Green Ford Badge - Page 4

Pieoter · 22-06-2006, 09:42 PM

I used to have those blue bulbs and they lasted about 3months (both blew within 5minutes of each other) and ive been using the stock ones for over 2years now those bastards don't keep shining

kenneth_lks · 23-06-2006, 12:02 AM

LOL, I'm using a pair of 5000k superwhite halogen bulbs that imported from Japan (unknown brand coz can't read Japanese), and costed only AU$45 which has been used for up to 1 1/2 year..

Fled74 · 23-06-2006, 01:18 AM

I was toying with the idea of using blue bulbs in my turn signals and side repeaters... probably illegal though, as blue light is supposedly the least visible colour of the spectrum.

I was in Geelong on Wednesday and I saw a red WP Zetec Fez (no stripes) around noon on Malop Street (I think it was Malop... the one that passes in front of Myer). Didn't get a good look at the driver though. Then 20 minutes later as i was leaving Geelong I saw a white WQ Zetec near the Ford plant. Didn't see the driver either.
Were any of you out and about at that time?

Pieoter · 23-06-2006, 02:13 AM

For turn signal u MUST have orange light. Anything else is illegal

Danny · 23-06-2006, 01:36 PM

Quote:

Originally Posted by Flederschwein

I was toying with the idea of using blue bulbs in my turn signals and side repeaters... probably illegal though, as blue light is supposedly the least visible colour of the spectrum.

I was in Geelong on Wednesday and I saw a red WP Zetec Fez (no stripes) around noon on Malop Street (I think it was Malop... the one that passes in front of Myer). Didn't get a good look at the driver though. Then 20 minutes later as i was leaving Geelong I saw a white WQ Zetec near the Ford plant. Didn't see the driver either.
Were any of you out and about at that time?

Nah, I would have been on the Westgate freeway on the way to Geelong at that time on wednesday.

Swaytan · 23-06-2006, 05:51 PM

Ok, got my green Ford badges from Grafico today, they look awesome, very eye catching, will post pics soon...

photn · 26-06-2006, 08:07 PM

hey guys, just wanna know any1 knoe anyone local in sydney that could apply the stripes on the car, i have the stripes already,(oredered from ebay) but i just need to put them on, i have both kinds, the viper ones and the side st ones. any ideas.

Swaytan · 26-06-2006, 08:52 PM

Quote:

Originally Posted by photn

hey guys, just wanna know any1 knoe anyone local in sydney that could apply the stripes on the car, i have the stripes already,(oredered from ebay) but i just need to put them on, i have both kinds, the viper ones and the side st ones. any ideas.

Hey there, can't help ya I'm sorry, I guess any spray painter would be able to do it. Don't know if they'd be able to guarantee the work though...

grafico · 26-06-2006, 09:09 PM

Contact a local sign writer, or someone who specialises in Vehicle wraps/ signage. Anyone in that industry will be able to help.

Otherwise you can pay for me to come to Sydney and i'll do them for you :-)
I preffer to stay at the Hyatt if possible ... hehehehe

Sonia · 27-06-2006, 06:53 PM

ooer... I use to work at the Hyatt.... but in Melb. Very swish ;)

Danny · 28-06-2006, 02:40 PM

You WOULLD like to stay at the Hyatt Damian. If you pay for grafico to come to sydney, dont forget to organise from Europcar the Hiring of a Ssangyong Chairman. Or failing that, A Kia Optima lol. Hahah.

I want to go too seeing as how I know how to help as well lol, Its a 2 man job.

LethalLeigh · 28-06-2006, 08:08 PM

I swear the Ssangyong Chairman needs to come in only one colour, Commie Red!

Swaytan · 29-06-2006, 09:53 PM

Attn Grafico:

How would the ST stripe kit differ on the WQ Fiesta instead of the WP?

I'm gonna place the order for a stripe kit as soon as they're ready, but just wanna double check they are also available for the WQ Fez.

Cheers!

Danny · 29-06-2006, 11:11 PM

Theres no difference to the sheet metal on the WQ so Id imagine for the tailgate roof and bonnet its the same. However the front and rear bumpers differ a little so i'd imagine thats where the stripe templates would differ.

grafico · 02-07-2006, 07:25 PM

Hi, The kits are pre cut stripes but the edges you just cut to suit, so it wouldn't be a problem if there was a little extra or less on the bumpers etc.

Kits are ready to go, so just let me know!

Swaytan · 02-07-2006, 09:22 PM

Quote:

Originally Posted by grafico

Hi, The kits are pre cut stripes but the edges you just cut to suit, so it wouldn't be a problem if there was a little extra or less on the bumpers etc.

Kits are ready to go, so just let me know!

Awesome! And the price of the kit? Would I be able to get one in the same green as the badge I got from ya'll?

grafico · 05-07-2006, 09:01 PM

Hi, yes that flouro green can be made, however would cost a little more as the vinyl price is higher. If you would like to go ahead let me know and i'll get a price.

dAmian

photn · 05-07-2006, 10:17 PM

hi graphico, what spacing did you use between the 2 stripes. i used 1.5 cm. and how much would a 2 metre piece of grade 9 vinyl in white cost me to get sent to me here in NSW, also what template did u use to cut around the ford badg???e

nash777 · 14-07-2006, 03:37 PM

[QUOTE=Nappa]

Quote:

Originally Posted by Looks like you are the first in Melb to do so. Congrats.[/QUOTE

im afraid someone else has beaten him to it, theres a black lx 3dr WP that gets around burwood, it has massive green stripes that are outlined by thin white stipes. it actually look really mad but the guy still has steel weels on it.

that's me! haven't we all been busy.. good to see.

i havent checked the forum for ****ing ages. stillhaven't seen any of you guys on the road at all.

i did my stripes without any templates. (just automotive vinyl and a blade!)

the color is not green its Metalic Bronze with white outlines, and different to the ST design. total cost?....... $72 and a whole day of trial and error hahah ;)

ill post something for those who havent seen it

nash777 · 14-07-2006, 06:47 PM

EstaFiesta · 14-07-2006, 11:40 PM

Hi, just tought I would weigh into this foray.

I bought the stripes from Ford UK, genuine items. I got a local guy to fit them. He only charged me $100.00 (cashie job..) to fit them. He did a fantastic job. This included the ST side stripes as well as the front bumper, bonnet, roof, tailgate and rear bumber stripes. Gotta be happy with that.

Yeah, they only go half way over the front and rear bumbers, bur good old Ford Europe designed the bumpers to be compatible with the ST150's. I think they look spot on, exactly as intended.

If you are in Perth, PM me and I will give you his dtls.

Go the Esta!

Simon

p.s. will update pic as soon as new WQ rims on....

Danny · 15-07-2006, 12:59 AM

Quote:

Originally Posted by nash777

Hey Nash, I saw your car at Chapel Street one night out the front of Frostbites. The stripes look good, but my only gripe wouldbe what you've done with the headlights and back windows. It's not to my taste but eh, each to their own..

nash777 · 15-07-2006, 03:45 AM

Quote:

Originally Posted by Danny

Hey Nash, I saw your car at Chapel Street one night out the front of Frostbites. The stripes look good, but my only gripe wouldbe what you've done with the headlights and back windows. It's not to my taste but eh, each to their own..

damm that was about 5 months ago.. yeah the fiesta headlights are WAY to big.. cute little animals have BIG eyes.. im not into it or people being able to see in... hahah 100% black!!

All the cars are looking good. great to see ;)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode