Welcome to the Australian Ford Forums forum.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact us.
Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.
||Thread Tools||Display Modes|
|07-08-2019, 12:13 PM||#1|
Join Date: Aug 2007
Tried searching for thread would not work.
Low km -33k 2014 focus has a rough idle.
Any help please
|07-08-2019, 05:27 PM||#3|
Join Date: Jul 2011
Location: Mandurah W.A.
Check for vacuum leaks around the inlet manifold , spray throttle body cleaner around the manifold flange and associated parts to see if the engine picks up in revs at idle.
If it does then you need to pin point were the leak is .
IE the inlet gasket to head , injector O ring etc
XC GS THE LAST OF THE OLD SCHOOL MUSCLE
BA falcon dedicated gas
xc falcon 500 ,250 x flow 3 speed
xc gs worked 250 x flow 4 speed
xa Fairmont 302 auto wagon
xb falcon 250 log auto 4 door
xb falcon 200 log auto ute
xc gs project - had to sell :-(
xc gs 302 4 speed 4 door
xc gs 351 auto 4 door
zf fairlane 302 auto
zk fairlane 250 x flow carb auto
zl fairlane 250 x flow EFI auto
xd, xf x 3 ,ea,eb,ef,au x 3,telstar tx5
|07-08-2019, 05:39 PM||#4|
Join Date: Mar 2013
Check for collapsed engine mount (the one under the coolant reservoir). You can tell if there is any rub marks between the bottom of the rubber and the top of the lower aluminium housing. if there's rub marks, its collapsed.
Has this vehicle had a clutch replaced? If so could also be that the clutch mounts to the flywheel have not been torqued up to the right torque and in the right sequence.
Also check spark plugs and coils.