Re: Quick question re: DRL's
|
|
Ok, so mine is wired up and working.
However...it appears that my DRL's are not very bright, plus they are not dimming!
It is like they are in "reduced / dimmed" mode all of the time.
Not sure what the problem is.
So instead of being 100% intensity, then reducing to 70% when lights are on. Mine appear to be 70% all the time, not matter if headlights are on or not...
I started by using Pin 10 as per above, however it is for the "dip beam"
I used Pin 5 as it is for the main beam.
Pin 12 is for side lights.
Pin 3 is actually for the Headlight Levelling.
Am I right in saying the following (UK - AUS);
- Sidelights = Parkers
- Main Bean = Headlights
- Dip Beam = High Beam
Or do I have the above around the wrong way and it should be Pin 5???
But would that have any effect on the lights being a constant low intensity, rather than a high intensity that then dims...
I hope the above makes sense...
Glenn
__________________
2016 (MY17) Ford Mondeo Titanium EcoBoost (Moondust Silver)...more power please!
|