Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Focus

Reply
 
Thread Tools Display Modes
Old 19-07-2017, 10:27 PM   #1
Oldrider
Starter Motor
 
Join Date: Jun 2017
Posts: 2
Default Install rear view camera in a 2012 Focus LW

G'day,

I have a 2012 Focus LW now which does not have a rear view camera. Can I replace the original display with one from later model? The Thai built Mk2 has a rear view camera. Has anybody done this?

Does the wiring harness on the LW MK1 have the camera connection considering the cars sold in Europe and US have rear view cameras. I presume the wiring harness on all LW models would be the same.

Can I get the whole audio/GPS unit from a later model and replace it? Is the software different or is it just plug n play?

Would love to hear your experience?

Thanks, OR
Oldrider is offline   Reply With Quote Multi-Quote with this Post
Old 19-07-2017, 10:51 PM   #2
stefcio007
FF.Com.Au Hardcore
 
Join Date: Jan 2016
Location: Victoria
Posts: 653
Default Re: Install rear view camera in a 2012 Focus LW

I have an aftermarket head unit with a camera input. I did buy this camera though and wired it up with my own cables as there was no existing cable in my car. http://s.click.aliexpress.com/e/AqjQFQB
Looks OEM and is integrated into the boot release handle.

I have a 2011 LW, I know that the later model Titaniums that have a rearview camera have them separate to the boot release handle.

If you do replace the display with another OEM you need to reprogram the car to tell it you have a different one installed otherwise it will not work. You also need the radio code.

It is not just plug and plug unfortunately.
stefcio007 is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 20-07-2017, 03:10 AM   #3
Oldrider
Starter Motor
 
Join Date: Jun 2017
Posts: 2
Default Re: Install rear view camera in a 2012 Focus LW

Quote:
Originally Posted by stefcio007 View Post
I have an aftermarket head unit with a camera input. I did buy this camera though and wired it up with my own cables as there was no existing cable in my car. http://s.click.aliexpress.com/e/AqjQFQB
Looks OEM and is integrated into the boot release handle.

I have a 2011 LW, I know that the later model Titaniums that have a rearview camera have them separate to the boot release handle.

If you do replace the display with another OEM you need to reprogram the car to tell it you have a different one installed otherwise it will not work. You also need the radio code.

It is not just plug and plug unfortunately.
Thanks for the response and link.

My car is a Titanium with F/R sensors.

That unit looks schmick but from what I understand, I will also need a new aftermarket headunuit. It won't work with the OEM.

I guess the radio code and reprogramming will be at dealer discretion. So unlikely
Oldrider is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 09:10 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL