Welcome to the Australian Ford Forums forum.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact us.

Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated.

Go Back   Australian Ford Forums > Club and Speciality Forums > Ford Car Clubs > New and Classic Ford Association of Australia Inc

New and Classic Ford Association of Australia Inc A Queensland based club for all Ford models of all ages of Show “n” Shine standard.

Reply
 
Thread Tools Display Modes
Old 24-06-2021, 12:02 PM   #1
eagle6052
1976 Ford ZH Marque 351
 
Join Date: Nov 2007
Location: Port Pirie South Australia
Posts: 13
Default Pacemaker extractors ZH Marque Fairlane Original Cond

1976 Ford ZH Marque Fairlane 351 FMX transmission coloum auto foot hand brake.

Has anyone fitted PH 4050 ceramic pacemaker extractors with these standard features.

Yes have contacted Pacemaker direct who were very helpful but never fitted to my model.

Asked several mechanics and exhaust businesses but no one seems to have actually fitted to my model.

I know the right hand side needs to be cut between 2 & 3 to get them in and possible remove engine mount and jack up the motor on that side.

Also I have been told the linkages and foot brake need to be modified.

I am hoping someone has a car the same as mine and has fitted extractors.

Thankyou
eagle6052 is offline   Reply With Quote Multi-Quote with this Post
Old 24-06-2021, 01:45 PM   #2
wodahs
FF.Com.Au Hardcore
 
wodahs's Avatar
 
Join Date: Nov 2005
Location: perth
Posts: 4,355
Default Re: Pacemaker extractors ZH Marque Fairlane Original Cond

pretty sure they were the pacemaker extractors i had in my ZH but it had the c4 not the fmx trans
__________________
yes still (as money n time permit) doing the

rebuilding the zh fairlane with a clevo 400m 4v heads injected whipple blown with aode 4 speed trans to a 9" ....... we'll get there eventually

just remember don't be afraid to try something new.
Remember, amateurs built the Ark...Professionals built the Titanic!

I have taken up meditation... at least it's better than sitting around doing nothing !!
wodahs is offline   Reply With Quote Multi-Quote with this Post
This user likes this post:
Old 03-07-2022, 12:50 PM   #3
eagle6052
1976 Ford ZH Marque 351
 
Join Date: Nov 2007
Location: Port Pirie South Australia
Posts: 13
Default Re: Pacemaker extractors ZH Marque Fairlane Original Cond

1976 Ford ZH Marquis Fairlane 351 2V FMX transmission.
Follow Up on fitting the Pacemaker PH 4050 extractors.
Left hand side (Passenger Side) fitted perfectly and lined up with exhaust.
Right hand side (Driver Side) fitted to engine without having to split or cut them.
NOTE:
Right hand side D.S. hung down too low needed to be 1" shorter.
Also did not line up with exhaust extractor outlet pipe wrong angle.
Cut rear bumper to match right hand side exhaust to accommodate twin exhaust.
After several modifications finally worked out OK.
Sounds great.
eagle6052 is offline   Reply With Quote Multi-Quote with this Post
Reply

Thread Tools
Display Modes

Forum Jump


All times are GMT +11. The time now is 08:08 AM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL