|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
10-08-2010, 02:22 PM
|
#1 | ||
|
Regular Member
Join Date: Feb 2007
Posts: 82
|
Hi All.
I'm in the process of dismantling my doors, and I've noticed a couple of door hinge pins missing. I thought that while the doors are apart, I might as well take them off & clean the hinge assemblies etc. I was wondering if anyone can give me any tips on removing the intact door hinges? I can't see any obvious starting point for getting them out. |
||
|
|
|
11-08-2010, 12:27 PM
|
#2 | ||
|
Starter Motor
Join Date: Mar 2009
Posts: 3
|
If you remove the centre pillar trims in a 4 door you will find the 13mm nuts that hold the hinge on and if you remove the front inner kick trim the nuts are also in there for the front door and up high behind the dash panel inside the door pillar you will find the top nuts
Jim |
||
|
|
|
|
12-08-2010, 02:15 PM
|
#3 | ||
|
Regular Member
Join Date: Feb 2007
Posts: 82
|
Thanks Jim.
|
||
|
|
|
|
14-06-2015, 07:18 AM
|
#4 | ||
|
Starter Motor
Join Date: Dec 2014
Posts: 2
|
Hi, Can anybody help me with how to repair worn escort mk1 hinges. thanks
|
||
|
|
|
|
14-06-2015, 12:00 PM
|
#5 | ||
|
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
Ekkie.... stop asking hard questions
 you may be able to find the hinge pin this ebayer has a lot of mark I doors so may have hinges ? http://www.ebay.com.au/itm/Ford-Mk1-...item3ce7aa5dfe the australian ford escort parts supplier we used to use closed up shop source of a new hinge would be the UK possibly
__________________
My car goes Brumm Brumm Last edited by dirty hands; 14-06-2015 at 12:08 PM. |
||
|
|
|
|
15-06-2015, 12:32 AM
|
#6 | ||
|
FF.Com.Au Hardcore
Join Date: Dec 2012
Location: Adelaide
Posts: 2,251
|
Or use 8mm bolts and nylocks like I have. makes future removal that much easier.
Unless the hinge itself has worn oval or oversized then its a bit harder but try running a 9mm ream through them and 9mm bolt. JP |
||
|
|
|
| This user likes this post: |
|
10-09-2015, 10:42 AM
|
#7 | ||
|
Starter Motor
Join Date: Dec 2014
Posts: 2
|
Hi, Thanks for your help. It is the holes that are slotted so guess I'll go for the 9mm bolt idea. Thanks again.
|
||
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Getting doors of a Mk 2 Escort
Linear Mode
