|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
25-12-2009, 10:39 PM
|
#1 | ||
|
FF.Com.Au Hardcore
Join Date: May 2005
Posts: 1,135
|
help with engine how do i get torque settings and specs related to this engine online for free? ax Telstar V6 5 speed? repair guides etc
|
||
|
|
|
26-12-2009, 03:40 PM
|
#2 | ||
|
FF.Com.Au Hardcore
Join Date: May 2005
Posts: 1,135
|
BUMP any experts in the building?
|
||
|
|
|
|
26-12-2009, 03:52 PM
|
#3 | ||
|
Clevo Mafia Inc.
 
Join Date: Dec 2004
Location: Melbourne
Posts: 10,496
 
|
I don't recall the Telstar ever having 6 cylinders in Australia.
http://en.wikipedia.org/wiki/Ford_Telstar |
||
|
|
|
|
26-12-2009, 04:01 PM
|
#4 | ||
|
Now Fordless
Join Date: Aug 2005
Location: Fremantle, WA
Posts: 3,611
|
Telstar definitely had a V6. 2.5l same as the Probe. That wiki says only in NZ which is wrong.
Probably going to be difficult to find a complete database for a car like this as they arent that common. Best to just spend some coin on a manual from Repco or similar place. |
||
|
|
|
|
26-12-2009, 04:41 PM
|
#5 | ||
|
Fordaholic
Join Date: Apr 2008
Location: Brisbane
Posts: 884
|
It is the KL motor that Mazda put in the 626 should be an all alloy motor if it is I can supply big End, Mains, & Head bolt torque.
Cyl Head: 1st step 23-26nm 2nd step tighten to 90 degrees 3step tighten a further 90 degrees Big ends: 1st step tighten to 22-27nm 2nd step tighten to 90 degrees Mains: Eight inner bolts, 23-26nm Eight outer bolts, 18-21 nm. Number 4 inner bolts (4 stamped on bolt head) tighten to 80 degrees. The remainder of the inner bolts ( 1 stamped on the head)Tighten to 70 degrees. Eight outer bolts, tighten to 60 degrees Please use this information carefully as it is supplied to you through datatek cheers. |
||
|
|
|
|
26-12-2009, 05:14 PM
|
#6 | ||
|
Regular Member
Join Date: Mar 2008
Posts: 459
|
|
||
|
|
|
|
27-12-2009, 02:56 AM
|
#7 | ||
|
FF.Com.Au Hardcore
Join Date: May 2005
Posts: 1,135
|
Legendary stuff. Cheers.
|
||
|
|
|
ford v6
Linear Mode
