After Finding the problems I got a bit depressed with the whole thing. I ended up undercoating it to help prevent the surface rust. Fitted doors and guards to see how things fitted.
Drivers side caused some issues, Things just didn't align. Found the rear quater seemed to be stressed and not fitted at the correct angle.
Uneven door gap
The Rh side was "Fatter" than the Lh side
And the door lock Pillar "think they call it the B Pillar was not leaning inwards.
Compared to
Needed to get more advise on how to fix the problems.
Not much happened for a while as a couple of "Friends" were going to help with the repair but kept promising and not showing up. I came to the conclusion that if this is going to be fixed I will have to do it myself. I got busy with my business and ended up moving out of a shop and building a shed at home to work from [B]and put the coupe in[B]
More to come.