ABS and ESP light is on (2010 LV Focus)

[rodo]

Hi all
Front right ABS wire to the hub had rubbed thru the insulation and broken the wire
Both the ABS and ESP lights are on - faulty wire so they should be on
I've repaired the wire with a 400mm section from a wrecker car - Soldered joints - insulated and heat shrink over the soldered connection area
The ABS and ESP lights are still on after the repair
I've plugged in an OBDII scanner to check / clear the code - there are none
Question 1 Will it show on OBDII scanners or is another scanner required
Question 2 Will it go away (reset itself) after xx amount of starts
I've pulled the ABS fuse and relay and started the car (not driven anywhere)
turned it off - plugged them back in - lights still on
On a road test (60-KPH) and standing on the brake pedal it pulls up with no shudder on the pedal and it doesn't lock a wheel - so assuming ABS is working
There is a about 50 words in the owner's handbook about ESP
It says SET/RESET - not sure if this will fix it or not
Having trouble getting into the Main Menu to then progress to this option