|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
11-08-2013, 02:05 PM
|
#1 | ||
|
Starter Motor
Join Date: Jun 2013
Posts: 23
|
Hey there fellow forum people, just got my 86 Tx3 back on the road after a long hiatus of 8 years, found that the speedo is not showing driving speed or distance travelled, however when im in first gear and put my foot down the needle moves and bumps around, i have a small bit of understanding on how the unit works, can the disk loose its magnetism.???.
Just about to go out and check the cable is connected to the back of the cluster and to the gearbox also.! I only gather that it is due to the needle movement Cheers Dan |
||
|
|
|
11-08-2013, 04:42 PM
|
#2 | ||
|
Starter Motor
Join Date: Jun 2013
Posts: 23
|
never mind, found that the clutch cable was not fixed against the gearbox, with a bit of work being done in behind there i had given the speedo cable enough of a shunt to pop off the cluster connection, can't have been on proper in the first place. Prob solved
 
|
||
|
|
|
Speedo not registering
Linear Mode
