Hard to get bits Wanted or For Sale - Page 20

meray · 06-04-2012, 09:34 PM

I am looking to buy a pair of rear disc brake calipers to suit my 1977 P6 LTD.
If anyone can help please let me know...

gcg2503 · 06-04-2012, 09:38 PM

Quote:

Originally Posted by meray

I am looking to buy a pair of rear disc brake calipers to suit my 1977 P6 LTD.
If anyone can help please let me know...

Forum member LukeGT has them. Send him a pm

meray · 07-04-2012, 07:08 AM

I had to wait until I had 5 posts, I've now sent him a message.
Thank you

King Neptune · 22-04-2012, 09:29 PM

G'day all,
I've just listed a pair of rear side windows on ebay item No 320892662328. If anyone is interested. Obviously to suit coupe.
Cheers rob.

gcg2503 · 22-04-2012, 10:52 PM

Hey Rob
They are non-tinted windows right?
Cheers
George

King Neptune · 24-04-2012, 04:23 PM

Quote:

Originally Posted by gcg2503

Hey Rob
They are non-tinted windows right?
Cheers
George

Non tinted George.
I can deliver these, and/or anything else I list, to Melb so they can be picked up from Donvale by arangement.
Cheers rob.
ps; I did notice you at the "xabition" at the Carribean Market, but you seemed heavily involved in conversations, so I decided not to intrude.

Great day though.
Cheers.

King Neptune · 06-05-2012, 05:14 PM

G'day all,
The cleanout continues......
I have just listed;
An XB GT/GS dashboard wiring loom (harness) item 320900823976
A windsor V8 bellhousing (manual) item no 320900858605
An XB GT/GS dashboard (Not great) item 320900930205 (It has XA GT/GS Gauges insert & they are pretty good).

Also, I still have coupe rear 1/4 glass (Non tinted) PM me if interested.
Cheers Rob.

HalHal · 03-06-2012, 07:44 PM

Does anyone have a drivers side wiper arm for an XA or XB coupe?

gtxb67 · 03-06-2012, 08:15 PM

Quote:

Originally Posted by HalHal

Does anyone have a drivers side wiper arm for an XA or XB coupe?

you might already know (and they may be just as rare), but cortina ones fit. i would think any 16 inch ford windscreen wiper of the age would

HalHal · 03-06-2012, 08:18 PM

Thanks. I missed one on eBay recently. I have a sedan one on at the moment and if I can't get a good one I might try cutting it down. Have you heard of people having sucess doing that?

gtxb67 · 03-06-2012, 08:20 PM

no. could it be done - i couldn't find coupe ones years ago, so settled for some te cortina ones

King Neptune · 26-06-2012, 10:25 AM

G'day all, just listed on ebay a console. item No.320933506972
Cheers Rob.

King Neptune · 26-06-2012, 02:56 PM

G'day, I have listed more XA XB items today aswell for anyone thats interested. the cleanout continues.
Cheers Rob.

King Neptune · 28-06-2012, 06:46 PM

Kick panels too, (brown no speakers). 320934915039
Cheers rob.

lilmattie · 21-07-2012, 10:12 PM

Hi everyone,

Trying to track down some upper XA/B GT aircon radiator mounts. Please let me know if anyone has any spare.

Thanks!

darkside · 22-07-2012, 10:55 PM

Quote:

Originally Posted by HalHal

Thanks. I missed one on eBay recently. I have a sedan one on at the moment and if I can't get a good one I might try cutting it down. Have you heard of people having sucess doing that?

easy enuff but you will need a set of coupe ones to get some measurements from ,remove the pins holding the arm to the lower portion of wiper ,cut required length off drill new holes and if you dont have the correct pins to re join use stainless pop rivets .works a treat ...doc

XBCoupeNZ · 24-07-2012, 03:57 PM

Theres a roof cut on eBay at the moment if you don't have a roof

XA5800 · 24-07-2012, 09:10 PM

Hi Guys
Looking for MOROSSO Chrome rocker covers to suit cleveland & factory xa engine bay wiring loom, rear window winders coupe & have a spare rear bar for xa with mounting brackets, requires rechroming but straight
Cheers Brett

XC GXL · 26-07-2012, 05:41 PM

Quote:

Originally Posted by XA5800

Hi Guys
Looking for MOROSSO Chrome rocker covers to suit cleveland & factory xa engine bay wiring loom, rear window winders coupe & have a spare rear bar for xa with mounting brackets, requires rechroming but straight
Cheers Brett

XC GXL rear window winders are the same as coupe ones. Might widen your search a bit more mate.

Wayne

BAWITHLOT · 26-07-2012, 08:21 PM

I am after a brown coupe front large buckle seatbelt ( preferably good condition so i can send mine off for repair)!

MEANXBCOUPE · 18-09-2012, 09:32 PM

Hi.
Selling the Toploader out of my coupe.

From flywheel to output shaft, new everything, fully rebuilt, inc factory shifter + spare new speco thomas shifter (shown), speedo cable and autometer speedo to suit.
stock XBGT flywheel,clutch+ spare twin disc GT clutch,slave cylinder, clutch fork, thrust bearing, fully rebuilt box, new syncros and bearings, detailed, output yolk.
No pedals
Only done 4000 Kms since rebuild.
Shoud mention everything is painted in 2Pac and either chromed or zinc plated.
The factory shifter took me over 10 hours to repair the wear. hardface welded all the working faces and ground back for good fit, then rezinc plated. New spring and reverse light.
The box was stripped and bead blasted after hours of diegrinding ect ect. new layshaft, bearings, dogs, syncros, springs. replaced the shifter forks, new seals no leaks.
BEFORE

DURING

AFTER

Pm with an offer. :O)

xe351 · 20-09-2012, 06:24 PM

Quote:

Originally Posted by XA5800

Hi Guys
Looking for ........ rear window winders coupe
Cheers Brett

i have a set (front and rears) for coupe i was thinking of parting with if your still looking for them?

JG65TE · 20-09-2012, 07:34 PM

Quote:

Originally Posted by XA5800

Hi Guys
Looking for MOROSSO Chrome rocker covers to suit cleveland & factory xa engine bay wiring loom, rear window winders coupe & have a spare rear bar for xa with mounting brackets, requires rechroming but straight
Cheers Brett

Drop 1 s from moroso mate. Vpw used to sell em if u haven't looked there yet.

sparky xc · 28-10-2012, 02:43 PM

Hi guys,

I am looking for a XC dash & horns to suit a GXL

bionic2006xr6t · 19-11-2012, 02:29 AM

Hi guys,
Like I have listed may places before I'm chasing a passenger’s side coup seat adjuster/reclining mechanism if anyone can help. I will buy a pair if you’re unwilling to separate. Hoping to find that one person who can help me out. I will also take a right as I have someone I can swap a right for a left with. I thought that surly there would be more pairs of these out there than actual coupes left in existence but I being proven wrong. PS I have seen the right hand one on eBay but I obviously have to win it first......

Cheers Ryan

opto · 12-12-2012, 11:29 PM

XB Centre Consoles, how much are they in good condition or is there someone out there who restores Centre Consoles. A few years ago I had a link to a business that restored Centre consoles and sold them, cannot remember their name... Any help here ?

neptune blue · 15-12-2012, 01:29 AM

Quote:

Originally Posted by opto

XB Centre Consoles, how much are they in good condition or is there someone out there who restores Centre Consoles. A few years ago I had a link to a business that restored Centre consoles and sold them, cannot remember their name... Any help here ?

Good centre consoles are still around but have increased in price
You are going to pay a couple of hundred for a reasonable one
Then it may need to be re coloured the lid might need re skinning re chrome the trim, new insert etc

I've done a few and you can be looking at $300.00 or even more to refurb depending on what needs to be done

A lot of consoles have had holes drilled into them and they are hard to fix and time consuming. You can't just weld up the hole , you have to duplicate the pattern which I have done but its costly and in my opinion not worth the expense

So my advice to you is that you are better off buying a good one and paying a little more for it cos this will save you money in the long run as it may only need a colour change and perhaps an insert which all up would be around $115.00

xcburger351 · 02-01-2013, 03:13 AM

Hey hey !! Guys I'm chasing the interior pillar molds for my XC coupe, mine are rather pathetic lol cheers Ada

xcburger351 · 02-01-2013, 03:14 AM

[QUOTE=xcburger351;4571353]Hey hey !! Guys I'm chasing the interior pillar molds for my XC coupe, mine are rather pathetic lol cheers AdamQUOTE]

351 DUDE · 06-01-2013, 08:57 AM

have a set of xc coupe seats front and rear all, have all the rails and recline perfectly, the drivers side is missing the cover plate behind the reliner but i think they are the same as a a sedan.
they are not torn but are grey vynal so could do with a re trim.
pm me if your interested. charlie