Go Back   Australian Ford Forums > Club and Speciality Forums > Forum Community Car Clubs > OzECruisers (E/N/D Series) > OzECruisers General Discussions

OzECruisers General Discussions E/N/D vehicles General Discussion ONLY. NO TECH THREADS

Reply
 
Thread Tools Display Modes
Old 14-01-2005, 04:53 AM   #1
Danny
GT4.
 
Danny's Avatar
 
Join Date: Dec 2004
Posts: 4,218
Default Finally, some stereo Progress...... (pics inside)

Ok I'm tired now but to cut a long story short, I was bored a couple of days ago, so I went for a drive to Preston JB HiFi. That visit turned out to be expensive, as I walked out with 2 sets of speakers that I hadn't planned on getting. I got a great deal on them, and ****ed off the JB staff with my bargaining, so I walked out happy.

The speakers i got were 6" Pioneer Bullit (They are silver with a madonna breast like cone in the middle) Splits for the front, and the same thing for the rear but three way. 6" so I can easily put the stock stuff back in when the car goes, and so It was possible for me to install it!

Installed the rears easily with the help of me good mate Mustang Nicko, but the splits I decided to try on my own. So I called Yagz at about 10:30PM for some assistance, and he gave me the confidence to give it a go: ("F**kin hell Danny! I tried it once, and never will I try it again. HA Good luck to ya buddy...").

Anyways here I am, No major dramas (apart from having to re position the tweeter), drivers side is done!


I also found the source of my 6 month old door rattle, Few cable ties later, shes not rattlin no more! :

Heres the back speakers covered by the original covers for like, full sleeperness n'shit... sickk :


Cant wait to hear it when its all done, and before you ask, my subbie and 5 channel amp are on their way in the next month or so....

-Dan

Last edited by Danny; 14-01-2005 at 04:56 AM.
Danny is offline   Reply With Quote Multi-Quote with this Post
Old 14-01-2005, 06:25 AM   #2
Mike Gayner
FF.Com.Au Hardcore
 
Mike Gayner's Avatar
 
Join Date: Jan 2005
Location: Tauranga, New Zealand
Posts: 1,488
Default

Do most 6" speakers fit onto Falcon parsel trays without needing spacers?
Mike Gayner is offline   Reply With Quote Multi-Quote with this Post
Old 14-01-2005, 07:51 AM   #3
bindi
Redhead extraordinaire...
 
bindi's Avatar
 
Join Date: Jan 2005
Location: Blue Mountains, NSW
Posts: 2,049
Default

I found I needed spacers cos of the gas tank... otherwise I can't see why they wouldn't fit.

Looks lervely, very professional.

Also love this little guy but as yet have no reason to use him, so I'm gonna use him just BECAUSE HE'S CUTE - :
__________________
Bindi
88 EA- his car
88 Rolla - MY car

Quote:
Originally Posted by big_waity
Oh, and another surefire symptom will be the Falcon badge at the back.
bindi is offline   Reply With Quote Multi-Quote with this Post
Old 14-01-2005, 09:05 AM   #4
EFFalcon
Last warning
 
EFFalcon's Avatar
 
Join Date: Dec 2004
Location: Mornington Peninsula, Victoria HeadCount: 3
Posts: 11,194
Default

yeah, there is no problems putting 6" and sometimes 6.5" speakers in the rear... i've got LPG and some 3 way kenwood 6" speakers and they sit in nicely

GOod work on the install Danny, speaker installs are one thing that is essentially easy to do and saves u some cash (unless u have to run speaker wire.. i hate that)

I've done the same as u with the stock rear covers, just seems to suit the parcel shelf nicely :P

installing the new amp will be the fun part... speaker wire into the front doors... *shudder*
__________________
FALCN6 - Turbo, Air Bag Suspension - Hibernating
EL GT - Supercharged
NASCAR - 83 Thunderbird , Bagged
DAILY - BA Fairlane Ghia, Boss 260 Turbo
OFFROADER - Ford Explorer
EFFalcon is offline   Reply With Quote Multi-Quote with this Post
Old 14-01-2005, 11:02 AM   #5
Thanatos
E-Series Owners Club
 
Thanatos's Avatar
 
Join Date: Dec 2004
Location: Sth. East. Suburbs, Melbourne
Posts: 781
Default

Looking awesome mate! ;)

What 5 channel amp did you decide to get?

I wouldn't mind upgrading my US Audio 5 channel amp for a better one, but 5 Channel amps seem to be few and far between...
Thanatos is offline   Reply With Quote Multi-Quote with this Post
Old 14-01-2005, 11:02 AM   #6
Thanatos
E-Series Owners Club
 
Thanatos's Avatar
 
Join Date: Dec 2004
Location: Sth. East. Suburbs, Melbourne
Posts: 781
Default

Oh, BTW, GOD ONLY KNOWS why it's called U.S Audio!

It's made in MOORABIN FFS!!!!
Thanatos is offline   Reply With Quote Multi-Quote with this Post
Old 14-01-2005, 11:59 AM   #7
InitialD
Low and Loud
 
InitialD's Avatar
 
Join Date: Dec 2004
Location: Melbourne
Posts: 3,273
Default

Quote:
Originally Posted by Thanatos
Oh, BTW, GOD ONLY KNOWS why it's called U.S Audio!

It's made in MOORABIN FFS!!!!
Really???? I actually thought they were made in the US :


How do the Splits sound in the front? I know a few peeps with those Pioneer Splits and some sound great but one mate they sounds like crap.
__________________
1993 Ford Fairlane NC3 Silver - LTD mockup, Worked V8 & Auto, Fully Optioned, Half of my Audio department at work installed in the car

1993 Ford Falcon XR6 Poly Green Stationwagon - 4.0 I6, Auto, 3:45LSD, All the usual XR6 Stuff but in a wagon :
InitialD is offline   Reply With Quote Multi-Quote with this Post
Old 14-01-2005, 12:05 PM   #8
niko
likes falcon's
 
niko's Avatar
 
Join Date: Jan 2005
Location: Melbourne
Posts: 6,091
Default

u have room in the dash for the tweeters the bits right in the corners funny shaped plastic,
__________________
www.carhubsales.com.au
niko is offline   Reply With Quote Multi-Quote with this Post
Old 14-01-2005, 12:21 PM   #9
hambo_12
Guest
 
Posts: n/a
Default

looks the goods, very neat too...
  Reply With Quote Multi-Quote with this Post
Old 14-01-2005, 12:30 PM   #10
neb
hibernating
 
neb's Avatar
 
Join Date: Dec 2004
Posts: 2,135
Default

i like how you did the tweeters... looks pretty funky!
neb is offline   Reply With Quote Multi-Quote with this Post
Old 14-01-2005, 12:32 PM   #11
Stevo
FF.Com.Au Hardcore
 
Join Date: Dec 2004
Location: Sth East Melb
Posts: 2,357
Default

very cool dan
Stevo is offline   Reply With Quote Multi-Quote with this Post
Old 14-01-2005, 12:44 PM   #12
Danny
GT4.
 
Danny's Avatar
 
Join Date: Dec 2004
Posts: 4,218
Default

Quote:
Originally Posted by niko
u have room in the dash for the tweeters the bits right in the corners funny shaped plastic,
Sif I could be bothered trying to get em in there niko! When the amp and sub come, i'll have the money for a professional install. Installing the splits was hard enough.

I'm about to go out and start the passenger side now, i'll let you all know how she goes and sounds at the conclusion of the days work!

Thanks for the comments
Danny is offline   Reply With Quote Multi-Quote with this Post
Old 14-01-2005, 01:02 PM   #13
neb
hibernating
 
neb's Avatar
 
Join Date: Dec 2004
Posts: 2,135
Default

its actually easier to install the tweeters behind the dash in the factory location instead of the custom install you did. i think it looks cool how you've done it.. but from experience i found that they sound better in the factory spot. kinda too in your face when they are that close.. but see how they go!
neb is offline   Reply With Quote Multi-Quote with this Post
Old 14-01-2005, 01:03 PM   #14
niko
likes falcon's
 
niko's Avatar
 
Join Date: Jan 2005
Location: Melbourne
Posts: 6,091
Default

i got a mate to hack up my ea 4" holes and i fit in some front 6'' coaxials nicely enough ran new cabling to, its not that hard (but i dont have room for tweeters, dont think anyway) coaxials are trebly enough for me though anyway...
__________________
www.carhubsales.com.au
niko is offline   Reply With Quote Multi-Quote with this Post
Old 14-01-2005, 01:15 PM   #15
Smoked
Burnin Rubber
 
Smoked's Avatar
 
Join Date: Jan 2005
Location: Melbourne, Victoria
Posts: 1,824
Default

Looks good mate. Like the install location of the tweeters, have heard them in johns car (EFfalcon) and in another mate who had them in factory position. Always better where you have them, simply because the sound is focused towards you.
__________________
2001 AUII Forte (LPG)
K&N Air Filter
Tickford Air Intake
***Coming Soon: Clear Side Repeaters***
Quote:
Originally Posted by The-ShowStoPPa
...dont get me wrong this 3.8v6 is pretty special, it does come with the popular shake rattle and roll option and the auto compliments this with the ever popular snap crackle and pop feature
Smoked is offline   Reply With Quote Multi-Quote with this Post
Old 14-01-2005, 01:20 PM   #16
Yagz
Banned
 
Join Date: Dec 2004
Location: Melbourne
Posts: 522
Default

Hhahaha, sorry for the dim vote of confidence, but seriously, i will never do it again, but you're job seems great!

How'd you go with the crossovers? Did ya get the speaker wire through everywhere ok?

How do they sound running off the Headunit?

Cheers Bloke,
Yagz
Yagz is offline   Reply With Quote Multi-Quote with this Post
Old 14-01-2005, 01:34 PM   #17
niko
likes falcon's
 
niko's Avatar
 
Join Date: Jan 2005
Location: Melbourne
Posts: 6,091
Default

and youde be best off getting 4channel amp for 6"s and another 2channel for your sub
__________________
www.carhubsales.com.au
niko is offline   Reply With Quote Multi-Quote with this Post
Old 14-01-2005, 01:45 PM   #18
EFFalcon
Last warning
 
EFFalcon's Avatar
 
Join Date: Dec 2004
Location: Mornington Peninsula, Victoria HeadCount: 3
Posts: 11,194
Default

I found it easier to put them in the same place as Dan because i was able to put the crossover in the doors... saved me having to run speaker wiring in and out of the door
__________________
FALCN6 - Turbo, Air Bag Suspension - Hibernating
EL GT - Supercharged
NASCAR - 83 Thunderbird , Bagged
DAILY - BA Fairlane Ghia, Boss 260 Turbo
OFFROADER - Ford Explorer
EFFalcon is offline   Reply With Quote Multi-Quote with this Post
Old 14-01-2005, 03:05 PM   #19
XRated
Shoot.
 
XRated's Avatar
 
Join Date: Jan 2005
Location: Melbourne
Posts: 4,909
Default

Nice work Dan. I can't wait to get my system to the specs I want. Mmm tweeters :

Quote:
Originally Posted by niko
and youde be best off getting 4channel amp for 6"s and another 2channel for your sub
I would suggest a mono block for a sub :
__________________


20V Turbo

XRated is offline   Reply With Quote Multi-Quote with this Post
Old 14-01-2005, 03:38 PM   #20
Danny
GT4.
 
Danny's Avatar
 
Join Date: Dec 2004
Posts: 4,218
Default

Quote:
Originally Posted by EFFalcon
I found it easier to put them in the same place as Dan because i was able to put the crossover in the doors... saved me having to run speaker wiring in and out of the door
Yeah I definitely didn't wanna do that!!
Anyways Its finished now, and It sounds pretty awesome! I have the annual 2005 playing at the moment, and some chilled house and boy is the sound refined! Looking forward to hearing the speakers post amp installation!

Yagz, all went well with the crossover box, I had to drill two small holes on each side because there wasn't any that lined up! The box is at the bottom of each door toward the rear of the car just near the hole in the doorframe where the Ghia door courtesy lights are placed. No dramas with the window or wires touching the window! All good. I love cable ties!

Now to do some chap laps tonight!! :

Cheers and beers, :
-Dan
Danny is offline   Reply With Quote Multi-Quote with this Post
Old 14-01-2005, 04:57 PM   #21
neb
hibernating
 
neb's Avatar
 
Join Date: Dec 2004
Posts: 2,135
Default

Quote:
Originally Posted by EFFalcon
I found it easier to put them in the same place as Dan because i was able to put the crossover in the doors... saved me having to run speaker wiring in and out of the door
the hard part is just getting one wire through the hard places.. once you get one through its easy to just tie the other wire to that one and pull it through.
neb is offline   Reply With Quote Multi-Quote with this Post
Old 14-01-2005, 08:08 PM   #22
Thanatos
E-Series Owners Club
 
Thanatos's Avatar
 
Join Date: Dec 2004
Location: Sth. East. Suburbs, Melbourne
Posts: 781
Default

I've known quite a few people who have killed their crossovers from the shock of the door constantly closing (Rmyers was one of them), so i mounted mine up under the dash.

Although, my tweeters are just near the stock location, so i only had to run one wire through to the door...
Thanatos is offline   Reply With Quote Multi-Quote with this Post
Old 14-01-2005, 08:18 PM   #23
Danny
GT4.
 
Danny's Avatar
 
Join Date: Dec 2004
Posts: 4,218
Default

Quote:
Originally Posted by Thanatos
I've known quite a few people who have killed their crossovers from the shock of the door constantly closing.
: : Oh. No.
Danny is offline   Reply With Quote Multi-Quote with this Post
Old 14-01-2005, 08:33 PM   #24
Mike Gayner
FF.Com.Au Hardcore
 
Mike Gayner's Avatar
 
Join Date: Jan 2005
Location: Tauranga, New Zealand
Posts: 1,488
Default

Anyone know an easy way of chopping the rear parcel shelf for a tidy 6" speaker install? Alternatively, what models came with rear speakers already installed, and is it difficult to remove the parcel shelf all in one go? Might pay to just go to a wrecker and get the whole parcel shelf with holes cut and speaker covers in it. Cheers guys.
Mike Gayner is offline   Reply With Quote Multi-Quote with this Post
Old 14-01-2005, 08:33 PM   #25
Psycho Chicken
Banned
 
Psycho Chicken's Avatar
 
Join Date: Dec 2004
Location: South East Melbourne
Posts: 6,156
Default

I seriously need to learn something about car audio lol

WTF are crossovers? hahaha I'm an idiot.....
Psycho Chicken is offline   Reply With Quote Multi-Quote with this Post
Old 14-01-2005, 08:39 PM   #26
Inferno
Mr Forty Seven
 
Inferno's Avatar
 
Join Date: Dec 2004
Location: Queensland
Posts: 536
Default

Those are nice speakers, I had the same setup back in 2002, the same front spilts and the same rears. I blew up a a front pair within a month, too much bass, then upgraded to the yellow pro series.

Good thing about the rear speakers thou is you can throw carp loads of bass through them without needing a sub. And they aren't even 6x9's
__________________
EFII Fairmont Ghia
Fully Optioned In White
XR Kit, Engine & Springs. Leather & Sunroof

Also Featuring

NFERNO Registration Plates
ELXR Front Bar & Bonnet with Sequential Scoop
18x8 Graphite Rims, Genie Extractors and Exhaust, Chrome Moulds
ELGT Steering Wheel, Clear Repeators, Cornering Lamps, Tinted Windows
Walnut Highlights, Pionner DEH-P9650MP Headunit & Pro-Series Speakers

Local Playground: Brisbane CBD and surrounding suburbs
Inferno is offline   Reply With Quote Multi-Quote with this Post
Old 14-01-2005, 09:30 PM   #27
SileNceR
02/90 EA II Fairmont
 
SileNceR's Avatar
 
Join Date: Jan 2005
Location: Warrnambool, VIC
Posts: 713
Default

my crossovers are in my doors (where the map pocket goes on an EA, have my pod over this area) and haven't had any problems so far... touch wood... (same splits as yours danny)
__________________
211RWKW EA
SileNceR is offline   Reply With Quote Multi-Quote with this Post
Old 14-01-2005, 09:57 PM   #28
Walkinshaw
Two > One
 
Walkinshaw's Avatar
 
Join Date: Dec 2004
Location: Adelaide
Posts: 7,063
Default

My crossovers are in the boot, running 3 lines of 12awg UTP speaker cable down each side isnt fun at all..... ;(

looks good mate ;)
__________________
1978 LTD - 408ci - 11.5@120.6mph -
2004 S4 - 4.2 - M6 - quattro -

Walkinshaw is offline   Reply With Quote Multi-Quote with this Post
Old 14-01-2005, 10:17 PM   #29
Thanatos
E-Series Owners Club
 
Thanatos's Avatar
 
Join Date: Dec 2004
Location: Sth. East. Suburbs, Melbourne
Posts: 781
Default

Quote:
Originally Posted by The Child
: : Oh. No.
Don't worry too much, mate...

I've also known plenty of people who have mounted them in the doors and haven't had any problems.

Maybe the pioneer crossovers are better built than Rmyers' Focal Utopias :P lmao. :P
Thanatos is offline   Reply With Quote Multi-Quote with this Post
Old 14-01-2005, 10:18 PM   #30
Thanatos
E-Series Owners Club
 
Thanatos's Avatar
 
Join Date: Dec 2004
Location: Sth. East. Suburbs, Melbourne
Posts: 781
Default

Quote:
Originally Posted by Mike Gayner
Anyone know an easy way of chopping the rear parcel shelf for a tidy 6" speaker install? Alternatively, what models came with rear speakers already installed, and is it difficult to remove the parcel shelf all in one go? Might pay to just go to a wrecker and get the whole parcel shelf with holes cut and speaker covers in it. Cheers guys.
Just lay down in the boot and cut through from underneith using a stanley knife. VERY easy to do, it only took me 5 mins to do mine...
Thanatos is offline   Reply With Quote Multi-Quote with this Post
Reply


Forum Jump


All times are GMT +11. The time now is 04:25 PM.


Powered by vBulletin® Version 3.8.5
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Other than what is legally copyrighted by the respective owners, this site is copyright www.fordforums.com.au
Positive SSL