Quote:
Originally Posted by Tassie f100
As an aside I have used the same weld trick to remove gearbox spigot bearing outers from the end of the cranshaft.If you can’t pull the bearing out complete,then break it up and use weld to shrink the outer,when it cools the bearing just slips out.
|
On car size stuff, I love the old trick of stuffing full of grease then tapping a bolt wrapped in electrical tape into the opening forcing the spigot out.
__________________
heritagestonemason.com/Fordlouisvillerestoration
In order that the labour of centuries past may not be in vain during the centuries to come...... D. Diderot 1752