Re: Does Anyone Here Fly Drones??
|
|
not seen those rubber spacers before... interesting idea, not really needed, but interesting.
I have a frame that i needed to remove all the plugs from the fc to get it to fit, a proper lowrider! that was an interesting build! Looking forward to building the 6s rig though. (thats 6s battery, not 6inch frame) Smaller mah but longer flight times.
Definately upgrade the gimbals. I run a m9-r on the throttle and a normal m9 on the other. Wouldnt change it for anything now.
what rx and vtx and fc you using?
and added to the group. Ask as many daft questions as you want there as thats what the group is for!
__________________
Rebuilt Boss260 with #Kellogs 1500hp forged and balanced crank#Manley forged flattop pistons with a 9.5/1cr#4340 forged h-beam rods with arp bolts#Clevit performance rod and main bearings#full ARP headstud kit#total seal rings#Mantic twin plate development clutch and lightened flywheel#Mellings uprated oil pump#Mainforce Performance Supercharger kit#AU motorsport 345mm big brake kit.
Now producing 369.7rwkw/496rwhp@6000 and 515ft/lb torque @ 11 psi.
Now sat on an engine stand going nowhere
|