|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
20-01-2007, 03:55 PM
|
#1 | ||
|
Regular Member
Join Date: Jan 2007
Posts: 51
|
After degreasing the engine the speedo went erratic and has now stopped. used to work fine when car warmed up after 30 min running. definatley a result of water. Hold light is flashing and there is no odometer either. Have dried out most connectors however can't find where the wiring travels to the gearbox. Have taken out battery and Air filter box to get a better look. Car is running fine. Any ideas appreciated
|
||
|
|
|
21-01-2007, 10:14 AM
|
#2 | ||
|
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
if the dash is digital there will be a sender where a speedo cable would be fitted into the gearbox if it were analog
__________________
My car goes Brumm Brumm |
||
|
|
|
AX TX5 2 litre Speedo problems
Linear Mode
