Re: Loose steering
|
|
True, Six and Eight is same Intermediate Shaft
The only difference is the V8 Intermediate Shaft has a welded on collar, bigger Bell and Heat shield Foil wrapped around it from the Factory
Slide off the Heat Shielding Foil and Grind off the welds that hold the collar on and bigger bell in place on the V8 Intermediate Shaft, and it will slide straight off
Slide on the Collar and Bigger Bell onto the 6 Intermediate Shaft and tack weld that on
Take note of the position from the V8 Intermediate Shaft, mine was 210mm down to the top of the bell
Slide back over the heat shielding Foil and your ready to go
__________________
XR6T 2002 BA
|