Quote:
Originally Posted by TruBlu351
I've got 4085's (1 7/8) on my 225's and there's about 3-5mm gap between the steering box....in an XD. I'd like that one culprit pipe cut and recessed in about 10mm.
I think the 4095's are the 2" off the shelf. Any extractors with a 4V flange should fit the 3V raised exhaust port.
Got 436rwhp on his Dyno.....couldn't fit the AFR probe up my exhaust dumpers though ;) ..........so still need to tweek the carby.
|
The problem I have is that the
4V extractors, except rubbing is that the port has a agressive angle for the exhaust gas to flow.
I have been told by Franky at Dandy Engines that our combo's require 2" or 2 1/8" primary.