Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > AU Falcon.com.au

Reply
 
Thread Tools Display Modes
Old 14-01-2019, 08:27 AM   #1
Cav
HUGH JARSE
Donating Member2
 
Cav's Avatar
 
Join Date: May 2005
Location: Yap-Hoon
Posts: 20,959
Default The black plastic thingy mystery

Can anyone enlighten me on what this black plastic thingy does?

My guess is that it stabilises the AU at speed.

Cav is offline   Reply With Quote Multi-Quote with this Post
Old 14-01-2019, 12:39 PM   #2
aussiblue
FG XR6 Ute & Sedan
Donating Member3
 
Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 22,300
Technical Contributor: For members who share their technical expertise. - Issue reason: Has been floating around the oze tech section for a long time and is always there to give advice when people have an issue. 
Default Re: The black plastic thingy mystery

Bumper apron or valance. As they say at: https://www.carid.com/articles/what-...r-valance.html
Quote:
In some cases, valance panels don't enhance aerodynamics at all. They might be simple cover pieces that conceal areas below the level of the bumper (or bumper cover) that would otherwise be exposed. In the front, this would effectively cover and protect the lower part of the radiator. more details on - https://www.carid.com/articles/what-...r-valance.html
I think the bolded bit is mostly what it does although the air flow might be untidier without it.
__________________
regards Blue
aussiblue is offline   Reply With Quote Multi-Quote with this Post
Old 14-01-2019, 01:07 PM   #3
Peter B - CV8
FF.Com.Au Hardcore
 
Join Date: Sep 2005
Posts: 1,355
Default Re: The black plastic thingy mystery

Is that on the trailing edge of the wheel arch ??? If so, it's probably just a glorified rain/dust spat that utilises the disrupted air flow to keep crap away from the side of the car.
Peter B - CV8 is offline   Reply With Quote Multi-Quote with this Post
Old 14-01-2019, 01:11 PM   #4
Cav
HUGH JARSE
Donating Member2
 
Cav's Avatar
 
Join Date: May 2005
Location: Yap-Hoon
Posts: 20,959
Default Re: The black plastic thingy mystery

I assumed from the pic I posted that it would be clear as to where on the AU the 'thingy' is located.

These are on the front mudguards.
Cav is offline   Reply With Quote Multi-Quote with this Post
Old 14-01-2019, 01:19 PM   #5
Cav
HUGH JARSE
Donating Member2
 
Cav's Avatar
 
Join Date: May 2005
Location: Yap-Hoon
Posts: 20,959
Default Re: The black plastic thingy mystery

I think these are better pics to show their size and location on the front mudguards



Cav is offline   Reply With Quote Multi-Quote with this Post
Old 14-01-2019, 01:21 PM   #6
aussiblue
FG XR6 Ute & Sedan
Donating Member3
 
Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 22,300
Technical Contributor: For members who share their technical expertise. - Issue reason: Has been floating around the oze tech section for a long time and is always there to give advice when people have an issue. 
Default Re: The black plastic thingy mystery

Quote:
I assumed from the pic I posted that it would be clear as to where on the AU the 'thingy' is located.

These are on the front mudguards.
Sorry no I though it was a pic under the front. OK spats to stop mud and dirt covering the bodywork to rear of wheels. Edit: Ok sen the new pis; those spats are aerodynamic; see https://www.youtube.com/watch?v=TCzfWgPKbbQ for how they work generally.
__________________
regards Blue
aussiblue is offline   Reply With Quote Multi-Quote with this Post
Old 14-01-2019, 01:25 PM   #7
Raptor
^^^^^^^^
Donating Member2
 
Raptor's Avatar
 
Join Date: Jan 2005
Location: online - duh
Posts: 9,628
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: For quietly going about moderating in a fair and even manner. 
Default Re: The black plastic thingy mystery

Hardly a mystery, unless you live under a rock or are a flat-earther or something

They are to satisfy ADR requirements wrt wheel coverage (as you well know).

Also found on many imports, until discerning owners rip the ugly things off

Why they would be required on an AU Falcon/Fairmont/Fairlane etc (solely designed for the domestic market) makes you wonder if the designers had ever consulted the local regulations

AU's




.
__________________
.
'93 XG Falcon Ute( sold ) : '94 ED Falcon Classic ( sold ) : '04 Territory SX TS ( sold ) : '04 Falcon RTV BAII ute (still in the family)

Last edited by Raptor; 14-01-2019 at 01:32 PM.
Raptor is offline   Reply With Quote Multi-Quote with this Post
8 users like this post:
Old 14-01-2019, 01:31 PM   #8
aussiblue
FG XR6 Ute & Sedan
Donating Member3
 
Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 22,300
Technical Contributor: For members who share their technical expertise. - Issue reason: Has been floating around the oze tech section for a long time and is always there to give advice when people have an issue. 
Default Re: The black plastic thingy mystery

But they are also still there to keep the bodywork clean especially if they are aftermarket rather than factory e.g. https://www.adamesh.co.uk/jaguar-x15...ats-4721-p.asp
__________________
regards Blue
aussiblue is offline   Reply With Quote Multi-Quote with this Post
Old 14-01-2019, 01:37 PM   #9
Cav
HUGH JARSE
Donating Member2
 
Cav's Avatar
 
Join Date: May 2005
Location: Yap-Hoon
Posts: 20,959
Default Re: The black plastic thingy mystery

Thanks Raptor but I have my doubts.

The hint is in the design - see how they are formed to slice through the air?

I did a search, but I came up empty. Maybe I missed something.

A comparison of airflow would settle it once and for all.
Cav is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 14-01-2019, 02:01 PM   #10
superroo
You can't stop the signal
 
superroo's Avatar
 
Join Date: Nov 2005
Location: Behind a computer at work
Posts: 1,625
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Has done quite a few excellent write ups for au .com 
Default Re: The black plastic thingy mystery

What Raptor said.
My memory says added on AU2 onward.
Still see them on many imports.

As to why my guess is late regulation change or unknown implementation.
With where they are it would knock into the guards and the front bumper to change. Too much tooling money when the small add on fixes it.
__________________
Quote:
Originally Posted by Matt Brown
I own a Dodge Viper and a minivan, and if I could only keep one of them, it would be the minivan
superroo is offline   Reply With Quote Multi-Quote with this Post
2 users like this post:
Old 14-01-2019, 02:34 PM   #11
Silver Ghia
Moderator
Donating Member3
 
Silver Ghia's Avatar
 
Join Date: Jun 2006
Location: Foothills of the Macedon Ranges
Posts: 18,430
Technical Contributor: For members who share their technical expertise. - Issue reason: As Silver Ghia his contributions to the AU and BA technical areas have been of high quality and valuable to the member base. 
Default Re: The black plastic thingy mystery

Quote:
Originally Posted by superroo View Post
What Raptor said.
My memory says added on AU2 onward.
Still see them on many imports.

As to why my guess is late regulation change or unknown implementation.
With where they are it would knock into the guards and the front bumper to change. Too much tooling money when the small add on fixes it.
My thoughts is because the wheels and tyres got larger with later variants of the AU, a styling trend that probably wasn't anticipated in the original design. My 1998 AU Fairmont wheels were only 15 inch which would have legally tucked into the guard.
Silver Ghia is offline   Reply With Quote Multi-Quote with this Post
2 users like this post:
Old 14-01-2019, 02:37 PM   #12
whitelion65
FF.Com.Au Hardcore
 
whitelion65's Avatar
 
Join Date: Apr 2012
Posts: 951
Default Re: The black plastic thingy mystery

Quote:
Originally Posted by Cav View Post
I assumed from the pic I posted that it would be clear as to where on the AU the 'thingy' is located.

These are on the front mudguards.

Sorry Cav,
I thought you'd left the lens cap in the way.....again ;-)
__________________
Steve
Current rides
2012 Mondeo Titanium wagon (TDCI)
Moondust silver
2016 Focus Trend, 1.5ecoboost, 6sp manual.
Frozen white

Previous
2004 Berlina Wagon (LS1) Vespers Blue
1995 Camry 2.2, white
1971 Ford Fairmont wagon 302w, C4 Polar white
1971 TC Cortina, 2L 4sp, Ermine white
whitelion65 is offline   Reply With Quote Multi-Quote with this Post
3 users like this post:
Old 14-01-2019, 02:53 PM   #13
Cav
HUGH JARSE
Donating Member2
 
Cav's Avatar
 
Join Date: May 2005
Location: Yap-Hoon
Posts: 20,959
Default Re: The black plastic thingy mystery

Quote:
Originally Posted by whitelion65 View Post
Sorry Cav,
I thought you'd left the lens cap in the way.....again ;-)
Cav is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 14-01-2019, 03:22 PM   #14
aussiblue
FG XR6 Ute & Sedan
Donating Member3
 
Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 22,300
Technical Contributor: For members who share their technical expertise. - Issue reason: Has been floating around the oze tech section for a long time and is always there to give advice when people have an issue. 
Default Re: The black plastic thingy mystery

Nah; their real secret purpose is to trap water between them and the guards to promote rust so you have to buy a new Falcon earlier than otherwise may have been the case.
__________________
regards Blue
aussiblue is offline   Reply With Quote Multi-Quote with this Post
3 users like this post:
Old 14-01-2019, 06:31 PM   #15
Tickford.
🚫⏰4️⃣🐃💩
 
Tickford.'s Avatar
 
Join Date: Sep 2012
Posts: 1,905
Default Re: The black plastic thingy mystery

Quote:
Originally Posted by Raptor View Post
They are to satisfy ADR requirements wrt wheel coverage (as you well know).
Raptor is 100% correct.

It was added to satisfy ADR regulations after a design oversight by FoMoCo Australia. You will find these "black plastic things" on ALL AU's (AU1, AU2 and AU3) fitted with the 17" (or 18") Tickford wheels and suspension (either optioned or standard fitment) and 235 wide tyres. Wasn't just a AU2/AU3 thing either. AU1 Tickford cars such as the XR's and T-Series had them. Even a AU1 Forte would have them if it was optioned up with 17" Tickford wheels and suspension.

The quick and simple explanation is, when the 17" or 18" wheels with 235 tyres were fitted to the AU, the front edge of the wheel and tyre were slightly visible from a direct top view, making the vehicle uncompliant to ADR's. A quick solution was designed and implemented by using these "plastic thingy's".

Wonder how many AU's that came factory fitted with 17"/18" wheels and 235 wide tyres still have them on? There would be many AU's out there that have had them come off, or removed by now. Making them non-compliant to ADR's.

Again, not a rain deflector, nothing to do with dust, aero, or slicing through the air, etc. The AU was a simple car. Please don't overcomplicate it.

edit: Read through this thread from the start.... oh boy....

Last edited by Tickford.; 14-01-2019 at 06:50 PM.
Tickford. is offline   Reply With Quote Multi-Quote with this Post
2 users like this post:
Old 14-01-2019, 07:01 PM   #16
Cav
HUGH JARSE
Donating Member2
 
Cav's Avatar
 
Join Date: May 2005
Location: Yap-Hoon
Posts: 20,959
Default Re: The black plastic thingy mystery

So, are youse blokes saying that if the plastic thingies on 17 inch AUs (and above) are missing then it is a fail for roadworthy?
Cav is offline   Reply With Quote Multi-Quote with this Post
Old 14-01-2019, 09:08 PM   #17
Raptor
^^^^^^^^
Donating Member2
 
Raptor's Avatar
 
Join Date: Jan 2005
Location: online - duh
Posts: 9,628
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: For quietly going about moderating in a fair and even manner. 
Default Re: The black plastic thingy mystery

Quote:
Originally Posted by Cav View Post
So, are youse blokes saying that if the plastic thingies on 17 inch AUs (and above) are missing then it is a fail for roadworthy?
Only if it's still at stock (4wd like) ride height and everything is in good original condition as per the LLBP brigade.

If like most old Falcons the front springs will have sagged, the balljoints are going and the bushes are stuffed. This fail safe will have the front end adopting some negative camber and the tops of the tyres should be tucked under the guards no probs



.
__________________
.
'93 XG Falcon Ute( sold ) : '94 ED Falcon Classic ( sold ) : '04 Territory SX TS ( sold ) : '04 Falcon RTV BAII ute (still in the family)
Raptor is offline   Reply With Quote Multi-Quote with this Post
6 users like this post:
Old 14-01-2019, 09:08 PM   #18
Beastie
The Terrain Tamer
Donating Member3
 
Beastie's Avatar
 
Join Date: May 2013
Posts: 35,941
Community Builder: In recognition of those who have helped build the AFF community. - Issue reason: Catering services for a bunch of layabouts and for being an all-round good guy whose sense of community goes above and beyond. 
Default Re: The black plastic thingy mystery

It's a leaf deflector...
__________________
Current Ride : A Ford owned D3...
Beastie is offline   Reply With Quote Multi-Quote with this Post
2 users like this post:
Old 14-01-2019, 10:20 PM   #19
Cav
HUGH JARSE
Donating Member2
 
Cav's Avatar
 
Join Date: May 2005
Location: Yap-Hoon
Posts: 20,959
Default Re: The black plastic thingy mystery

Quote:
Originally Posted by Beastie View Post
It's a leaf deflector...
I think I will leaf that comment alone.
Cav is offline   Reply With Quote Multi-Quote with this Post
3 users like this post:
Old 14-01-2019, 10:26 PM   #20
Cav
HUGH JARSE
Donating Member2
 
Cav's Avatar
 
Join Date: May 2005
Location: Yap-Hoon
Posts: 20,959
Default Re: The black plastic thingy mystery

Quote:
Originally Posted by Raptor View Post
Only if it's still at stock (4wd like) ride height and everything is in good original condition as per the LLBP brigade.

If like most old Falcons the front springs will have sagged, the balljoints are going and the bushes are stuffed. This fail safe will have the front end adopting some negative camber and the tops of the tyres should be tucked under the guards no probs
.
I think you are making it up.

Even if the top were tucked in as you say, what about the bottom?

Surely as you say the 'black thingy' is to meet design rules, then the bottom of the tyre will still protrude as much as it ever did.

I think you have a closed mind on this Raptor and are unwilling to look at credible alternatives such as wind deflection.

If what you profess, that the 'black thingy' is needed to meet Australian design rules, then those AUs with 17 inch or larger wheels must be defective. No?

Except for the ones with stuffed suspension.
Cav is offline   Reply With Quote Multi-Quote with this Post
Old 14-01-2019, 10:39 PM   #21
GasoLane
Former BTIKD
Donating Member2
 
GasoLane's Avatar
 
Join Date: Mar 2005
Location: Sunny Downtown Wagga Wagga. NSW.
Posts: 53,233
Default Re: The black plastic thingy mystery

Could it be an aerodynamic design to help lift the front to compensate for overweight drivers?
__________________
Dying at your job is natures way of saying that you're in the wrong line of work.
GasoLane is offline   Reply With Quote Multi-Quote with this Post
6 users like this post:
Old 14-01-2019, 11:47 PM   #22
Beastie
The Terrain Tamer
Donating Member3
 
Beastie's Avatar
 
Join Date: May 2013
Posts: 35,941
Community Builder: In recognition of those who have helped build the AFF community. - Issue reason: Catering services for a bunch of layabouts and for being an all-round good guy whose sense of community goes above and beyond. 
Default Re: The black plastic thingy mystery

Quote:
Originally Posted by GasOLane View Post
Could it be an aerodynamic design to help lift the front to compensate for overweight drivers?
Good point, but in this case it would only need to be on the drivers side...

Was it an optional extra...
__________________
Current Ride : A Ford owned D3...
Beastie is offline   Reply With Quote Multi-Quote with this Post
5 users like this post:
Old 14-01-2019, 11:53 PM   #23
Captain Stubing
Looking for clues...
Donating Member3
 
Captain Stubing's Avatar
 
Join Date: Jan 2005
Location: Morayfield
Posts: 22,617
Default Re: The black plastic thingy mystery

Perhaps it was a stiffener, to strengthen the guard for when portly gentlemen owners non-nonchalantly lean against it, while telling of how they managed to acquire their fine steed.
__________________
Swanny’s Fundraiser for the 2024 MS Brissie to the Bay 100km Bike Ride



2016 Ford Falcon FG/X XR6 Turbo you beaut ute
1985 XR4Ti Sierra - Build Thread
1971 Fairlane 500
and... a collection of Jeep Towpigs
and... two collections of rust and some new plastic bits roughly shaped like an F-Truck
and.... some spare metal bits with holes in them

@GasoLane;
Captain Stubing is offline   Reply With Quote Multi-Quote with this Post
7 users like this post:
Old 15-01-2019, 06:56 AM   #24
Cav
HUGH JARSE
Donating Member2
 
Cav's Avatar
 
Join Date: May 2005
Location: Yap-Hoon
Posts: 20,959
Default Re: The black plastic thingy mystery

It certainly is a weighty issue folks.
Cav is offline   Reply With Quote Multi-Quote with this Post
3 users like this post:
Old 15-01-2019, 01:37 PM   #25
aussiblue
FG XR6 Ute & Sedan
Donating Member3
 
Join Date: Oct 2006
Location: Bibra Lake WA
Posts: 22,300
Technical Contributor: For members who share their technical expertise. - Issue reason: Has been floating around the oze tech section for a long time and is always there to give advice when people have an issue. 
Default Re: The black plastic thingy mystery

I always thought black plastic thingies were always battery operated, rocket shaped and it was forbidden to ask what they were for.
__________________
regards Blue
aussiblue is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 15-01-2019, 01:49 PM   #26
superroo
You can't stop the signal
 
superroo's Avatar
 
Join Date: Nov 2005
Location: Behind a computer at work
Posts: 1,625
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Has done quite a few excellent write ups for au .com 
Default Re: The black plastic thingy mystery

Quote:
Originally Posted by Cav View Post
So, are youse blokes saying that if the plastic thingies on 17 inch AUs (and above) are missing then it is a fail for roadworthy?
No. Roadworthy check does not cover all area's of ADR's.
For roadworthy, my memory says top portion of tyre tread must be under guard from above. Hence stretched tyres are legal.

Best example is on exhausts. ADR has static & drive by noise levels.
Road worthy only cares about static test, hence can be louder.
__________________
Quote:
Originally Posted by Matt Brown
I own a Dodge Viper and a minivan, and if I could only keep one of them, it would be the minivan

Last edited by superroo; 15-01-2019 at 01:54 PM.
superroo is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 15-01-2019, 02:07 PM   #27
Cav
HUGH JARSE
Donating Member2
 
Cav's Avatar
 
Join Date: May 2005
Location: Yap-Hoon
Posts: 20,959
Default Re: The black plastic thingy mystery

Quote:
Originally Posted by aussiblue View Post
I always thought black plastic thingies were always battery operated, rocket shaped and it was forbidden to ask what they were for.
You're a naughty boy AB
Cav is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 15-01-2019, 02:08 PM   #28
Cav
HUGH JARSE
Donating Member2
 
Cav's Avatar
 
Join Date: May 2005
Location: Yap-Hoon
Posts: 20,959
Default Re: The black plastic thingy mystery

Quote:
Originally Posted by superroo View Post
No. Roadworthy check does not cover all area's of ADR's.
For roadworthy, my memory says top portion of tyre tread must be under guard from above. Hence stretched tyres are legal.

Best example is on exhausts. ADR has static & drive by noise levels.
Road worthy only cares about static test, hence can be louder.
So no yellow canary from Mr Plod?
Cav is offline   Reply With Quote Multi-Quote with this Post
Old 15-01-2019, 11:34 PM   #29
superroo
You can't stop the signal
 
superroo's Avatar
 
Join Date: Nov 2005
Location: Behind a computer at work
Posts: 1,625
Tech Writer: Recognition for the technical writers of AFF - Issue reason: Has done quite a few excellent write ups for au .com 
Default Re: The black plastic thingy mystery

You're good.
Reading below there is some ambiguity in the roadworthy (VSI), but general consensus I'm aware of is when viewed from above

ADR 42
Quote:
42.12.1.2.1.
The wheel guards must meet the following requirements when the wheels are in the straight ahead position:

42.12.1.2.1.1.
In the part formed by radial planes at an angle of 30 degrees to the front and 50 degrees to the rear of the centre of the wheel (see figure 1), the overall width (q) of the wheel guards must be at least sufficient to cover the tyre ‘section width’ (b) of the tyres fitted to the vehicle taking into account the extremes of tyre/wheel combination as specified by the ‘manufacturer’

42.12.1.2.1.3.1.
The projection - situated in the vertical plane of the tyre axis - of the depth (p) of the outer edge of the wheel guards, measured in the vertical longitudinal plane passing through the centre of the tyre, must be at least 30 mm. This depth (p) may be reduced progressively to zero at the radial planes specified in clause 42.12.1.2.1.1
Vic Roads VSI 8
Quote:
..and, when in the straight ahead position, the guard or bodywork of the vehicle must cover the section width of the tyre
Note - The section width of a tyre is the distance between the outsides of the sidewalls of an inflated tyre excluding any markings, bands or ribs.
__________________
Quote:
Originally Posted by Matt Brown
I own a Dodge Viper and a minivan, and if I could only keep one of them, it would be the minivan

Last edited by superroo; 15-01-2019 at 11:42 PM.
superroo is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 16-01-2019, 07:41 AM   #30
Uncle_Ken
Next upgraded Mk1 Leopard
Donating Member1
 
Uncle_Ken's Avatar
 
Join Date: Jan 2005
Location: Sydney, in the burbs
Posts: 4,899
Valued Contributor: For members whose non technical contributions are worthy of recognition. - Issue reason: Always putting some imput into the forums to help or make it a bit easier for others Tech Writer: Recognition for the technical writers of AFF - Issue reason: Writing tech articles 
Default Re: The black plastic thingy mystery

Quote:
Originally Posted by Uncle_Ken View Post
Well I've been busy doing 'stuff' of late.
But I did buy a set of AU wheel arch for a UTE.
As they are currently reddish, I put one on BMC's AU to have a look.


.

.


UK
Au Utes had these as an option
UK
__________________
Plastic Surgery 1 AUII Monsoon Blue
Plastic Surgery 2 AUIII XR8 220 Rebel
Plastic Surgery 3 Watch this space ??? Living in AU Heaven
How 2's: Change rear view mirror, Install backfire valve, Change foam front seats, Install auto transmission cooler, Replace Trans Shift Globe, Remove front door Trim, Paint AU headlights, install door spears, Premium Rear Parcel Shelf, go here...
Uncle_Ken is offline   Reply With Quote Multi-Quote with this Post
3 users like this post:
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 06:57 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL