What did you do to your car today?

[Neale]

Polished up an old rocker cover & put it on

[revcore]

Finally got round to giving the old girl a birthday...Vacuumed the interior then gave the ute a wash followed by a quick polish. Came up pretty nice.
Also put my new Ford Bougicord leads on this morning too. The Hurricane leads were only 7.0mm thick and were buggered where they plug into the coil pack. Now with the new leads there is no more miss and it idles real nice.

[Feathers]

Spent 3 hours washing, clay bar, polish, waxing the car today.
Going to vacuum inside tomorrow.

[JC]

Got the territory back from smash epairs yesterday - RH side is all smooth soft and shiny. So we dropped the 22s and tyres off to the tyre place this morning, and got tyres fitted and wheel alignment - so now we have the 22s back on the Territory.

Then put the 15s back on the ED XR8, and am looking to sell the 19s from the ED and the territory.

So that means 17s are also back on the 380 (that was earlier in the week).

[jaydee]

Young bloke is in the US for a holiday and I've been meaning to fix his floppy gear stick in his 626 ( no smart alec comments now please).
Ordered some new bushes from Mazda, what a piece of cake, up on the car ramps, underneath with a 12 mil ringy and socket, 45 mins later, job done, gear stick nice and firm ( I said, no funny comments).

[SLO AU XR8]

Planned to tow my car to a mates and pull the busted 5L out. Nothings happened.....

[wadexr583]

Fitted 33mm adjustable sway bar to the ute. Went to the second hardest setting, blimey it steers well now not to mention sitting flatter. Had to change to sway bar ball joints as mine were stuffed, sounded like they were falling off on every bump in the road. Thought may as well change the whole bar while I'm under there. Glad I did. Oh and took 2 trips to supercheap to get the correct deep socket size, grrrrr.

Wade

[buggerlugs]

moved it.....................

[chevypower]

Originally Posted by MLR

Dont be : (

This is what we could pay for a second hand 2012 one > http://www.carpoint.com.au/all-cars/...-12452146&Cr=0

How much are they in your neck of the woods?

2012 Laramie crews are going for about $50k, the 2013 I drove had the sticker price of about $58k, but discounted to $55k. The 3500 will have an Aisin tranny, stronger frame, and more power and torque! 287 kw/1150 Nm. Not too bad for stock specs

[XB GS 351 Coupe]

Fitted rear speakers and dynamatted rear parcel shelf.

[XR8_ash]

Put a pair of new rear shocks in....

Sent from my HTC Velocity 4G using Tapatalk 2

[revcore]

I polished up the rollbar on my AU ute today...Came up real nice too. All I used was Autosol polish and a rag.

[martyal44]

replaced the driver's seat trim piece that had torn off front mounting point and wouldn't hold with glue..looks a lot better.

[XB GS 351 Coupe]

Washed it after getting it covered in mud

[my_gxl]

Replaced the fuel injectors.

[BA-XT]

Admired it, drove it to shops, put back in garage, admired it some more, closed the garage. Enough excitement for one day.

[my_gxl]

This morning i gave it an auto service, and its off now getting wheel aligned.
The fresh injectors actually made it not quite as boring.
Here's hoping for an economy increase.

[brydie76]

1 month service, got som floor mats while I was at it. Was going to get boot protector too, but it was over- $300.

This weekend, heading to Clark Rubber to get one cut to size for $50. Even they guy at the service desk agreed the price for the genuine one was crazy...

[my_gxl]

Originally Posted by my_gxl

This morning i gave it an auto service, and its off now getting wheel aligned.
The fresh injectors actually made it not quite as boring.
Here's hoping for an economy increase.

Just gave the thing another coil too. Seems the injectors triggered something.

Seems fine now though.

[ryeman]

Gave the steering wheel the Rivers shoe leather treatment, makes it VERY grippy.

[revcore]

Put rear speakers in my AU V8 ute today. There was no factory wiring for them so I wired them up to the speaker wiring for the front speakers at the plug behind the stereo. Work well and the speaker wiring is hidden under the carpet...Very happy with it.

[MLR]

Purchased a Fleabay exhaust for the BF, was meant to be a direct fit up to the centre muffler for the rear muffler delete.

And yes, I only did it for some more noise.

Put the car up on the plant ramps and:

Of course it didn't fit, the flange was the wrong size and the orientation was about 30 deg out.

1hr in a exhaust shop later and all is well but my wallet is lighter, it does sound good with nil drone.

Lesson learnt: don't buy anything of Fleabay that bolts to something which has angles and dimensions, it will end up being cheaper getting it done in a shop, you will not get angry and walk off swearing and you will not feel like a tool taking it to the exhaust shop and explaining to them that you got it as it was cheap, then explain to them your awesome cheap exhaust doesn't fit and could they please fix up without saying things like, this happens all the time and its not so cheap now is it........

[1TUFXB]

Rebuilt the motor about 8 times today in my head , that's been going on for weeks.
Almost ready to shell out the bucks..........

[LG17]

Looked at it through the kitchen window...

But I did order some more bits from England for it!

[Vincenzo]

Put 62 litres of fuel in for $105. Hate that beeping sound every time you start it up.

Cheers Vincenzo

[TC200six]

Gave the driver's side footwell a vacuum. First time this year.

[Mesa]

Installed the rear seat belts properly.

[Papa Smurf]

Changed the exhaust on my Silva today. The new one came from a donor car and that one got my chaff cutter exhaust off Silva. Sounds SO much better.
One thing I have to say is, I DO wish that manufacturers would stop using slide into muffler tail pipes, they are a PITA. The install of the system that had a BOLT ON tail pipe took 30 mins less.

[OffRoadFalcon]

Proper mudflaps and UHF radio with two antennas!

[FAT245]

Started ripping apart the 5L So the new parts can be ready for bolt on!