There are also a few Bseries owners with Raptor Superchargers aswell, one XR6 recently ran 13.04 non intercooled with 233rwkw.

POELWYK · 23-09-2010, 12:18 PM

thanks hmmm still thinking about doing this

blueoval · 23-09-2010, 03:51 PM

Quote:

Originally Posted by XRCIST

Shav has a Raptor kit on his AU 6, stock bottom end. His is intercooled and from what i remember is making 205rwkw.

There are also a few Bseries owners with Raptor Superchargers aswell, one XR6 recently ran 13.04 non intercooled with 233rwkw.

Thanks mate. Im still using my old 2.5" exhaust with that out put. My guess is I would see another 10-15rwkw with a 3" system and another custom tune.

POELWYK - you should be fine mate with your engine. Alternatively look at the snort twin screw setup they have going. I have heard of up to 230rwkw unintercooled on an AU 6 with one of these kits as well as instant power from idle.

Anyway I won't hijack this thread further about it. If you want to know anything further PM me.

GK · 24-09-2010, 11:19 AM

Quote:

Originally Posted by blueoval

POELWYK - you should be fine mate with your engine. Alternatively look at the snort twin screw setup they have going. I have heard of up to 230rwkw unintercooled on an AU 6 with one of these kits as well as instant power from idle.

Mmmmmmm isntant power from idle!

GK

blueoval · 24-09-2010, 11:32 AM

hahaha do it George, you know you want to

POELWYK · 24-09-2010, 01:54 PM

i wanna do this i dont need the whole kit though hm....... more power....... Gk do it to the sr it will be tuff :p

I can do this until next year though when im off my p's :( may the 20th

blueoval · 24-09-2010, 02:28 PM

Quote:

Originally Posted by POELWYK

i wanna do this i dont need the whole kit though hm....... more power....... Gk do it to the sr it will be tuff :p

I can do this until next year though when im off my p's :( may the 20th

I reckon start getting the parts now in anticipation of the above date you get off your P's. It will give you incentive and keep the excitement alive.

http://www.snortperformance.com/supercharger.htm
http://www.raptorsc.com.au/kits.php?id=36

GK · 25-09-2010, 12:24 PM

Quote:

Originally Posted by blueoval

hahaha do it George, you know you want to

It'd be nice, but you guys should all know by now, I'm far too sensible to do such a thing! LOL!

Quote:

Originally Posted by POELWYK

GK do it to the sr it will be tuff :p

It would certainly be that.

I came close to putting a 200 in the SR about 6 weeks ago, but the LPG advice I got from my gas mechanic put me off. He suggested keeping the windsor off a standard mixer ring, or Impco setup, but go for SVI.

I guess in the final analysis, if I had that much money to splurge, I'd simply get myself an AU 2-3 XR8 OR V8 Ghia with SVI.

I keep telling myself that I need to learn to be content with my cars for now. It works, for about 2 months or so, then I need to tell myself again! LOL!

GK

Hossy · 29-09-2010, 05:27 PM

Dam reading this thread....getting me all excited about spending money on stuff I shouldent.

Jordan_xr8 · 28-09-2011, 06:59 PM

Hey mate can you tell me how much and where he got it from?

Day-mow · 28-09-2011, 07:07 PM

lots. hahaha

just me · 06-10-2011, 09:09 PM

organised a kit from tim for my xr8 today cant wait to get it on should get the old weezer moving along a bit quicker ile post some pictures up when its all on and going cheers guys

blueoval · 07-10-2011, 11:47 AM

your gonna have a lot of fun with some boost. The sound of the mild whine the blower gives along with a v8 note.

sblythman · 07-10-2011, 09:45 PM

ive also purchased a raptor kit of tim for my au 11 xr8 hopefully i can get it all up and running before xmas