Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Ford Australia Vehicles > Small and Mid Sized Cars > Escort, Cortina, Sierra and Capri

Reply
 
Thread Tools Display Modes
Old 12-02-2008, 08:23 PM   #1
1 dvs 4d
Regular Member
 
1 dvs 4d's Avatar
 
Join Date: Feb 2006
Location: Claremont Meadows NSW
Posts: 83
Default V6 Tc Cortina's

I have read somewhere that Ford brought some TC's in from South Africa with the 3lt v6 in them for evaluation prior to launching the TC 6 cylinder. I do remember one at Summernats a while back with NSW plates VEE 600 but other than that nothing.
Does anyone have any info???

__________________
ED XR6 Polynesian Green JMM DEV 3HL/5 kit *sold*
EL 5LTR Ghia Argon Silver slammed cruiser *sold*
BA UTE daily workhorse
ED XR6 Cobalt Blue Project Car
1 dvs 4d is offline   Reply With Quote Multi-Quote with this Post
Old 12-02-2008, 08:26 PM   #2
wodahs
FF.Com.Au Hardcore
 
wodahs's Avatar
 
Join Date: Nov 2005
Location: perth
Posts: 4,355
Default

dont know about that but i do know that an older capri came with a v6 maybe it was the same motor
if some one can shed some light ?
__________________
yes still (as money n time permit) doing the

rebuilding the zh fairlane with a clevo 400m 4v heads injected whipple blown with aode 4 speed trans to a 9" ....... we'll get there eventually

just remember don't be afraid to try something new.
Remember, amateurs built the Ark...Professionals built the Titanic!

I have taken up meditation... at least it's better than sitting around doing nothing !!
wodahs is offline   Reply With Quote Multi-Quote with this Post
Old 13-02-2008, 02:55 PM   #3
outback_ute
Ute Forum Moderator
Contributing Member
 
outback_ute's Avatar
 
Join Date: Dec 2004
Location: Melb
Posts: 7,227
Default

I remember reading about one, not sure if it was a private import or not though. You are right wodahs, it would have been the Essex V6, ahthough in Germany they would have been built with the Cologne V6 as well.
outback_ute is offline   Reply With Quote Multi-Quote with this Post
Old 13-02-2008, 07:54 PM   #4
benny_mac
FF.Com.Au Hardcore
 
benny_mac's Avatar
 
Join Date: Apr 2005
Location: Adelaide, SA (down South)
Posts: 623
Default

I know they have granada's(which are basically british cortina's) which had the colonge 2.8 v6. maybe one was imported.
__________________
New Project: 1980 MK2 Escort Panel Van, 2lt, auto
Soon to be painted running a 4.0ltr v6
See the build here
http://www.fordforums.com.au/showthread.php?t=11388068

You Have Freedom of Speech Just Choose to Remain Silent
benny_mac is offline   Reply With Quote Multi-Quote with this Post
Old 14-02-2008, 09:07 AM   #5
whooligan
FF.Com.Au Hardcore
 
whooligan's Avatar
 
Join Date: Dec 2005
Posts: 556
Default

The South Africans used both the 3.0lt and 2.5lt V6 Essex engines in their TC Cortinas. There was one in a street machine years ago...purple with pink rocker covers (very 70's)
The cologne V6 is a very different motor to the Essex forund in Capris, but some later TE/TF (Mk4&5) Cortinas had 2.3lt colognes fitted with C3 autos in Europe....Mainly wagons.
The V6 Essex was available as a conversion through a UK tuner named Jeff Uren. They were badged as a "Savage Cortina." He also did 2.0lt Escorts in the early 70's a few years before Ford got around to it in 1974.
Granadas were sold along side the Cortinas in Britain. They were in-btwen the Cortina and Falcon in terms of size, although the Falcon was never sold in Europe.
whooligan is offline   Reply With Quote Multi-Quote with this Post
Old 18-02-2008, 10:11 PM   #6
1 dvs 4d
Regular Member
 
1 dvs 4d's Avatar
 
Join Date: Feb 2006
Location: Claremont Meadows NSW
Posts: 83
Default

Thanks for the info Guys. If I can track one of these or a straight 4.1 litre TE down I'll be a happy man
__________________
ED XR6 Polynesian Green JMM DEV 3HL/5 kit *sold*
EL 5LTR Ghia Argon Silver slammed cruiser *sold*
BA UTE daily workhorse
ED XR6 Cobalt Blue Project Car
1 dvs 4d is offline   Reply With Quote Multi-Quote with this Post
Old 19-02-2008, 02:42 PM   #7
Jim5_0
FF.Com.Au Hardcore
 
Join Date: Feb 2005
Location: Canberra region
Posts: 775
Default

I remember seeing that TC V6 in a Street machine magazine a few years ago.

The bonnet differed from any other Cortina that I have seen in that the raised centre section is a lot higher than a standard bonnet. Very much in the same way that all Aussie TE and TF Cortina's have a higher centre section to their bonnet than their equivalent MK4 and MK5 brethren thus not needing the TC/TD bulge to clear the air cleaner on the 6 cylinder versions.
Jim5_0 is offline   Reply With Quote Multi-Quote with this Post
Old 21-02-2008, 12:42 PM   #8
ayamisu
Starter Motor
 
Join Date: Jan 2008
Posts: 4
Default

There was also a mk2 cortina with a v6 essex motor in it.
the tc td cortinas also had the same motor as well as imports...
I have an escort fitted witha v6 essex in it, it is a tight fit but you should be able to make it fit in the corty alot easier than i got it in the eski.
ayamisu is offline   Reply With Quote Multi-Quote with this Post
Old 21-02-2008, 06:58 PM   #9
1 dvs 4d
Regular Member
 
1 dvs 4d's Avatar
 
Join Date: Feb 2006
Location: Claremont Meadows NSW
Posts: 83
Default

The mk2's are the Cortina Savage aren't they.
If anyone has any info on the South African Cortina's could they drop me a line
Cheers guys
__________________
ED XR6 Polynesian Green JMM DEV 3HL/5 kit *sold*
EL 5LTR Ghia Argon Silver slammed cruiser *sold*
BA UTE daily workhorse
ED XR6 Cobalt Blue Project Car
1 dvs 4d is offline   Reply With Quote Multi-Quote with this Post
Old 21-02-2008, 08:41 PM   #10
PIG250
Regular Member
 
PIG250's Avatar
 
Join Date: Oct 2007
Location: Adelaide
Posts: 107
Default

Quote:
Originally Posted by Jim5_0
I remember seeing that TC V6 in a Street machine magazine a few years ago.

The bonnet differed from any other Cortina that I have seen in that the raised centre section is a lot higher than a standard bonnet. Very much in the same way that all Aussie TE and TF Cortina's have a higher centre section to their bonnet than their equivalent MK4 and MK5 brethren thus not needing the TC/TD bulge to clear the air cleaner on the 6 cylinder versions.

They also have a round fuel filler, whereas we have rectangle ones.
PIG250 is offline   Reply With Quote Multi-Quote with this Post
Old 22-02-2008, 10:17 PM   #11
ayamisu
Starter Motor
 
Join Date: Jan 2008
Posts: 4
Default

there is a cortina manual not sure which one but is does go into detail about the SAVAGE.
i did read a copie i borrowed about 2 yrs ago off a mate in the car club but he has since moved on.
ayamisu is offline   Reply With Quote Multi-Quote with this Post
Old 22-02-2008, 10:20 PM   #12
ayamisu
Starter Motor
 
Join Date: Jan 2008
Posts: 4
Default

Also forgot to say the raised section on the cortina mentioned i think is from choice and not a factory or needed option as my eski all i have is my airfilter out of the bonnet and only because i chose to and the rest is under bonnet and im running a holley with a high rise manifold too
ayamisu is offline   Reply With Quote Multi-Quote with this Post
Old 23-02-2008, 10:57 AM   #13
1 dvs 4d
Regular Member
 
1 dvs 4d's Avatar
 
Join Date: Feb 2006
Location: Claremont Meadows NSW
Posts: 83
Default

The TC and TD Cortina's had the bulge in the bonnet to clear the 6 cylinder rocker cover and air cleaner. The four still had the flat bonnet. All aussie TE and TF's had the raised centre of the bonnet regardless of engine capacity. I'll have to watch my dvd again to see if the english cars had it or not

The savage was a limited run of mk2's fitted with v69's by an english tuner again i'll have to watch my dvd again to get the full story.

If anyone knows the whereabouts of the pastel blue VEE 600 NSW rego'd TC v6 that was at Summernats in 92. Could they let me know
__________________
ED XR6 Polynesian Green JMM DEV 3HL/5 kit *sold*
EL 5LTR Ghia Argon Silver slammed cruiser *sold*
BA UTE daily workhorse
ED XR6 Cobalt Blue Project Car
1 dvs 4d is offline   Reply With Quote Multi-Quote with this Post
Old 27-02-2008, 10:43 AM   #14
Jim5_0
FF.Com.Au Hardcore
 
Join Date: Feb 2005
Location: Canberra region
Posts: 775
Default

Quote:
Originally Posted by 1 dvs 4d
All aussie TE and TF's had the raised centre of the bonnet regardless of engine capacity. I'll have to watch my dvd again to see if the English cars had it or not
The English ones had the raised centre to the bonnet but it's nowhere near as high as it is on Aussie TE/TF's. The MK4 and MK5 bonnet also has a slight line down the centre of the bonnet running front to back whereas the TE/TF does not. You have to catch this in the right light to notice it though as it is very slight.
Jim5_0 is offline   Reply With Quote Multi-Quote with this Post
Old 27-02-2008, 06:20 PM   #15
fmc351
let it burn
 
Join Date: Feb 2006
Location: QUEENSLANDER!!!!!
Posts: 2,866
Default

Quote:
Originally Posted by whooligan
Granadas were sold along side the Cortinas in Britain. They were in-btwen the Cortina and Falcon in terms of size, although the Falcon was never sold in Europe.
I recall reading somewhere here that the Fairmont GXL was available in the UK. There was a pic of one with UK plates too.
fmc351 is offline   Reply With Quote Multi-Quote with this Post
Old 27-02-2008, 08:13 PM   #16
bingoTE50
Steve
 
bingoTE50's Avatar
 
Join Date: Jun 2007
Location: Sth East Qld
Posts: 1,284
Default

There was a SA one in Campbelltown in Sydney about 6 years ago.From memory it was a blue TE shape . The guy had it for sale at a Peter Warren Ford Day in about 2002 .. All I can remember really...
bingoTE50 is offline   Reply With Quote Multi-Quote with this Post
Old 27-02-2008, 09:06 PM   #17
Jim5_0
FF.Com.Au Hardcore
 
Join Date: Feb 2005
Location: Canberra region
Posts: 775
Default

Quote:
Originally Posted by fmc351
I recall reading somewhere here that the Fairmont GXL was available in the UK. There was a pic of one with UK plates too.
Yep Fairmonts and Valiant Regals were sold in the UK in small numbers. Trouble is they cost at least as much as a Jaguar when new which would explain the small numbers.
Jim5_0 is offline   Reply With Quote Multi-Quote with this Post
Old 28-02-2008, 10:39 PM   #18
1 dvs 4d
Regular Member
 
1 dvs 4d's Avatar
 
Join Date: Feb 2006
Location: Claremont Meadows NSW
Posts: 83
Default

These cars are hard to come by, I recall the SA one back in 02 as well, but i haven't been able to get even a pic of one to start my search.
__________________
ED XR6 Polynesian Green JMM DEV 3HL/5 kit *sold*
EL 5LTR Ghia Argon Silver slammed cruiser *sold*
BA UTE daily workhorse
ED XR6 Cobalt Blue Project Car
1 dvs 4d is offline   Reply With Quote Multi-Quote with this Post
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 01:13 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL