Hard to get bits Wanted or For Sale - Page 5

XB74GS · 24-07-2008, 05:37 PM

Quote:

Originally Posted by georgevlah

I'm after a set of XB GT flutes for rear quarters. Must be VGC with intact pins. Any help would be much appreciated

Sorry can't help you there.
Todd.

Pinkbits · 24-07-2008, 06:46 PM

Quote:

Originally Posted by XB74GS

Wanted - 351 guard badges in good to excellent condition.
- Single rail gear knob, also in good to excellent condition.

May be able to arrange parts swap as I have quite a collection laying around.
Thanks
Todd.

Are toploader & single rail gear knobs the same? I can't remember.
Anyway, found this.
http://cgi.ebay.com.au/FORD-FALCON-G...QQcmdZViewItem

XBROO · 24-07-2008, 08:32 PM

No reverse would be in the wrong spot.

Big Mike · 24-07-2008, 09:43 PM

Reverse is NW not SW, other than that the white is thinner, duller, I suppose worn relative to that but I haven't cleaned it up - no cracks or anything silly. I'll give it a scrub and see what comes up. I know the black is deep and glossy just like that ebay link.

RAREV8 · 24-07-2008, 10:54 PM

Quote:

Originally Posted by Big Mike

Reverse is NW not SW, other than that the white is thinner, duller, I suppose worn relative to that but I haven't cleaned it up - no cracks or anything silly. I'll give it a scrub and see what comes up. I know the black is deep and glossy just like that ebay link.

Don't polish your Knob too much....no matter how much XB74GS wants you too!

:

XB74GS · 25-07-2008, 08:24 PM

Quote:

Originally Posted by Big Mike

Reverse is NW not SW, other than that the white is thinner, duller, I suppose worn relative to that but I haven't cleaned it up - no cracks or anything silly. I'll give it a scrub and see what comes up. I know the black is deep and glossy just like that ebay link.

Sounds good. Let me know how much you want for it, plus postage to Helensburgh NSW 2508
Thanks
Todd.

Big Mike · 27-07-2008, 09:18 PM

What's it worth? Haven't got a pic of it yet, as I didn't get to the car this weekend. Maybe $20 for instance? As for what I need - well, would that swap for a good working XB clock?

Or rear honeycomb sections in any kind of condition? So long as the honeycomb and frame is complete - I don't needs pins or paint, as my beaver is flat and I'll be painting/chroming it anyway.

XA-MONT · 27-07-2008, 09:38 PM

hey everyone, im after the stainless strip off the top of the drivers door for an XA fairmont coupe. Its the only piece of trim im missing.

Cheers,
Travis

Ozzyosko · 07-08-2008, 03:06 PM

I've just been stripping back some panels on the XB and have found that the R/H front guard is full of bog...covering bingle damage, other dents and rust. Also my R/H door has some bad splits around the 3 screws at the latch along with some more nasty rust.

Can anyone help me out in getting hold of a decent door and guard... I don't mind if the guard has minor rust in lower section, I can fix that alright.

I'm also keeping my eye out for a fluted bonnet and possibly a L/H door.

I'm in Newcastle, NSW

Cheers

Auslandau · 07-08-2008, 11:41 PM

Landau stocking hose material for sale which is extremely rare! Havnt seen it come up before. Just a shame there is only enough for one seat and it is expensive because of that reason. If someone had a roll to complete a full interior, they would be sitting on a gold mine!
http://cgi.ebay.com.au/FORD-LANDAU-L...QQcmdZViewItem

| [/url] |

bob 351 · 08-08-2008, 12:22 AM

Quote:

Originally Posted by Ozzyosko

I've just been stripping back some panels on the XB and have found that the R/H front guard is full of bog...covering bingle damage, other dents and rust. Also my R/H door has some bad splits around the 3 screws at the latch along with some more nasty rust.

Can anyone help me out in getting hold of a decent door and guard... I don't mind if the guard has minor rust in lower section, I can fix that alright.

I'm also keeping my eye out for a fluted bonnet and possibly a L/H door.

I'm in Newcastle, NSW

Cheers

i can help you with most of that stuff but transport cost would kill you

BAWITHLOT · 08-08-2008, 05:12 PM

I have a couple of XB single rail knobs with remenants of white numbers, but it depends on which style you want!

Ozzyosko · 08-08-2008, 07:23 PM

Quote:

Originally Posted by bob 351

i can help you with most of that stuff but transport cost would kill you

Cheers Bob. Yarram does seem to be miles away from anywhere...

Are you talking coupe doors or doors from your sedan projects?

XB74GS · 08-08-2008, 09:36 PM

Quote:

Originally Posted by Ozzyosko

I've just been stripping back some panels on the XB and have found that the R/H front guard is full of bog...covering bingle damage, other dents and rust. Also my R/H door has some bad splits around the 3 screws at the latch along with some more nasty rust.

Can anyone help me out in getting hold of a decent door and guard... I don't mind if the guard has minor rust in lower section, I can fix that alright.

I'm also keeping my eye out for a fluted bonnet and possibly a L/H door.

I'm in Newcastle, NSW

Cheers

Give me a call next week during business hours (02) 9642-6110.
I may be able to help you out with all that you are seeking.
I'm in Sydney.
Cheers
Todd.

Ozzyosko · 08-08-2008, 10:36 PM

Quote:

Originally Posted by XB74GS

Give me a call next week during business hours (02) 9642-6110.
I may be able to help you out with all that you are seeking.
I'm in Sydney.
Cheers
Todd.

Will do,

Thanks ,mate

bob 351 · 09-08-2008, 12:09 AM

Quote:

Originally Posted by Ozzyosko

Cheers Bob. Yarram does seem to be miles away from anywhere...

Are you talking coupe doors or doors from your sedan projects?

sorry Ozzy did not realise you where after coupe doors cant help you there

spannerman · 13-08-2008, 04:27 PM

Hi guys

I am chasing a set of front door trims in fairmont or GT pattern for a xb coupe preferance to be black but as long as they are in resonable nick I can paint them for now untill my new ones turn up all help is welcome

Thanks in addvance
Matt

Ducati888 · 18-08-2008, 01:22 PM

What's a coupe bootlid worth these days in good condition? I've never seen one come up for sale.

Thanks!

xe351 · 18-08-2008, 06:10 PM

i have a pair of tilt front seats for coupe, they are ratty, but rebuildable and might help someone out

xe351 · 18-08-2008, 06:11 PM

Quote:

Originally Posted by Ducati888

What's a coupe bootlid worth these days in good condition? I've never seen one come up for sale.

Thanks!

$200 ish ?

bob 351 · 18-08-2008, 06:23 PM

Quote:

Originally Posted by xe351

i have a pair of tilt front seats for coupe, they are ratty, but rebuildable and might help someone out

and how much would you want for these thanks bob

xe351 · 18-08-2008, 06:33 PM

not sure, give me a day and i will check them out better and clean them up (just picked them up)

Ducati888 · 21-08-2008, 02:20 PM

I need a set of black front & rear seatbelts to suit an XB Coupe, if anyone can help please let me know. Also after a black rear seat, but any colour will do really as I'm likely to get it reupholstered.

Cheers all.

RAREV8 · 27-08-2008, 05:18 PM

Has anyone got a 3.5:1 LSD diff centre for a 9" for sale? I'm not sure what the difference is as I have seen the packs for sale on ebay but unsure what is needed to match an LSD...which mine is but with 2.75:1.
Diff is making occasional clunk clunk clunks at very low speed so an overhaul may be needed, hence might as well up the ratio a bit.

Any help much appreciated and happy to ship if not in Sydney.

PM me if you can.

Cheers, Jamie

Auslandau · 11-09-2008, 11:43 PM

I know they are hard to get, especially in this condition but wow!http://cgi.ebay.com.au/Ford-L-T-D-an...QQcmdZViewItem

and http://cgi.ebay.com.au/LTD-LANDAU-TA...QQcmdZViewItem

Amazing! Glad I have a couple now

| [/url] |

cob115 · 12-09-2008, 07:45 AM

Quote:

Originally Posted by auslandau

I know they are hard to get, especially in this condition but wow!http://cgi.ebay.com.au/Ford-L-T-D-an...QQcmdZViewItem

and http://cgi.ebay.com.au/LTD-LANDAU-TA...QQcmdZViewItem

Amazing! Glad I have a couple now

jesus hows the price,i spose if you need one ,but $$$$

xacoupeking · 25-09-2008, 01:16 PM

does anyone know of anyone selling xa coupe parts because i need doors, boot ,bonnet etc.

Donny · 25-09-2008, 03:08 PM

I have a pair of spare coupe doors for an xa that are pretty reasonable. where are you located? got a bootlid too, but it needs a lot of work.

I will be going through all my surpluss xa coupe stuff soon and getting rid of anything I dont want, so stay tuned.
I know I have a spare set of stainless door top moulds left n right lying around and a few spare bonnet moulds plus tuns of large buckle seatbelts for coupes and some later retractable coupe belts too, and plenty of extra bits too. Will post them up once I go through it all.

xacoupeking · 25-09-2008, 08:06 PM

I live in ballarat how much would you want for doors and boot lid

Donny · 25-09-2008, 09:39 PM

I am in QLD, so thats going to pose a huge problem freight wise, unless you have an alternative??