|
|
|
|
|
|
Welcome to the Australian Ford Forums forum. You are currently viewing our boards as a guest which gives you limited access to view most discussions and inserts advertising. By joining our free community you will have access to post topics, communicate privately with other members, respond to polls, upload content and access many other special features without post based advertising banners. Registration is simple and absolutely free so please, join our community today! If you have any problems with the registration process or your account login, please contact us. Please Note: All new registrations go through a manual approval queue to keep spammers out. This is checked twice each day so there will be a delay before your registration is activated. |
|
|||||||
 |
|
|
Thread Tools | Display Modes |
12-02-2007, 01:00 PM
|
#1 | ||
|
Starter Motor
Join Date: Sep 2006
Posts: 7
|
I just got to work and noticed that my rear tyres are stuffed, in fact one is so bad it looks like if I drive on it again I'll delaminate it.
Now the question is, can I run a set of 205/60's on the rear without any ill effects? Thanks for your help Curare |
||
|
|
|
12-02-2007, 09:36 PM
|
#2 | ||
|
Over Thinker
Join Date: Dec 2005
Location: Ipswich Qld
Posts: 1,351
|
you can only run the tyres specified on the tyre placad /sticker
should be under the bonnet in the glovebox or on a door frame/ask a tyre supplier
__________________
My car goes Brumm Brumm |
||
|
|
|
|
13-02-2007, 12:01 AM
|
#3 | ||
|
Regular Member
Join Date: Jan 2007
Posts: 51
|
I also have trouble with rear tyres on the AX. In the past I have delaminated to the steel belts. I found the rear rotors warped when I took them off and lay them on flat concrete. New rotors seem to have solved the problem and rotate the tyres regulary.
|
||
|
|
|
|
14-03-2007, 04:34 PM
|
#4 | ||
|
In the family since 1996
Join Date: Jan 2005
Location: Essendon
Posts: 261
|
205/55/15", toyo had a good tyre out a few years back when i had a tx-5
|
||
|
|
|
AX tx5 tyres
Linear Mode
