View Single Post
Old 06-06-2016, 02:59 PM   #7
rondeo
FF.Com.Au Hardcore
 
Join Date: Mar 2013
Posts: 805
Default Re: Powershift data logs and P0715

On the ground fluid level check:

Warm up the car.
Park on a level surface.
Connect to Forscan and check temp is between 35 and 45 deg.
Go through the gears, 20 sec each.
Raise LH front and remove wheel.
Lower the car to a stand (level).
Place container under level check plug.
Remove air filter housing.
Remove filler plug.
Remove level check plug (2ft ext. handy).
Allow check bore to drain to a drip.
Add fluid in 250ml lots until flow becomes a drip.
Replace plugs etc.

This check should only be necessary if there are doubts about the gbox performance, or the fluid is being changed.

I found the most annoying thing is removing the airbox.

I'm planning to get rid of this annoyance by using a custom made funnel .....

Last edited by rondeo; 06-06-2016 at 03:19 PM. Reason: corrections
rondeo is offline   Reply With Quote
This user likes this post: