2007 Turbo Territory needed

[FLOORED]

I was wondering if anyone in Sydney has a 2007 Turbo Terri that i could borrow for an hour or so this week so i can check the fitting of a Brembo brake kit thanks.

[05_ENFORCER]

You could try this in the Territory section also Matt

[FLOORED]

Originally Posted by 05_ENFORCER

You could try this in the Territory section also Matt

Yeah i should i just wasn't sure if i was allowed.

[Raptor]

Copy of thread placed in the Territory section for you Matt

Check there for offers as well.

Cheers, Rob

[Headsex]

Hi Floored. Did the brembo brakes fit behind the standard turbo territory wheels?

[FLOORED]

Originally Posted by Headsex

Hi Floored. Did the brembo brakes fit behind the standard turbo territory wheels?

I can't confirm they do sorry as we were so focused on the fitment and any fouling on the stub axle that we didn't check the wheel clearance.

[05_ENFORCER]

No, unfortunately they do not.
You will need to use the F6X wheels or find some 20 plus units.



.

[Headsex]

Cheers guys..

Is it the bulky fat offset of the caliper, or the combined diameter of the disk and caliper that fouls?

Because my second question is, i know Racebrakes Syd has a adaptor to space the caliper out to suit a 355mm disk(my friend has this kit on his XR6). would this fit?

[05_ENFORCER]

Originally Posted by Headsex

Cheers guys..

Is it the bulky fat offset of the caliper, or the combined diameter of the disk and caliper that fouls? The standard TTG wheel is "thicker" in the spokes

Because my second question is, i know Racebrakes Syd has a adaptor to space the caliper out to suit a 355mm disk(my friend has this kit on his XR6). would this fit?

Can't do, would be worse. Can't go in either, it hits on the upright.

No other way around it mate. Been there, done that, with the help of Matt from Race Brakes Sydney, of course.

[Headsex]

Thanks..

What is your TTG brake setup? clearly guessing you have F6X or, other larger rims also

[05_ENFORCER]

I have the TTG with F6X rims and the RBS 6/4 Brembo setup.
The brakes have been on and off the car around 6-7 times trying to work out how to fit them properly.
The only way to get these to fit is to grind the stub mounting hole lug/s and use F6X rims or 20+ rims.

[Headsex]

Well it looks like i'm going to have to find me some rims now

Car pulls up alright, but im coming due to replace disks/pads.. got a slight shutter as well.

[05_ENFORCER]

For what it's worth unless you brake extra hard "normally" like me, save your dosh and go for some DBA disks and some competition pads.

The standard stoppers are fine.

PM Matt from RBS (FLOORED) he'll sort you out.

OR, I'll sell you my Brembos and F6X rims

[FLOORED]

Originally Posted by 05_ENFORCER

I have the TTG with F6X rims and the RBS 6/4 Brembo setup.
The brakes have been on and off the car around 6-7 times trying to work out how to fit them properly.
The only way to get these to fit is to grind the stub mounting hole lug/s and use F6X rims or 20+ rims.

What he said

From all the info we have gathered from the TTG and the F6X the knuckle where one of the bolts goes through to mount the caliper bracket has to be ground flat a couple of mm's for the caliper body to clear.If you look at a F6X knuckle you can see where it has been done.

[Headsex]

Nice.. Well thanks alot for all your help. I'll look for wheels first

[05_ENFORCER]

eBay is your friend there buddy