Yep done this to two cars now.It is quite easy but time consuming job.
The drivers door has 5 or 6 wires {key less or not** the rest only have two wires.
Have plenty of time as this is going to take about 6 hours alone depending if you got keyless or not.
Start with enough time and take all the door skins off off just take your time so you don't break any clips.I used a large screw driver on a couple of the skins to lever right beside where the clipps attach to the doors.
You have to see how the locking mechanism works on both back and front doors when you sus that you have to get actuator mounted so it pulls and pushes the locking rod without binding.
One final tip super glue all the screws that clamp the actuator rods to the locking rod.
Good luck
__________________
Ambrose driving in Nascar and joining RPM Murphy somewhere in the V8'S.
XR6 Turbo.Championship winner.
|