Hard to get bits Wanted or For Sale - Page 11

cob115 · 18-07-2009, 05:19 PM

Quote:

Originally Posted by Pinkbits

Just got home from another 2 weeks of work in country Victoria.
The haul included;
A pair of XB coupe/ute doors in very very good cond
a ZG bonnet with very good front mould & badge
XB battery tray, wiper motor & set of Fairmont arm rests.
2 sets of h/light & wiper switches
2 V8 t/bar shifters & surrounds
pair of sedan anti lift wipers
V8 throttle cable
Option 52 rim and cap
1 worn Dunlop Aquajet
Lucas twin horns
Cigarette lighter
Heater control knobs
Various spare screws & bolts
3 "globe" screw on caps
Windscreen washer jets
The lot for $150, (and that's not a wrong keystroke)

The funny thing is, that i found it all by accident.
Just go's to show it is still out there.

top find

gcg2503 · 18-07-2009, 05:46 PM

Quote:

Originally Posted by Pinkbits

Just got home from another 2 weeks of work in country Victoria.
The haul included;
A pair of XB coupe/ute doors in very very good cond
a ZG bonnet with very good front mould & badge
XB battery tray, wiper motor & set of Fairmont arm rests.
2 sets of h/light & wiper switches
2 V8 t/bar shifters & surrounds
pair of sedan anti lift wipers
V8 throttle cable
Option 52 rim and cap
1 worn Dunlop Aquajet
Lucas twin horns
Cigarette lighter
Heater control knobs
Various spare screws & bolts
3 "globe" screw on caps
Windscreen washer jets
The lot for $150, (and that's not a wrong keystroke)

The funny thing is, that i found it all by accident.
Just go's to show it is still out there.

Please tell me you meant one option 52 wheel and cap and not a set!

Pinkbits · 18-07-2009, 06:44 PM

Quote:

Originally Posted by gcg2503

Please tell me you meant one option 52 wheel and cap and not a set!

Your suffering is over George!, only one.

:
Thank goodness for the company ute.
Would of been pushing it uphill to bring it all home in the Festiva!

grumblexr6 · 29-07-2009, 07:34 PM

Hi Guys just chasing parts for the coupe. What im after is!
*Top Mould for the front windscreen plus top corner piece's
*Passenger side Stainless steel mould holds inner door rubber
*Stainless steel pieces top of doors.
If anyone can steer me in right direction be great Thanx. Im located in Syd West

cob115 · 30-07-2009, 06:45 AM

[QUOTE=grumblexr6]Hi Guys just chasing parts for the coupe. What im after is!
*Top Mould for the front windscreen plus top corner piece's
*Passenger side Stainless steel mould holds inner door rubber
*Stainless steel pieces top of doors.
If anyone can steer me in right direction be great Thanx. Im located in Syd West[/QUOT

Howdy grumblexr6 might be easyer to get em of a sedan n makem fit (for the molds windscren)not many around cheers pat

memphis2k · 30-07-2009, 12:39 PM

Quote:

Originally Posted by grumblexr6

Hi Guys just chasing parts for the coupe. What im after is!
*Top Mould for the front windscreen plus top corner piece's
*Passenger side Stainless steel mould holds inner door rubber
*Stainless steel pieces top of doors.
If anyone can steer me in right direction be great Thanx. Im located in Syd West

I have the door stainless trims, not sure what they are worth though?

gtp292 · 30-07-2009, 07:27 PM

I have a complete front windscreen mould suit coupe spare but as said, "they are as rare as" and priced accordingly. Don't want to burst your bubble, but it took me close to 18 months to get a complete set of door moulds, front and rear. Be prepared to pay for those too, as ebay is about the only place you'll find them.

Good luck.

grumblexr6 · 31-07-2009, 11:09 PM

Thanks for the reply guys. Yea im chasing these but plus few more as trying to get Dad's cobra back on road for October

GT0090 · 01-08-2009, 04:15 PM

Guys, I'm racing against time to get my coupe ready for Echuca & in desperate need of water pump pulley for Clevo with 2V belts on crank pulley (ie Power steering, no Air Cond). I have one from Tas which were supposed to be a pair (crank & WP), but the water pump pulley sits the belt too far back & interferes with the alt bracket. Please can anyone help. Ideally I would like to pick up this week end as I've got heaps to get ready on the old girl.
Paul, 0418555146

gtxb67 · 01-08-2009, 04:22 PM

Quote:

Originally Posted by GT0090

Guys, I'm racing against time to get my coupe ready for Echuca & in desperate need of water pump pulley for Clevo with 2V belts on crank pulley (ie Power steering, no Air Cond). I have one from Tas which were supposed to be a pair (crank & WP), but the water pump pulley sits the belt too far back & interferes with the alt bracket. Please can anyone help. Ideally I would like to pick up this week end as I've got heaps to get ready on the old girl.
Paul, 0418555146

i assume the tas you mention is the state of tasmania. try tas from palace automotive in moorabbin, 9553 6066 - being an engine ancilliary i am not sure if he can help, but with the amount of coupe stuff especially and x series parts he has, he may be able to help you out

of course at this time of the weekend, it is unlikely to catch him now

xe351 · 01-08-2009, 08:42 PM

Quote:

Originally Posted by grumblexr6

Hi Guys just chasing parts for the coupe. What im after is!
*Passenger side Stainless steel mould holds inner door rubber
If anyone can steer me in right direction be great Thanx. Im located in Syd West

if you cant find one of these i may have one, the catch i cant check for a while as its stored about 250km from where i live, send me a pm if interested

JG65TE · 01-08-2009, 09:10 PM

gt0090. hey Paul, Mark here mate. Hope the pulley worked for you ??

GT0090 · 02-08-2009, 03:56 PM

Mark,
- thanks for the pulleys off the XC (with PS & AC)
- haven't had a chance to fit 'cause my mate who's housing the car for now wanted to wind up for the weekend
- problem is that it looks like the water pump pulley is the same as I already had & makes the belt sit too far back ??
- it may be that I'm thinking the belts go around the wrong pulleys:
- does anyone know for a Clevo, with NO Air Cond & with Power Steering (which has been added), where do the belts loop:
- eg belt closest to carby: crank & altenator only ?
belt closest to radiator: crank, water pump & power steering pump ?
- any pics would be appreciated

grumblexr6 · 02-08-2009, 06:17 PM

Thanx for the offer XE351 will keep in mind as found I guy last night with some spares so if falls through ill get in touch Thanks again Jon

JG65TE · 03-08-2009, 12:25 AM

I will have a look on the mrs's xc when i get home tomorrow Paul.

p.s as always if they no good to ya, bring em back and i will toss em back in with my spares.

GT0090 · 09-08-2009, 09:07 PM

Mark,
- pulley fitted fine
- I was just measuring the diameter against centres, not figuring that the water pump pulley sat behind the crank pulley !

- engine going
- off to get the diff tomorrow
- still have interior, exhaust, rear suspension & a heap of stuff to go !
- it is four or five weeks left !

GT0090 · 12-08-2009, 10:49 PM

Anyone suggest best option to refurb / restore XB Chamois Arm rests - alternatively, anyone have a car set they want to sell (if they're good nic)

Dean · 28-08-2009, 09:07 AM

Hi Guys, I am looking for a rear tailight panel for a coupe, I don't care of the condition it is in as long as the 4 ribs (next to the taillights) are not damaged. Really I only need one side of the ribs.
So if anyone is replacing there old rusty one with a repo or has one lying around and the ribs are ok please let me know.

cheers.

memphis2k · 28-08-2009, 01:44 PM

Quote:

Originally Posted by Dean

Hi Guys, I am looking for a rear tailight panel for a coupe, I don't care of the condition it is in as long as the 4 ribs (next to the taillights) are not damaged. Really I only need one side of the ribs.
So if anyone is replacing there old rusty one with a repo or has one lying around and the ribs are ok please let me know.

cheers.

Yes I have one, pay postage and ill send it to ya. (ill cut just the bit you need out)

Dean · 28-08-2009, 02:36 PM

Quote:

Originally Posted by memphis2k

Yes I have one, pay postage and ill send it to ya. (ill cut just the bit you need out)

Thanks Mate, just sent you a pm.

cheers

memphis2k · 31-08-2009, 11:39 PM

If anyone wants the leftovers from my taillight panel for rust repairs let me know, its going in the bin soon but happy to cut some chunks out, was replaced due to rust at the bottom edge, so honeycomb area, taillight areas etc are OK

All I ask is cover the postage

JG65TE · 01-09-2009, 07:54 PM

may have chamois arm rests layin here somewhere paul, did u check the 4 door ?. or in the back shed, if ya call me and im hoe i can look while u r on phone.otherwise i will forget as i am flat out trying to make mine ready as well.

fordmaddness · 02-09-2009, 10:01 PM

hey all im reasonably new to here, im looking for a glovebox latch for my xa fairmont, anyone have 1 handy? correct screws would be good to lol.... and anyone wreckin an xa sedan around brisbane?

Big Mike · 03-09-2009, 04:07 AM

Not sure a glovebox lid is at all Coupe/Hardtop specific nor "Hard to get bits" as per this thread, although I imagine any wreckers with a few old Fords will probably have one.

fordmaddness · 04-09-2009, 06:24 PM

erm i asked for a glovebox 'latch' not a lid and erm all my local wreckers dont stock anything pre late 80s. thats why i came here thankyou for all your help.

JG65TE · 04-09-2009, 06:29 PM

prolly be able to help ya out fordmaddness if you like ? if its the same is a xb one i have a few spare complete dashes here for xb, no xa tho. ?

any good to ya ?

fordmfp · 05-09-2009, 12:52 AM

Quote:

Originally Posted by fordmaddness

erm i asked for a glovebox 'latch' not a lid and erm all my local wreckers dont stock anything pre late 80s. thats why i came here thankyou for all your help.

Mate dont worry about it to much when i was new here i got talked to rudely too when i put a few things in the wrong place!! But soon enough you will put the questions in the right place and the grumpy old buggers that dont have anything else to do but moan will leave you alone

cob115 · 05-09-2009, 12:47 PM

im after ute/coupe /van doors ,xc twin head light grill ,sampson 15x8 15x10 wheels look like the jelly bean wheels thanks

DRM ON · 05-09-2009, 12:58 PM

ive got a few van doors that ide prob sell mate. in decent nick and complete. but im in wagga wagga so I dunno how much help that will be.

can I post xp coupe parts I need here? new to this part of the forum haha

fordmfp · 05-09-2009, 05:41 PM

Quote:

Originally Posted by cob115

im after ute/coupe /van doors ,xc twin head light grill ,sampson 15x8 15x10 wheels look like the jelly bean wheels thanks

Hi Pat

I have bought new wheels for my coupe so im getting rid of my 15x8 and 10 magnums, I no im in nz but im sure we could sort freight out. Otherwise there was a fully refurbished set going on ebay for about $2500 mate