|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
27-08-2007, 10:18 PM
|
#1 | ||
|
Starter Motor
Join Date: Jul 2007
Posts: 10
|
Well back again,
This time car won't start (click click click ) so bought a new battery and made no difference. So I'm thinking "starter motor" what do you think  : If it is ? Where's the best place to buy one. Should I go 2nd hand ? Or new ? Cheers Dash. I'm in Berwick Vic. |
||
|
|
|
03-09-2007, 02:15 PM
|
#2 | ||
|
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
reconditioned starters are ok from auto electricians
new ones have a 2 yr warranty depends on how long you want to keep your car
__________________
My car goes Brumm Brumm |
||
|
|
|
|
17-09-2007, 01:17 AM
|
#3 | ||
|
Piston Broke
Join Date: Sep 2007
Location: Tasmania
Posts: 12
|
Check your wiring just in case you have a bad earth to the engine block. Also check your positive cable to the starter motor solenoid in case there is corrosion on the connection.
 :
|
||
|
|
|
|
08-10-2008, 10:24 AM
|
#4 | ||
|
Starter Motor
Join Date: Apr 2008
Location: melbourne
Posts: 2
|
I had the same problem and took my starter motor of and had the brushes checked and all was ok-mine was not starting when hot-so i checked my wiring harness and found it was getting old-to solve this problem i by-passed the main harness from the ignition to the starter motor with a relay that i fitted onto the firewall and have had no probs since-i had trouble finding starters as mine was a bosch which they dont do for these anymore.
|
||
|
|
|
|
13-10-2008, 09:58 AM
|
#5 | ||
|
290v
Join Date: Feb 2007
Location: Adelaide
Posts: 1,218
|
KC KE early model Lasers had an ignition problem ( Common Fault) the contacts inside wore out and also the starter solinoid wire i had to replace the connector on the wire
__________________
BA GT 2003 Silhouette 4 Speed Auto |
||
|
|
|
starting prob's
Wiring issue?
Linear Mode
